Wait can some dev properly answer this:
Is the entire launch from roughly 11 hours ago useless, and has been replaced?
So not only did you waste a bunch of peoples' time and mining - I know I stayed up late where I am to make it to this launch - you did a ninja relaunch?
Will my old wallet address work?? I was mining to that wallet overnight, having set all my miners and then gone to bed. Way to screw over a whole 11 hours of my mining if not.
Your team was insightful enough to set a countdown timer for your launch the first time, so that it was a fair launch. Even if you needed to restart your blockchain again, why the hell wouldn't you make it a fair launch by telling people you would be re-launching at a set time?
Basically, you saw fit to screw over anyone not online in slack at the time you made this decision?
Edit: for those still reading here, devs have made some announcements that may justify the instant re-launch. Whether they handle it properly remains to be seen, but please read on to that point before making up your mind on this launch
Topic: [ANN] INTENSE COIN - Blockchain backed decentralized VPN - Hybrid PoW - page 338. (Read 235822 times)
August 15, 2017, 09:17:01 PM
August 15, 2017, 09:15:59 PM
From the slack channel earlier today:
Everything is running smoothly now although the stratum difficulty it sky high.
Quote
intense-valiant
this is not how i saw this going at all but i would stop mining now if i were you.
due to the chain issues i am going to reissue a new genesis block and you will need to re-download the miner. unfortunately, i discovered not long ago that some enterprising individuals tried to overtake the base block chain before we opened mining. that issue in conjunction with the bad txn payment issues from pool means a do-over... :disappointed:
i will re-compile all EXE's and reupload now, will take some time. very sorry for the troubles everyone.
this is not how i saw this going at all but i would stop mining now if i were you.
due to the chain issues i am going to reissue a new genesis block and you will need to re-download the miner. unfortunately, i discovered not long ago that some enterprising individuals tried to overtake the base block chain before we opened mining. that issue in conjunction with the bad txn payment issues from pool means a do-over... :disappointed:
i will re-compile all EXE's and reupload now, will take some time. very sorry for the troubles everyone.
Everything is running smoothly now although the stratum difficulty it sky high.
August 15, 2017, 09:04:34 PM
Hello all,
What a wild ride this has been...
If you are a newcomer, you need not read this post.
If you have already downloaded the INT wallet or miner, you will need to unfortunately re-download. My sincere apologies for the troubles.
I have re-uploaded the Windows miner and GUI wallet and am working on compiling and uploading the rest.
After you re-download, you need to delete your data directory -- on Windows, this is %userprofile%\appdata\roaming\intensecoin, on linux and Mac, it's ~/.intensecoin
After you re-open the daemon or miner, you will need to most likely point it to a seed node with the correct blockchain by using this command:
It deleted coins? What a wild ride this has been...
If you are a newcomer, you need not read this post.
If you have already downloaded the INT wallet or miner, you will need to unfortunately re-download. My sincere apologies for the troubles.
I have re-uploaded the Windows miner and GUI wallet and am working on compiling and uploading the rest.
After you re-download, you need to delete your data directory -- on Windows, this is %userprofile%\appdata\roaming\intensecoin, on linux and Mac, it's ~/.intensecoin
After you re-open the daemon or miner, you will need to most likely point it to a seed node with the correct blockchain by using this command:
Code:
./intensecoind --add-exclusive-node 192.124.18.154:48772
August 15, 2017, 08:50:23 PM
Hello all,
What a wild ride this has been...
If you are a newcomer, you need not read this post.
If you have already downloaded the INT wallet or miner, you will need to unfortunately re-download. My sincere apologies for the troubles.
I have re-uploaded the Windows miner and GUI wallet and am working on compiling and uploading the rest.
After you re-download, you need to delete your data directory -- on Windows, this is %userprofile%\appdata\roaming\intensecoin, on linux and Mac, it's ~/.intensecoin
After you re-open the daemon or miner, you will need to most likely point it to a seed node with the correct blockchain by using this command:
What a wild ride this has been...
If you are a newcomer, you need not read this post.
If you have already downloaded the INT wallet or miner, you will need to unfortunately re-download. My sincere apologies for the troubles.
I have re-uploaded the Windows miner and GUI wallet and am working on compiling and uploading the rest.
