[ANN]❁ KORE Tor Masternodes, Browser, VoIP, Aether OS, KOREPhone, KOREbay Funded - page 85.

Milarepa0907

newbie

Activity: 150

Merit: 0

Greetings MikeMike! If you dont mind I have a question to you as a developer of Kore. What is the main advanages of Kore compared to so many competitors in privacy space ( Momero, Verge, Zcash, Zcoin, ZenCash, Pivx, Nav Coin, CloakCoin etc) Will be much appreciate for clarification.

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

The main source is uploaded to the KSU1 GIT for Linux testing.
It is uploaded as a 7z file

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

Testers:
New version of Windows!
Looks like the forced reindexing may be fixed.
Need to see if the disappearing coins is fixed too so please test it out ASAP.
They are on the GIT

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

It is time to start up the voting again to get KORE Listed on CCEX.
If you have a ccex account cast a free vote.
If you dont have an account, create one...if you can.

VOTE:

You can send BTC/Votes to this CCEX Address:
1J9bpv6dsJrMmVbUye3ijp4K5YCWPTxJCK

I will meet 50% whatever BTC votes are cast.
If you cast .2BTC towards KORE votes.
I will donate .1BTC towards KORE votes.

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

Quote from: ShamanicHarmonics on December 30, 2017, 07:39:38 AM

Quote from: MikeMike on December 29, 2017, 10:34:01 PM

For those helping to test the Windows 32 and 64 bit wallets
a new version is on the GIT.

MikeMike

Where's the Github with the active dev in it? In the OP it links to this page, but it hasn't been updated in 3 months (so I must be in the wrong place)
https://github.com/Kore-Core/kore

We are using private gits till the release.

ShamanicHarmonics

newbie

Activity: 21

Merit: 0

Quote from: MikeMike on December 29, 2017, 10:34:01 PM

For those helping to test the Windows 32 and 64 bit wallets
a new version is on the GIT.

MikeMike

Where's the Github with the active dev in it? In the OP it links to this page, but it hasn't been updated in 3 months (so I must be in the wrong place)
https://github.com/Kore-Core/kore

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

For those helping to test the Windows 32 and 64 bit wallets
a new version is on the GIT.

MikeMike

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

Quote from: reffi on December 29, 2017, 08:50:08 AM

wow internet coins finally starting to rise!! NEOS and SHIFT going crazy! Hope KORE can join the momentum soon with good news! Now is the time!!!!!!!!!!

KORE has its own pattern of price movements.
To try to compare it to others or expect it to behave like others is futile.

reffi

hero member

Activity: 770

Merit: 500

wow internet coins finally starting to rise!! NEOS and SHIFT going crazy! Hope KORE can join the momentum soon with good news! Now is the time!!!!!!!!!!

Mxrider420z

sr. member

Activity: 620

Merit: 289

Ⓚ KORE TEAM Ⓚ ★ Portuguese/SPA

Quote from: ?? on ??

Quote from: MikeMike on December 28, 2017, 08:29:24 AM

Quote from: darkthan on December 27, 2017, 10:30:59 PM

i hope that kore team has enjoyed christmas and prepared news for 2018 !!!

Judging by the way 2017 closed out,.. 208 is going to be one heck of a year for KORE!
Wink

2018 should be a life changing year.

Hey guys how you doing?

Ohh yeah 2018 will be a great year for Kore and good cryptos

Go Kore, Go BTC

jbjb1234

member

Activity: 98

Merit: 10

What’s the word... ah yes, hodl. Fingers crossed for a good dev update in the new year.

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

Quote from: darkthan on December 27, 2017, 10:30:59 PM

i hope that kore team has enjoyed christmas and prepared news for 2018 !!!

Judging by the way 2017 closed out,.. 208 is going to be one heck of a year for KORE!
Wink

darkthan

newbie

Activity: 42

Merit: 0

i hope that kore team has enjoyed christmas and prepared news for 2018 !!!

CryptoNick

legendary

Activity: 987

Merit: 1003

Quote from: p4nt3on on December 26, 2017, 07:42:52 AM

Quote from: CryptoNick on December 25, 2017, 04:51:39 AM

Quote from: p4nt3on on December 24, 2017, 06:44:54 AM

Quote from: CryptoNick on December 24, 2017, 01:30:28 AM

Quote from: p4nt3on on December 23, 2017, 08:29:29 PM

Hi,

I'm following this forum for several months and with the help of bitcointalk I set up a lot different masternodes. Now that I wanted to setup a KORE mn I encountered a problem that eventually forced me to create an account and post my question. :-)

Can KORE mns be run as a hot wallet setup? I want to leave the collateral in the wallet on the VPS and I tried almost all flags within the configs but:
a) it seems as if the KORE mn does not parse the masternode.conf correctly as 'masternode list-conf' results in an empty array {}
b) debug.log says: CActiveMasternode::ManageStatus() - not capable: Could not connect to .onion:10743

See my kore.config below.

