Topic: ANN HELL()[WORLD]=$IRAJ GPU only P2P exchange test coin . 1st Dynamic MN .. (Read 15371 times)

I have a 1070 and a 1080 pointed at onepool for the time being... should be a steady ~7.5Mh

*edit*  do not use onepool.fr


My balance has been wiped out, and my connection has now started to be refused... the port is offline.


MY account shows as if it has never existed there to mine;
All earned block credit history have been deleted over the past 2 weeks....   (no proof I ever mined a block anymore)

My history missing is very concerning.


This is EXACTLY why I did not want to use a 3rd party pool.


*edit*

 an hour later;  SIRAJ coin has been removed... as well as all other xevan port coins.


I should have ~10K+ coins received from this pool.    I received a Tx of just under 100 coins;  when the total owed (and confirmed) at the time of going to sleep was well over 1500.....    which was ~1-2 hours into mining before walking away for the day.  Blockheight was not a concern when I started mining... i did receive a payout;  but again, a fraction of what was owed; and is stuck on 1 confirmation... I think the network stalled?


@mick;  did something happen to the POS switchover?

Frustrating! Everyone of the discord links shows the amount of people in the group but then when I press join says instant invite invalid or you don’t have permission to join the group... can someone send @Crypto_Pugz a direct invite through discord please?

It is your last chance to get in guys.

Due to a masternode bug that needs to be solved, the POW has been extended and will now end at block 17500, so good news for those that like mining.

The nethash rate is low now, so it's not hard to earn enough coins for MN from mining even if you have only 1 GPU card.

I see you updated the code but did not update the 'notes'

https://github.com/spayse/hello_world/compare/stage#diff-7ec3c68a81efff79b6ca22ac1f1eabbaR2212
        nSubsidy = 1000 * COIN; // 2 years -- Emissions: 2.522.880, Cumulative: 4.297.436
        nSubsidy = 250 * COIN; // 2 years -- Emissions: 2.522.880, Cumulative: 4.297.436


So would these be the correct total emissions after 2 years?
// 2 years -- Emissions: 630,720, Cumulative: 2,405,276

Good that you upped the master node value to 65k but now I may need to mine a bit more or buy about 15k more so I can run a master node. Keep up the good work.

Check out the alpha of SIRAJ.   You asked, I listened.   Lower emissions after pow higher mn collateral. Plus,  the first attempt at economic stabilizion .  SIRAJ, the first dynamic MN SYSTEM  an first economic stabilizion based on simple fundamental ideas .

https://github.com/spayse/hello_world/compare/stage

I dont think u need an stratum.. But are you using stratum+tcp in ur miner.bat file? This because u must delete all those stratum+tcp lines.
As u can see in the miner u can also do setgenerate true, this is cpu solo mining. At this moment u dont have a stratum, so there is no reason for you to create a stratum.

Oh gosh i dont care about sharing information, i'm glad i am helping you into the right direction.

1. your problem was the wallet conf file, u didnt knew what to enter and what ports. Last problem about this was the correct port. So if you change the port in the wallet .conf u must also change the port in the miner.bat file
2. Check if the ports are correct in both files
3. what GPU are u using? Are u even be able to gpu mine?
4. how does ur miner.bat looks like?

Edit, this is the XEVAN BITSEND conf, can be that u need this, change ip from 2 -> 1 and the ports:

This right here is pure gold.   Most people and how-to's kinda graze over the necessity of these settings and either tell you to leave them alone in the json;  or don't even mention what they really do.

I have yet to mine to any of my wallets in the past;  so this is a nice bit of info in my eyes....  I know for as long as ive been doing this, I should have known this already...   but i have always been using places like xpool/zpool historically... and avoided "wallets" for any non-major coin like the plague.

Ill get it set up and give it a whirl.

my hashrate isn't insane; (rather mundane) but I would rather point my gear to my internal addresses to mine;  than to point it to a pool.   I wanna do the full-solo on this one... just because.


Do you know what dictates the address that the mined earnings go to by the wallet?  or is it automatically a new address for each signed block?

FYI;  I have added the nodes and everything;  but can't get past either 50% or 75% synced....


*edit* FYI;  I corrected some typos in my quote for others....

now im getting somewhere:
[2018-08-09 05:16:22] NVAPI GPU monitoring enabled.
[2018-08-09 05:16:22] 1 miner thread started, using 'xevan' algorithm.
[2018-08-09 05:16:22] JSON-RPC call failed: Method not found
[2018-08-09 05:16:22] get_work failed, retry after 30 seconds


looks like ill need to set up a stratum host.   Looks like a few firsts on this.   But worth it for the know-how in my eyes.

*double edit*
A bit later, and presto.   Wallet seems like its all synced (no progress bar).  Put on setgenerate true;  and ~25Kh off my i3 its currently running on.

Turns out I don't want to dive into node.js;  so I am looking at takng my Dell Precision R5500 sporting 2x SLAED and 64Gb ECC that is literally just sitting here doing nothing but collecting dust at the ranch (no, literally....), and ill bring it to where my .com is hosted and plug it in.....  

Gonna jump down the rabbit hole and install yiimp.... It has room for GPU's and HDD's galore... so I may go full ham on it and set up my own full-on solo pool.    It seems easy enough to set up all the API keys and configs for autoexchange when all is said and done;  so If I decide to add any old wallet after;  I just need to have HDD space considerations, and do some quick reconfigs.

Right this second I am doing a trial run remotely via ssh on a Pi that's hooked up in that location; and so far;  its going rather smoothly... I may have a yiimp web admin interface to play with shortly.


I do see why you recommended just using a pool;  but I have the gear;  and the knowhow to get it done or figure it out.... and if I run into trouble;  I am always willing to ask or dig into some reference materials.
ccminer just flat out doesn't speak the type of work requests that wallets do.... sgminer still has the support;  but what's the point since AMD cards fall way short on these types of algos.

Im the kind of guy who runs his network connections under at least 3 layers of VPN tunnels.   They are all my own;  and they all do their job... but all of them serve a special and independent purpose primarily.  Secondarily it's the only way I can truly get all of my devices;  everywhere;  to be able to talk to each other as if they were on the same network.  (the wonder of a common TUN).  This just makes several devices end up encapsulated under at least 3 parallel encrypted connections.  (my middle finger to the legal limit of encryption you are allowed to apply to a datastream)

Any particular reason why the Hashrate dropped so much in just a few days? Its now below 40MH/s. The low hashrate did help me get enough coins for MN with just one GPU card really fast, but usually, that kind of a drop is not a good sign.

Also, the windows wallet is very CPU intensive for some reason. I can't even leave the wallet open . It would be nice if this get fixed in the next update.