After you re-download, you need to delete your data directory -- on Windows, this is %userprofile%\appdata\roaming\intensecoin, on linux and Mac, it's ~/.intensecoin
After you re-open the daemon or miner, you will need to most likely point it to a seed node with the correct blockchain by using this command:
Code:
./intensecoind --add-exclusive-node 192.124.18.154:48772
After that
03:49:21.216228 INFO [5.164.27.158:10211 INC] Sync data returned unknown top block: 365 -> 569 [204 blocks (0 days) behind]
August 15, 2017, 07:23:33 PM
i try connect but pool not working , i can't mining this pool
do you have any pool other ?
do you have any pool other ?
August 15, 2017, 07:15:37 PM
Dev,
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
I have the same issue with the same TX D8753202AA0A6FE4AA64D3BD8A0B506F37001C406104F4FE2E5032049640DD2E
Amount: 1,344.00 INTNS
Me too
I have the same issue with the same TX D8753202AA0A6FE4AA64D3BD8A0B506F37001C406104F4FE2E5032049640DD2E
Amount: 9,347.00 INTNS
August 15, 2017, 07:04:51 PM
Hello all,
What a wild ride this has been...
If you are a newcomer, you need not read this post.
If you have already downloaded the INT wallet or miner, you will need to unfortunately re-download. My sincere apologies for the troubles.
I have re-uploaded the Windows miner and GUI wallet and am working on compiling and uploading the rest.
After you re-download, you need to delete your data directory -- on Windows, this is %userprofile%\appdata\roaming\intensecoin, on linux and Mac, it's ~/.intensecoin
After you re-open the daemon or miner, you will need to most likely point it to a seed node with the correct blockchain by using this command:
What a wild ride this has been...
If you are a newcomer, you need not read this post.
If you have already downloaded the INT wallet or miner, you will need to unfortunately re-download. My sincere apologies for the troubles.
I have re-uploaded the Windows miner and GUI wallet and am working on compiling and uploading the rest.
After you re-download, you need to delete your data directory -- on Windows, this is %userprofile%\appdata\roaming\intensecoin, on linux and Mac, it's ~/.intensecoin
After you re-open the daemon or miner, you will need to most likely point it to a seed node with the correct blockchain by using this command:
Code:
./intensecoind --add-exclusive-node 192.124.18.154:48772
August 15, 2017, 05:11:25 PM
what is the problem with blockchain? last block created 1 hour ago. is it belongs to pool or blockchain?
edit : from slack
this is not how i saw this going at all but i would stop mining now if i were you.
due to the chain issues i am going to reissue a new genesis block and you will need to re-download the miner. unfortunately, i discovered not long ago that some enterprising individuals tried to overtake the base block chain before we opened mining. that issue in conjunction with the bad txn payment issues from pool means a do-over... :disappointed:
i will re-compile all EXE's and reupload now, will take some time. very sorry for the troubles everyone.
edit : from slack
this is not how i saw this going at all but i would stop mining now if i were you.
due to the chain issues i am going to reissue a new genesis block and you will need to re-download the miner. unfortunately, i discovered not long ago that some enterprising individuals tried to overtake the base block chain before we opened mining. that issue in conjunction with the bad txn payment issues from pool means a do-over... :disappointed:
i will re-compile all EXE's and reupload now, will take some time. very sorry for the troubles everyone.
August 15, 2017, 04:57:42 PM
Zotac 1080 AMP extreme.. giving 412 H/s only.. Why is that ? too low i think
I am using 7777 block..
Use 5555I am using 7777 block..
Miners, Please use port 5555 or 7777. With port 3333 we are flooding pool with low dif shares.
Which one to use 5555 or 7777 ? How to know ?
Unless you have large mining farm, then use 7777For 6 x RX 480 for example how much is better ?
August 15, 2017, 04:48:04 PM
Our Pool
Hash Rate: 763.00 KH/sec
Block Found: about an hour ago
Connected Miners: 161
Total Pool Fee: 0%
Block Found Every: 35 seconds (est.)
Crap coin, crap pool.
dont have 1 day and have many problems...
you guys dont earn nothing because blockchain go down, no one is fiding any block.
Hash Rate: 763.00 KH/sec
Block Found: about an hour ago
Connected Miners: 161
Total Pool Fee: 0%
Block Found Every: 35 seconds (est.)
Crap coin, crap pool.
dont have 1 day and have many problems...
you guys dont earn nothing because blockchain go down, no one is fiding any block.