I would really appreciate any advice.

Best
p4nt3on

Code:

################################
# basic settings
################################
txindex=1
logtimestamps=1
server=1
listen=1
daemon=1
gen=0
maxconnections=256
staking=0
#externalip=...
#port=10743
#bind=...:10743

################################
# masternode specific settings
################################
masternode=1
masternodeprivkey=...
masternodeaddr=...:10743

#############################
# optional indices
#############################
addressindex=1
timestampindex=1
spentindex=1

#############################
# JSONRPC
#############################
rpcuser=...
rpcpassword=...
rpcallowip=127.0.0.1
rpcport=9932

#############################
# Direct Peer Nodes
#############################
addnode=fzmjhi7xbapufts6.onion
addnode=p6sfbaw762mcqyxg.onion
addnode=b5gacg24h6licg5m.onion
addnode=skrivht2uj3yjluv.onion
addnode=yylyof6avhsmb327.onion
addnode=mpkl5osmeqbc3ekk.onion
addnode=a3pnebzu45dlled2.onion
addnode=6ric6c7mi7ahz2vp.onion
addnode=zidlcde3vmowux3u.onion
addnode=uei3hz5jstv7tfo6.onion
addnode=2id37bekzaqqjcos.onion
addnode=n2yrtxzafo57hzie.onion
addnode=iurptsejm4sjrbpi.onion
addnode=vyohgk7zesm3zl2w.onion
addnode=qaj5jpgvcrrlnwlh.onion
addnode=gvb63xigsmkowrbh.onion
addnode=5dbshryxx7lo2cl5.onion
addnode=7hemavllpt4ratxe.onion
addnode=kjcvxfytfbzvqely.onion
addnode=db24lr474vczwz5a.onion

Have you edited the Masternode.conf file? What you posted is your Kore.conf file. There is a guide on Kore.Life that shows how to set up the VPS and Local Wallet. So I would assume you take the Local wallet settings and use them in your Remote VPS Masternode.conf file there but don't use a local onion. If the RAW TX Data is not being broadcast on the network you will get that error. So you would need to use the same onion address as the Masternode instead of a Local Onion address and send the coin from the MN and to the MN and then copy the RAW TX data from the VPS screen.

That entire step has to be done or you will get that - not capable: error

Hi CryptoNick,

thank you for your fast response. Of course I updated the masternode.conf file. I also followed the guide on kore.life but it doesn't cover hot wallet setups - it's more a guide for a cold wallet setup...

I used the same onion address (from ~/.kore/onion/hostname) in the following config directives:
- masternode.conf: (mn0 .onion:10743 )
- kore.conf - masternodeaddr=.onion:10743
- kore.conf - bind=.onion:10743
- kore.conf - externalip=.onion

But it shows up the same error over and over again. I actually sent the collateral transaction from one MN wallet address to another and used the txid/txvout in the masternode.conf file, so I'm not sure what could be wrong.

Try this:
masternode start -all

I think you just need to initialize the masternode since there is no GUI it was a step that is missing from the local wallet. Loading the Config doesn't start the Masternode.

Then to clear your passphrase from the history use this:
cat /dev/null > ~/.bash_history && history -c && exit
or just edit the .bash_history file to get rid of your passphrase entries.

I tried it this way, but it didn't work - same error message. Actually the command "masternode start-alias mn0" would do the same as the one you mentioned.
"masternode list-conf" should return the config of the MN if parsed correctly from masternode.conf, but it results in an empty array, so from my perspective the parsing step fails.

Probably because the masternode command is not available in the daemon only the CLI. They work separately.

p4nt3on

newbie

Activity: 3

Merit: 0

Quote from: CryptoNick on December 25, 2017, 04:51:39 AM

Quote from: p4nt3on on December 24, 2017, 06:44:54 AM

Quote from: CryptoNick on December 24, 2017, 01:30:28 AM

Quote from: p4nt3on on December 23, 2017, 08:29:29 PM

Hi,

I'm following this forum for several months and with the help of bitcointalk I set up a lot different masternodes. Now that I wanted to setup a KORE mn I encountered a problem that eventually forced me to create an account and post my question. :-)

Can KORE mns be run as a hot wallet setup? I want to leave the collateral in the wallet on the VPS and I tried almost all flags within the configs but:
a) it seems as if the KORE mn does not parse the masternode.conf correctly as 'masternode list-conf' results in an empty array {}
b) debug.log says: CActiveMasternode::ManageStatus() - not capable: Could not connect to .onion:10743

See my kore.config below.

