[ANN] INTENSE COIN - Blockchain backed decentralized VPN - Hybrid PoW - page 25.

ThePigwee

member

Activity: 181

Merit: 46

Lethean COO

Quote from: crypto_117 on April 30, 2018, 06:23:29 PM

Quote from: ThePigwee on April 30, 2018, 12:41:05 PM

Quote from: crypto_117 on April 30, 2018, 09:47:28 AM

Quote from: YaStaer on April 30, 2018, 09:16:00 AM

Quote from: Alu_voin on April 30, 2018, 09:05:23 AM

How to transfer my coins from wallet 1.4.1, to a new wallet 2.0.1?
Give a link to the manual.

https://www.reddit.com/r/IntenseCoin/comments/89gw15/guide_converting_your_141142_wallet_to_the_145/

2.0.1 does not fully sync. Is this beta version?

Where are you stopping with the sync? If it’s close to the top block, the daemon will typically slow down and not load in as quickly as the rest of the chain. If you have not already, we recommend restarting the daemon and starting the sync again. Maybe it’s mt superstition but it seems to sync better if you don’t click away after reopening it.

Wallet says it's synchronized now but the balance and unlucked balance say 0.00000000 while I used to have over 150,000 ITNS in old wallet. Huh

I'm using GUI 2.0.1. Inserted spend key, view key and public adres. What's wrong??

without knowing anything else that was done, I would assume one of two things, either the wrong wallet was opened somehow or you need to refresh the balance. You can close your wallet and reopen it and your ITNS should appear.

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: dragonmike on April 30, 2018, 07:12:45 PM

That sync is brutally slow, despite all command lines suggested above. Hope it can sync, 'cause I've been mining a boatload over the last few weeks...

Indeed it is. I just switched over to 2.0.1 (because 2.0.0 stopped syncing) and even though it was only 1 day behind it took almost an hour to sync. It finally did, though, and my coins are present.

In other news, I've got a stack of coins piling up on the main pool; something might be wrong with payouts there.

dragonmike

hero member

Activity: 1274

Merit: 556

That sync is brutally slow, despite all command lines suggested above. Hope it can sync, 'cause I've been mining a boatload over the last few weeks...

crypto_117

jr. member

Activity: 56

Merit: 1

Quote from: akaRev on April 30, 2018, 06:30:33 PM

create *.bat files into intensecoin dir and run Wink

Quote

Netsh Advfirewall Firewall delete rule name="IntenseV4NodeAllow"

netsh advfirewall firewall add rule name="IntenseV4NodeAllow" program="%cd%\intensecoind.exe" protocol=TCP localport=any action=allow dir=OUT remoteip=140.82.9.90 remoteport=48772

netsh advfirewall firewall add rule name="IntenseV4NodeAllow" program="%cd%\intensecoind.exe" protocol=TCP localport=any action=allow dir=OUT remoteip=62.48.164.60 remoteport=48772

netsh advfirewall firewall add rule name="IntenseV4NodeAllow" program="%cd%\intensecoind.exe" protocol=TCP localport=any action=allow dir=OUT remoteip=5.249.27.162 remoteport=48772

intensecoind.exe --add-exclusive-node 140.82.9.90:48772 --add-exclusive-node 62.48.164.60:48772 --add-exclusive-node 5.249.27.162:48772

I give up and hope they come up with a better wallet version. IntenseCoin is not for beginners it seems.

akaRev

newbie

Activity: 86

Merit: 0

create *.bat files into intensecoin dir and run Wink

Quote

Netsh Advfirewall Firewall delete rule name="IntenseV4NodeAllow"

netsh advfirewall firewall add rule name="IntenseV4NodeAllow" program="%cd%\intensecoind.exe" protocol=TCP localport=any action=allow dir=OUT remoteip=140.82.9.90 remoteport=48772

netsh advfirewall firewall add rule name="IntenseV4NodeAllow" program="%cd%\intensecoind.exe" protocol=TCP localport=any action=allow dir=OUT remoteip=62.48.164.60 remoteport=48772