August 15, 2017, 04:43:13 PM
Hey dev pool problem? blok not catch
August 15, 2017, 04:33:49 PM
Dev,
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
I have the same issue with the same TX D8753202AA0A6FE4AA64D3BD8A0B506F37001C406104F4FE2E5032049640DD2E
Amount: 1,344.00 INTNS
Same here:
15/8/2017, 18:08:27 f4cf3b44dcc196ef755ba604b3cc9abb10bba45343de4c3411eb26072c60252a 3000.0000
August 15, 2017, 04:28:16 PM
I have been mining for about 5 hours with 3kh and i only got 800 coins... something is wrong with payments on pool side?
August 15, 2017, 04:24:13 PM
Zotac 1080 AMP extreme.. giving 412 H/s only.. Why is that ? too low i think
I am using 7777 block..
I am using 7777 block..
My 1080 underclocked does about 435 H/s, cryptonight algo is not very GPU friendly. Haswell i7 does about 140 H/s.
On 'brighter' note, wondering if pool is stuck again, or it's just difficuly ramped up...
August 15, 2017, 04:20:22 PM
Pool down again, everytime this shit pool will down ? serious this ?
August 15, 2017, 04:18:06 PM
Zotac 1080 AMP extreme.. giving 412 H/s only.. Why is that ? too low i think
I am using 7777 block..
I am using 7777 block..
August 15, 2017, 04:14:02 PM
I did go ahead and update the difficulty configuration for the ports per your recommendations, thanks! I want to hold off on restarting the pool, though, which is required to load the new configuration, as every time I restart it people get very excited here.
It's OK for now, thanx, bro
If you wanna the UI side to be updated, this could be done later, when people go less excited (the network difficulty I mean ) August 15, 2017, 03:01:55 PM
Dev,
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
I have the same issue with the same TX D8753202AA0A6FE4AA64D3BD8A0B506F37001C406104F4FE2E5032049640DD2E
Amount: 1,344.00 INTNS
August 15, 2017, 02:42:21 PM
Dev,
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
Would you please check this tx d8753202aa0a6fe4aa64d3bd8a0b506f37001c406104f4fe2e5032049640dd2e
The coins refuse to confirm
On my wallet it has no transaction time, only amount...
Thanks.
August 15, 2017, 02:40:34 PM
Devs, just set ports diff to:
low - 2000
med - 10000
high - ...
And we won't be ddosing the pool.
low - 2000
med - 10000
high - ...
And we won't be ddosing the pool.
I did go ahead and update the difficulty configuration for the ports per your recommendations, thanks! I want to hold off on restarting the pool, though, which is required to load the new configuration, as every time I restart it people get very excited here.
Pool is down again...Damn people, just do not use port 3333 at all for smooth mining please!
Pool was down because I took it down. It was stalled due to some bad txns in the blockchain. Pool isn't being DDoS'd yet
I encourage everyone to join our Slack channel (link in first post) where you will get much more up-to-date information than here
The blockchain encountered some bad transactions in the 396 block. I restarted the seed nodes and resync'd the daemons and now blocks are being found once again.
Apologies for the troubles, I know this is frustrating for all of you. Please know I share your frustration. Lol.
No matter what I do, I cannot get any shares? What could be the issue?
WOW! How do you get 5.7 kH/s for gtx 1060? what miner you use?
See above, pool was temporarily not finding blocks due to some rogue transactions. I don't believe it was an attack but rather just some sort of error related to me restarting the pool with so many miners sending traffic. Whatever the case, you should be getting shares now, let me know.
I would suggest using the pool front-end to check the balance for your address - also verify it is showing a hash rate etc.
The blockchain encountered some bad transactions in the 396 block. I restarted the seed nodes and resync'd the daemons and now blocks are being found once again.
Apologies for the troubles, I know this is frustrating for all of you. Please know I share your frustration. Lol.
Code:
2017-08-15 13:33:22] 2 miner threads started, using 'cryptonight' algorithm.