I would really appreciate any advice.

Best
p4nt3on

Code:

################################
# basic settings
################################
txindex=1
logtimestamps=1
server=1
listen=1
daemon=1
gen=0
maxconnections=256
staking=0
#externalip=...
#port=10743
#bind=...:10743

################################
# masternode specific settings
################################
masternode=1
masternodeprivkey=...
masternodeaddr=...:10743

#############################
# optional indices
#############################
addressindex=1
timestampindex=1
spentindex=1

#############################
# JSONRPC
#############################
rpcuser=...
rpcpassword=...
rpcallowip=127.0.0.1
rpcport=9932

#############################
# Direct Peer Nodes
#############################
addnode=fzmjhi7xbapufts6.onion
addnode=p6sfbaw762mcqyxg.onion
addnode=b5gacg24h6licg5m.onion
addnode=skrivht2uj3yjluv.onion
addnode=yylyof6avhsmb327.onion
addnode=mpkl5osmeqbc3ekk.onion
addnode=a3pnebzu45dlled2.onion
addnode=6ric6c7mi7ahz2vp.onion
addnode=zidlcde3vmowux3u.onion
addnode=uei3hz5jstv7tfo6.onion
addnode=2id37bekzaqqjcos.onion
addnode=n2yrtxzafo57hzie.onion
addnode=iurptsejm4sjrbpi.onion
addnode=vyohgk7zesm3zl2w.onion
addnode=qaj5jpgvcrrlnwlh.onion
addnode=gvb63xigsmkowrbh.onion
addnode=5dbshryxx7lo2cl5.onion
addnode=7hemavllpt4ratxe.onion
addnode=kjcvxfytfbzvqely.onion
addnode=db24lr474vczwz5a.onion

Have you edited the Masternode.conf file? What you posted is your Kore.conf file. There is a guide on Kore.Life that shows how to set up the VPS and Local Wallet. So I would assume you take the Local wallet settings and use them in your Remote VPS Masternode.conf file there but don't use a local onion. If the RAW TX Data is not being broadcast on the network you will get that error. So you would need to use the same onion address as the Masternode instead of a Local Onion address and send the coin from the MN and to the MN and then copy the RAW TX data from the VPS screen.

That entire step has to be done or you will get that - not capable: error

Hi CryptoNick,

thank you for your fast response. Of course I updated the masternode.conf file. I also followed the guide on kore.life but it doesn't cover hot wallet setups - it's more a guide for a cold wallet setup...

I used the same onion address (from ~/.kore/onion/hostname) in the following config directives:
- masternode.conf: (mn0 .onion:10743 )
- kore.conf - masternodeaddr=.onion:10743
- kore.conf - bind=.onion:10743
- kore.conf - externalip=.onion

But it shows up the same error over and over again. I actually sent the collateral transaction from one MN wallet address to another and used the txid/txvout in the masternode.conf file, so I'm not sure what could be wrong.

Try this:
masternode start -all

I think you just need to initialize the masternode since there is no GUI it was a step that is missing from the local wallet. Loading the Config doesn't start the Masternode.

Then to clear your passphrase from the history use this:
cat /dev/null > ~/.bash_history && history -c && exit
or just edit the .bash_history file to get rid of your passphrase entries.

I tried it this way, but it didn't work - same error message. Actually the command "masternode start-alias mn0" would do the same as the one you mentioned.
"masternode list-conf" should return the config of the MN if parsed correctly from masternode.conf, but it results in an empty array, so from my perspective the parsing step fails.

CryptoNick

legendary

Activity: 987

Merit: 1003

Quote from: p4nt3on on December 24, 2017, 06:44:54 AM

Quote from: CryptoNick on December 24, 2017, 01:30:28 AM

Quote from: p4nt3on on December 23, 2017, 08:29:29 PM

Hi,

I'm following this forum for several months and with the help of bitcointalk I set up a lot different masternodes. Now that I wanted to setup a KORE mn I encountered a problem that eventually forced me to create an account and post my question. :-)

Can KORE mns be run as a hot wallet setup? I want to leave the collateral in the wallet on the VPS and I tried almost all flags within the configs but:
a) it seems as if the KORE mn does not parse the masternode.conf correctly as 'masternode list-conf' results in an empty array {}
b) debug.log says: CActiveMasternode::ManageStatus() - not capable: Could not connect to .onion:10743

See my kore.config below.

I would really appreciate any advice.

Best
p4nt3on

Code:

################################
# basic settings
################################
txindex=1
logtimestamps=1
server=1
listen=1
daemon=1
gen=0
maxconnections=256
staking=0
#externalip=...
#port=10743
#bind=...:10743

################################
# masternode specific settings
################################
masternode=1
masternodeprivkey=...
masternodeaddr=...:10743

#############################
# optional indices
#############################
addressindex=1
timestampindex=1
spentindex=1

#############################
# JSONRPC
#############################
rpcuser=...
rpcpassword=...
rpcallowip=127.0.0.1
rpcport=9932

#############################
# Direct Peer Nodes
#############################
addnode=fzmjhi7xbapufts6.onion
addnode=p6sfbaw762mcqyxg.onion
addnode=b5gacg24h6licg5m.onion
addnode=skrivht2uj3yjluv.onion
addnode=yylyof6avhsmb327.onion
addnode=mpkl5osmeqbc3ekk.onion
addnode=a3pnebzu45dlled2.onion
addnode=6ric6c7mi7ahz2vp.onion
addnode=zidlcde3vmowux3u.onion
addnode=uei3hz5jstv7tfo6.onion
addnode=2id37bekzaqqjcos.onion
addnode=n2yrtxzafo57hzie.onion
addnode=iurptsejm4sjrbpi.onion
addnode=vyohgk7zesm3zl2w.onion
addnode=qaj5jpgvcrrlnwlh.onion
addnode=gvb63xigsmkowrbh.onion
addnode=5dbshryxx7lo2cl5.onion
addnode=7hemavllpt4ratxe.onion
addnode=kjcvxfytfbzvqely.onion
addnode=db24lr474vczwz5a.onion

Have you edited the Masternode.conf file? What you posted is your Kore.conf file. There is a guide on Kore.Life that shows how to set up the VPS and Local Wallet. So I would assume you take the Local wallet settings and use them in your Remote VPS Masternode.conf file there but don't use a local onion. If the RAW TX Data is not being broadcast on the network you will get that error. So you would need to use the same onion address as the Masternode instead of a Local Onion address and send the coin from the MN and to the MN and then copy the RAW TX data from the VPS screen.

That entire step has to be done or you will get that - not capable: error

Hi CryptoNick,

thank you for your fast response. Of course I updated the masternode.conf file. I also followed the guide on kore.life but it doesn't cover hot wallet setups - it's more a guide for a cold wallet setup...

I used the same onion address (from ~/.kore/onion/hostname) in the following config directives:
- masternode.conf: (mn0 .onion:10743 )
- kore.conf - masternodeaddr=.onion:10743
- kore.conf - bind=.onion:10743
- kore.conf - externalip=.onion

But it shows up the same error over and over again. I actually sent the collateral transaction from one MN wallet address to another and used the txid/txvout in the masternode.conf file, so I'm not sure what could be wrong.

Try this:
masternode start -all

I think you just need to initialize the masternode since there is no GUI it was a step that is missing from the local wallet. Loading the Config doesn't start the Masternode.

Then to clear your passphrase from the history use this:
cat /dev/null > ~/.bash_history && history -c && exit
or just edit the .bash_history file to get rid of your passphrase entries.

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

Quote from: 2bfree on December 24, 2017, 11:52:50 PM

can someone give me a short pitch why this is better then any other coin out there and what does Kore mean???

Read the complete OP page.
Then read it again.
https://bitcointalksearch.org/topic/m.20949347

MikeMike

2bfree

sr. member

Activity: 686

Merit: 251

I'm investigating Crypto Projects

can someone give me a short pitch why this is better then any other coin out there and what does Kore mean???

Mxrider420z

sr. member

Activity: 620

Merit: 289

Ⓚ KORE TEAM Ⓚ ★ Portuguese/SPA

Hello guys how you doing?,

If you use Teamviewer please update it to the latest version as there is a vulnerability that can give unathorized remote access

https://blog.malwarebytes.com/cybercrime/2017/12/use-teamviewer-fix-this-dangerous-permissions-bug-with-an-update/

If you can live without teamviewer thats the best option as they are NSA/CIA partner all indicates.

Wanna take the time to wish a merry christmas and happy new year to all.

The team is hard working and will continue working through the holidays.

Cheers,

Mx

TheMatrix101

full member

Activity: 330

Merit: 130

Ⓚ Kore Application Developer Ⓚ

Quote from: p4nt3on on December 24, 2017, 06:44:54 AM

Quote from: CryptoNick on December 24, 2017, 01:30:28 AM

Quote from: p4nt3on on December 23, 2017, 08:29:29 PM

Hi,

I'm following this forum for several months and with the help of bitcointalk I set up a lot different masternodes. Now that I wanted to setup a KORE mn I encountered a problem that eventually forced me to create an account and post my question. :-)

Can KORE mns be run as a hot wallet setup? I want to leave the collateral in the wallet on the VPS and I tried almost all flags within the configs but:
a) it seems as if the KORE mn does not parse the masternode.conf correctly as 'masternode list-conf' results in an empty array {}
b) debug.log says: CActiveMasternode::ManageStatus() - not capable: Could not connect to .onion:10743

See my kore.config below.

I would really appreciate any advice.

Best
p4nt3on

Code:

################################
# basic settings
################################
txindex=1
logtimestamps=1
server=1
listen=1
daemon=1
gen=0
maxconnections=256
staking=0
#externalip=...
#port=10743
#bind=...:10743

################################
# masternode specific settings
################################
masternode=1
masternodeprivkey=...
masternodeaddr=...:10743

#############################
# optional indices
#############################
addressindex=1
timestampindex=1
spentindex=1

#############################
# JSONRPC
#############################
rpcuser=...
rpcpassword=...
rpcallowip=127.0.0.1
rpcport=9932

#############################
# Direct Peer Nodes
#############################
addnode=fzmjhi7xbapufts6.onion
addnode=p6sfbaw762mcqyxg.onion
addnode=b5gacg24h6licg5m.onion
addnode=skrivht2uj3yjluv.onion
addnode=yylyof6avhsmb327.onion
addnode=mpkl5osmeqbc3ekk.onion
addnode=a3pnebzu45dlled2.onion
addnode=6ric6c7mi7ahz2vp.onion
addnode=zidlcde3vmowux3u.onion
addnode=uei3hz5jstv7tfo6.onion
addnode=2id37bekzaqqjcos.onion
addnode=n2yrtxzafo57hzie.onion
addnode=iurptsejm4sjrbpi.onion
addnode=vyohgk7zesm3zl2w.onion
addnode=qaj5jpgvcrrlnwlh.onion
addnode=gvb63xigsmkowrbh.onion
addnode=5dbshryxx7lo2cl5.onion
addnode=7hemavllpt4ratxe.onion
addnode=kjcvxfytfbzvqely.onion
addnode=db24lr474vczwz5a.onion

Have you edited the Masternode.conf file? What you posted is your Kore.conf file. There is a guide on Kore.Life that shows how to set up the VPS and Local Wallet. So I would assume you take the Local wallet settings and use them in your Remote VPS Masternode.conf file there but don't use a local onion. If the RAW TX Data is not being broadcast on the network you will get that error. So you would need to use the same onion address as the Masternode instead of a Local Onion address and send the coin from the MN and to the MN and then copy the RAW TX data from the VPS screen.

That entire step has to be done or you will get that - not capable: error

Hi CryptoNick,

thank you for your fast response. Of course I updated the masternode.conf file. I also followed the guide on kore.life but it doesn't cover hot wallet setups - it's more a guide for a cold wallet setup...

I used the same onion address (from ~/.kore/onion/hostname) in the following config directives:
- masternode.conf: (mn0 .onion:10743 )
- kore.conf - masternodeaddr=.onion:10743
- kore.conf - bind=.onion:10743
- kore.conf - externalip=.onion

But it shows up the same error over and over again. I actually sent the collateral transaction from one MN wallet address to another and used the txid/txvout in the masternode.conf file, so I'm not sure what could be wrong.

KORE MNs are meant to be hot/cold that is why the walkthrough is for that. I believe there is a way to do a hot setup a little wonky like but I don't know it/wouldn't advise you do it that way

an alternative?
Maybe do the hot/cold then ftp your local wallet.dat to your server so you dont have to worry about it?

Hope I helped
Matrix

Topic: [ANN]❁ KORE Tor Masternodes, Browser, VoIP, Aether OS, KOREPhone, KOREbay Funded - page 85. (Read 152390 times)