netsh advfirewall firewall add rule name="IntenseV4NodeAllow" program="%cd%\intensecoind.exe" protocol=TCP localport=any action=allow dir=OUT remoteip=5.249.27.162 remoteport=48772

intensecoind.exe --add-exclusive-node 140.82.9.90:48772 --add-exclusive-node 62.48.164.60:48772 --add-exclusive-node 5.249.27.162:48772

crypto_117

jr. member

Activity: 56

Merit: 1

Quote from: ThePigwee on April 30, 2018, 12:41:05 PM

Quote from: crypto_117 on April 30, 2018, 09:47:28 AM

Quote from: YaStaer on April 30, 2018, 09:16:00 AM

Quote from: Alu_voin on April 30, 2018, 09:05:23 AM

How to transfer my coins from wallet 1.4.1, to a new wallet 2.0.1?
Give a link to the manual.

https://www.reddit.com/r/IntenseCoin/comments/89gw15/guide_converting_your_141142_wallet_to_the_145/

2.0.1 does not fully sync. Is this beta version?

Where are you stopping with the sync? If it’s close to the top block, the daemon will typically slow down and not load in as quickly as the rest of the chain. If you have not already, we recommend restarting the daemon and starting the sync again. Maybe it’s mt superstition but it seems to sync better if you don’t click away after reopening it.

Wallet says it's synchronized now but the balance and unlucked balance say 0.00000000 while I used to have over 150,000 ITNS in old wallet. Huh

I'm using GUI 2.0.1. Inserted spend key, view key and public adres. What's wrong??

korm

member

Activity: 280

Merit: 10

1. TIP from discord

Quote

akaRev - 21:54
create firewall rules for intensecoind.exe access granted to 140.82.9.90:48772 and 62.48.164.60:48772
and all work fine))

2. Download 2.0.1 GUI https://github.com/valiant1x/intensecoinwallet/releases
You can use cli daemon on it with *.bat file

Quote

intensecoind.exe --add-exclusive-node 140.82.9.90:48772 --add-exclusive-node 62.48.164.60:48772 --add-exclusive-node 5.249.27.162:48772

MaxMidnite

newbie

Activity: 143

Merit: 0

Quote from: ThePigwee on April 30, 2018, 12:41:05 PM

Quote from: crypto_117 on April 30, 2018, 09:47:28 AM

Quote from: YaStaer on April 30, 2018, 09:16:00 AM

Quote from: Alu_voin on April 30, 2018, 09:05:23 AM

How to transfer my coins from wallet 1.4.1, to a new wallet 2.0.1?
Give a link to the manual.

https://www.reddit.com/r/IntenseCoin/comments/89gw15/guide_converting_your_141142_wallet_to_the_145/

2.0.1 does not fully sync. Is this beta version?

Where are you stopping with the sync? If it’s close to the top block, the daemon will typically slow down and not load in as quickly as the rest of the chain. If you have not already, we recommend restarting the daemon and starting the sync again. Maybe it’s mt superstition but it seems to sync better if you don’t click away after reopening it.

Its a issue on your side, I done restart multiple times, for me block 5775 does not move past. I tried sync waller and CLI etc..
Also user reported on github issue straight away..

ThePigwee

member

Activity: 181

Merit: 46

Lethean COO

Quote from: crypto_117 on April 30, 2018, 09:47:28 AM

Quote from: YaStaer on April 30, 2018, 09:16:00 AM

Quote from: Alu_voin on April 30, 2018, 09:05:23 AM

How to transfer my coins from wallet 1.4.1, to a new wallet 2.0.1?
Give a link to the manual.

https://www.reddit.com/r/IntenseCoin/comments/89gw15/guide_converting_your_141142_wallet_to_the_145/

2.0.1 does not fully sync. Is this beta version?

Where are you stopping with the sync? If it’s close to the top block, the daemon will typically slow down and not load in as quickly as the rest of the chain. If you have not already, we recommend restarting the daemon and starting the sync again. Maybe it’s mt superstition but it seems to sync better if you don’t click away after reopening it.

ThePigwee

member

Activity: 181

Merit: 46

Lethean COO

Quote from: leonsnow on April 30, 2018, 10:58:21 AM

Did anyone get SE withdrawal issue on large amount ITNS? For me, 3xxx withdrawal is okay. However, when I tried to withdraw 3xxxx ITNS to my local wallet, I only got 3xxx ITNS instead. Just got 1/10 what I want. And the 3xxxx was deducted from my SE balance.
I use 2.0.1 CLI to check the local wallet.

I’m sorry you are having an issue with Stocks.Exchange. This is something on the exchange side of things. You would need to reach out to the exchnage and ask for additional information about what happened or to have them send the correct amount to your walllet. I’m sorry that you had an issue.

SlowGrowth

sr. member

Activity: 490

Merit: 264

| Privacy Advocate | Game Theory | Free Thinker |

I apologize for all the issues everyone is experiencing but this is due to a lot of nodes still being in old v3 chain... Since we cant hardcode good nodes like in bitcoin versions we are thinking on a more creative way to fix this on our end... Obviously it would help if most of the nodes were on the v4 chain...

Thank you for understanding and we will get this fixed

SlowGrowth

sr. member

Activity: 490

Merit: 264

| Privacy Advocate | Game Theory | Free Thinker |

Quote from: crypto_117 on April 30, 2018, 11:36:41 AM

I'm afraid this coin is scam. Cry

We have been very busy and sometimes we cant get here in time however if you want faster assistance please join our Discord.

Try asking for help before calling a 15+ team a scam

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: Vlizzjeffrey on April 30, 2018, 11:31:11 AM

So i gave mining this a shit, but if i cant even get a full sync on the wallet, im going back to mine Stellite.
Left my pc overnight so the intensecoin wallet could sync, but no succes, i give up.
Maybe if the wallet would work decently this coin would attract some miners, not like this tho...

Did you add the exclusive nodes to the command line for the daemon? See @YaStaer's previous post:

Quote from: YaStaer on April 27, 2018, 11:37:24 PM

Quote from: xiaopihai on April 27, 2018, 10:55:27 PM

SYNCHRONIZATION started
2018-04-28 01:29:23.606 [P2P3] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:305 [178.43.154.108:48772 OUT] Sync data returned a new top block candidate: 172130 -> 179090 [Your node is 6960 blocks (9 days) behind]
SYNCHRONIZATION started'

Can't sync after this, the wallet is using the latest version, and the wallet has never been run on this computer before

Code:

intensecoind.exe --add-exclusive-node 140.82.9.90:48772 --add-exclusive-node 62.48.164.60:48772 --add-exclusive-node 5.249.27.162:48772

crypto_117

jr. member

Activity: 56

Merit: 1

I'm afraid this coin is scam. Cry

MaxMidnite

newbie

Activity: 143

Merit: 0

Quote from: Vlizzjeffrey on April 30, 2018, 11:31:11 AM

So i gave mining this a shit, but if i cant even get a full sync on the wallet, im going back to mine Stellite.
Left my pc overnight so the intensecoin wallet could sync, but no succes, i give up.
Maybe if the wallet would work decently this coin would attract some miners, not like this tho...

Yes I agree also, exact same issue...

Vlizzjeffrey

hero member

Activity: 784

Merit: 503

Bitcoin King BTC

So i gave mining this a shit, but if i cant even get a full sync on the wallet, im going back to mine Stellite.
Left my pc overnight so the intensecoin wallet could sync, but no succes, i give up.
Maybe if the wallet would work decently this coin would attract some miners, not like this tho...

leonsnow

copper member

Activity: 138

Merit: 2

Did anyone get SE withdrawal issue on large amount ITNS? For me, 3xxx withdrawal is okay. However, when I tried to withdraw 3xxxx ITNS to my local wallet, I only got 3xxx ITNS instead. Just got 1/10 what I want. And the 3xxxx was deducted from my SE balance.
I use 2.0.1 CLI to check the local wallet.

crypto_117

jr. member

Activity: 56

Merit: 1