[2017-08-15 13:33:22] Starting Stratum on stratum+tcp://45.32.171.89:3333
[2017-08-15 13:33:22] Binding thread 0 to cpu 0
[2017-08-15 13:33:22] Binding thread 1 to cpu 1
[2017-08-15 13:33:23] GPU #1: GeForce GTX 1060 3GB, 1596.10 H/s
[2017-08-15 13:33:23] GPU #0: GeForce GTX 1060 3GB, 1129.99 H/s
[2017-08-15 13:33:35] GPU #0: GeForce GTX 1060 3GB, 5771.00 H/s
[2017-08-15 13:33:39] GPU #1: GeForce GTX 1060 3GB, 5773.24 H/s
[2017-08-15 13:33:56] Pool set diff to 100
[2017-08-15 13:33:56] Stratum detected new block
[2017-08-15 13:33:56] GPU #1: GeForce GTX 1060 3GB, 5780.94 H/s
[2017-08-15 13:33:56] GPU #0: GeForce GTX 1060 3GB, 5797.06 H/s
[2017-08-15 13:34:56] GPU #1: GeForce GTX 1060 3GB, 5740.04 H/s
[2017-08-15 13:34:56] GPU #0: GeForce GTX 1060 3GB, 5748.11 H/s
[2017-08-15 13:35:56] Stratum connection timed out
[2017-08-15 13:35:56] Stratum connection interrupted
[2017-08-15 13:35:56] GPU #1: GeForce GTX 1060 3GB, 5774.43 H/s
[2017-08-15 13:35:56] GPU #0: GeForce GTX 1060 3GB, 5772.95 H/s
[2017-08-15 13:36:22] Stratum detected new block
[2017-08-15 13:36:22] GPU #1: GeForce GTX 1060 3GB, 5754.76 H/s
[2017-08-15 13:36:22] GPU #0: GeForce GTX 1060 3GB, 5775.68 H/s
[2017-08-15 13:37:23] GPU #1: GeForce GTX 1060 3GB, 5726.57 H/s
[2017-08-15 13:37:23] GPU #0: GeForce GTX 1060 3GB, 5731.76 H/s
[2017-08-15 13:33:22] Starting Stratum on stratum+tcp://45.32.171.89:3333
[2017-08-15 13:33:22] Binding thread 0 to cpu 0
[2017-08-15 13:33:22] Binding thread 1 to cpu 1
[2017-08-15 13:33:23] GPU #1: GeForce GTX 1060 3GB, 1596.10 H/s
[2017-08-15 13:33:23] GPU #0: GeForce GTX 1060 3GB, 1129.99 H/s
[2017-08-15 13:33:35] GPU #0: GeForce GTX 1060 3GB, 5771.00 H/s
[2017-08-15 13:33:39] GPU #1: GeForce GTX 1060 3GB, 5773.24 H/s
[2017-08-15 13:33:56] Pool set diff to 100
[2017-08-15 13:33:56] Stratum detected new block
[2017-08-15 13:33:56] GPU #1: GeForce GTX 1060 3GB, 5780.94 H/s
[2017-08-15 13:33:56] GPU #0: GeForce GTX 1060 3GB, 5797.06 H/s
[2017-08-15 13:34:56] GPU #1: GeForce GTX 1060 3GB, 5740.04 H/s
[2017-08-15 13:34:56] GPU #0: GeForce GTX 1060 3GB, 5748.11 H/s
[2017-08-15 13:35:56] Stratum connection timed out
[2017-08-15 13:35:56] Stratum connection interrupted
[2017-08-15 13:35:56] GPU #1: GeForce GTX 1060 3GB, 5774.43 H/s
[2017-08-15 13:35:56] GPU #0: GeForce GTX 1060 3GB, 5772.95 H/s
[2017-08-15 13:36:22] Stratum detected new block
[2017-08-15 13:36:22] GPU #1: GeForce GTX 1060 3GB, 5754.76 H/s
[2017-08-15 13:36:22] GPU #0: GeForce GTX 1060 3GB, 5775.68 H/s
[2017-08-15 13:37:23] GPU #1: GeForce GTX 1060 3GB, 5726.57 H/s
[2017-08-15 13:37:23] GPU #0: GeForce GTX 1060 3GB, 5731.76 H/s
No matter what I do, I cannot get any shares? What could be the issue?
See above, pool was temporarily not finding blocks due to some rogue transactions. I don't believe it was an attack but rather just some sort of error related to me restarting the pool with so many miners sending traffic. Whatever the case, you should be getting shares now, let me know.
I've been mining for 40 minutes and I haven't seen any coins, yet the pool says I'm submitting.
I would suggest using the pool front-end to check the balance for your address - also verify it is showing a hash rate etc.
Still no shares
I'm sorry, I really don't know what to tell you other than to try a different miner. There aren't many GPU miners that work on cryptonight. I can only endorse the one built into the tool, and cpuminer-multi by tpruvot as I know both work. It looks like you're trying CCminer - I think ccminer has issues with cryptonight.
Jump to: