Topic: [ANN] Kryptohash | Brand new PoW algo | 320bit hash | ed25519 | PID algo for dif - page 69. (Read 149454 times)
December 03, 2014, 10:09:49 AM
WTB 100,000 , any offers ?
December 03, 2014, 10:08:42 AM
Edit the kryptohash.conf file and ensure the following parameters are uncommented:
- server=1
- rpcuser={RPC_username}
- rpcpassword={RPC_password}
- rpcport=38912
- rpcconnect=127.0.0.1
Ah! I'm so confused! I DO NOT HAVE A KRYPTOHASH.CONF ANYWHERE AFTER **FIRST** INSTALL. This conf is for the cgminer-khc, correct? Or is it for the wallet?
Do I need to make one? Where do I put it? Where should it be if I already have it?
Right now I have a PiMP/cgminer-khc pointed here: /opt/ifmi/cgminer.khc.conf
Quote from: Beginning of cgminer.khc.conf
{
"pools": [
{
"url": "http://127.0.0.1:38912",
"user": "truckfarmer",
"pass": "x",
"profile": "khc"
}
],
"profiles": [
{
"name": "khc",
"algorithm": "kryptohash",
"pools": [
{
"url": "http://127.0.0.1:38912",
"user": "truckfarmer",
"pass": "x",
"profile": "khc"
}
],
"profiles": [
{
"name": "khc",
"algorithm": "kryptohash",
Yes you have to make your config file and place it in the KryptoHash appdata folder.
December 03, 2014, 10:07:15 AM
Edit the kryptohash.conf file and ensure the following parameters are uncommented:
- server=1
- rpcuser={RPC_username}
- rpcpassword={RPC_password}
- rpcport=38912
- rpcconnect=127.0.0.1
Ah! I'm so confused! I DO NOT HAVE A KRYPTOHASH.CONF ANYWHERE AFTER **FIRST** INSTALL. This conf is for the cgminer-khc, correct? Or is it for the wallet?
Do I need to make one? Where do I put it? Where should it be if I already have it?
Right now I have a PiMP/cgminer-khc pointed to a conf I made here: /opt/ifmi/cgminer.khc.conf
Quote from: Beginning of cgminer.khc.conf
{
"pools": [
{
"url": "http://127.0.0.1:38912",
"user": "truckfarmer",
"pass": "x",
"profile": "khc"
}
],
"profiles": [
{
"name": "khc",
"algorithm": "kryptohash",
"pools": [
{
"url": "http://127.0.0.1:38912",
"user": "truckfarmer",
"pass": "x",
"profile": "khc"
}
],
"profiles": [
{
"name": "khc",
"algorithm": "kryptohash",
December 03, 2014, 10:02:47 AM
cgminer still pool 0 slow/down?
I saw that error on cgminer when it could not rpc to kryptohashd. Check that RPC is enabled on kryptohashd (server=1) and that cgminer is reaching it on the correct port (default is 38912).
December 03, 2014, 10:02:32 AM
wallet crash on windows and Linux once i hit setgenerate true 
Don't use the setgenerate option. It won't work.
Mining using KSHAKE320 algo is waaaay too slow for CPUs. The option is there only because Kryptohash code is based on Bitcoin 0.9.3. It is in my ToDo list to clean up the code once we all believe we have a stable code base.
GPU mining is the way to go. If you have a decent video card (AMD preferably), you need to use cgminer-khc to mine KHCs.
December 03, 2014, 09:59:24 AM
@ wr104
Can you tell me how I can find out to determine my threads per core? I tried to google but can't find the correct answer.
I might have got lucky on my 280x. It is up and running at 135 kh/s and finding blocks decently but I can't get my 270x going. I keep getting HW errors. From what I can determine I have 1280 shaders on the 270x.
Can you tell me how I can find out to determine my threads per core? I tried to google but can't find the correct answer.
I might have got lucky on my 280x. It is up and running at 135 kh/s and finding blocks decently but I can't get my 270x going. I keep getting HW errors. From what I can determine I have 1280 shaders on the 270x.
December 03, 2014, 09:53:53 AM
Compiling the wallet on OS X & Linux, at ./configure I get an error:
Quote
checking whether byte ordering is bigendian... yes
configure: error: "Big Endian not supported"
configure: error: "Big Endian not supported"
antonio, can you post your kryptohash.conf for the 280x please?! thank you!!!
*Disclaimer*
My config file is not the safest way to solo mine. I solo mine from 3 computers into the same wallet.
Use this setup at your own risk. I would recommend to use the config in the OP.
rpcuser=YOURUSERNAMEHERE
rpcpassword=YOURPASSWORDHERE
rpcallowip=*
rpcport=38912
listen=1
daemon=1
server=1
December 03, 2014, 09:46:42 AM
why cgminer still pool 0 slow/down?
That's what i'm getting still...
same here...
Go to the Debug console and type: getwork
What do you get?

{
"data" : "010000000000000045169a200616cc763b3f9de957df29b906201a6ac585d6d0aa8fff11b62f05a 6a831b9f039000000a83b541f198ccc1a07e72c5619b1e8fa7473451ef4a120884f73c327086388 ca916fd37797896a172541480f4a010000000000000000000000000000ffff0026b640000000000 0000000000000000000",
"target" : "0000000000000000000000000000000000000000000000000000000000000000000000ffff00000 0"
}
Ok, now do the same but, with the kryptohash-cli.exe that is included in the daemon folder
From the Command Prompt type: kryptohash-cli getwork

kryptohash-cli.exe its close it self after i click it
Don't click on it. Open the Command Prompt, navigate to the folder where kryptohash-cli.exe is located and type:
kryptohash-cli getinfo
kryptohash-cli getwork
December 03, 2014, 09:45:53 AM
Compiling the wallet on OS X & Linux, at ./configure I get an error:
Quote
checking whether byte ordering is bigendian... yes
configure: error: "Big Endian not supported"
configure: error: "Big Endian not supported"
antonio, can you post your kryptohash.conf for the 280x please?! thank you!!!
December 03, 2014, 08:03:59 AM
Up and running finally on 280x and finding blocks.
Now just gotta get 750ti and 970 going (also 270x, having issues now).
December 03, 2014, 07:51:09 AM
wallet crash on windows and Linux once i hit setgenerate true
December 03, 2014, 07:41:03 AM
cgminer still pool 0 slow/down?
December 03, 2014, 06:45:46 AM
why cgminer still pool 0 slow/down?
That's what i'm getting still...
same here...
Go to the Debug console and type: getwork
What do you get?

{
"data" : "010000000000000045169a200616cc763b3f9de957df29b906201a6ac585d6d0aa8fff11b62f05a 6a831b9f039000000a83b541f198ccc1a07e72c5619b1e8fa7473451ef4a120884f73c327086388 ca916fd37797896a172541480f4a010000000000000000000000000000ffff0026b640000000000 0000000000000000000",
"target" : "0000000000000000000000000000000000000000000000000000000000000000000000ffff00000 0"
}
Ok, now do the same but, with the kryptohash-cli.exe that is included in the daemon folder
From the Command Prompt type: kryptohash-cli getwork

kryptohash-cli.exe its close it self after i click it
December 03, 2014, 06:37:22 AM
I have update my Block Explorer with Richlist for Kryptohash. I update the Explorer manual so somtimes the Explorer is not updatet.
December 03, 2014, 06:12:53 AM
December 03, 2014, 04:55:43 AM
why cgminer still pool 0 slow/down?
That's what i'm getting still...
same here...
Go to the Debug console and type: getwork
What do you get?

{
"data" : "010000000000000045169a200616cc763b3f9de957df29b906201a6ac585d6d0aa8fff11b62f05a 6a831b9f039000000a83b541f198ccc1a07e72c5619b1e8fa7473451ef4a120884f73c327086388 ca916fd37797896a172541480f4a010000000000000000000000000000ffff0026b640000000000 0000000000000000000",
"target" : "0000000000000000000000000000000000000000000000000000000000000000000000ffff00000 0"
}
Ok, now do the same but, with the kryptohash-cli.exe that is included in the daemon folder
From the Command Prompt type: kryptohash-cli getwork

kryptohash-cli.exe its close it self after i click it
December 03, 2014, 04:39:59 AM
how much total coin? unlimit?
December 03, 2014, 04:05:35 AM
why cgminer still pool 0 slow/down?
That's what i'm getting still...
same here...
Go to the Debug console and type: getwork
What do you get?

{
"data" : "010000000000000045169a200616cc763b3f9de957df29b906201a6ac585d6d0aa8fff11b62f05a 6a831b9f039000000a83b541f198ccc1a07e72c5619b1e8fa7473451ef4a120884f73c327086388 ca916fd37797896a172541480f4a010000000000000000000000000000ffff0026b640000000000 0000000000000000000",
"target" : "0000000000000000000000000000000000000000000000000000000000000000000000ffff00000 0"
}
Ok, now do the same but, with the kryptohash-cli.exe that is included in the daemon folder
From the Command Prompt type: kryptohash-cli getwork

I did that and first it told me I didn't set a password, which I did, but I realized I needed to move conf file into the roaming folder because it was looking for it there and not where I had the file originally, lol.
But I just tried again and got this message with that command:
error: couldn't connect to server
Edit: If someone has a working kryptohash.conf file can you paste it here, so we can see what it looks like?
December 03, 2014, 03:59:42 AM
Which include is needed for that ?
Code:
keccak/SnP/SnP-FBWL-default.c:17:27: fatal error: SnP-interface.h: File or Directory not found
#include "SnP-interface.h"
CPPFLAGS="-Ikeccak -Ikeccak/SnP -Ikeccak/KeccakF-1600 -I/usr/local/include" LDFLAGS="-L/usr/local/lib -Wl,-rpath=/usr/local/lib" ./configure {extra options like --enable-upnp-default and --with-gui=qt5}
For more details, see: https://github.com/kryptohash/kryptohash/blob/master/doc/build-unix.md
Thx, that worked.
December 03, 2014, 03:57:45 AM
Which include is needed for that ?
Code:
keccak/SnP/SnP-FBWL-default.c:17:27: fatal error: SnP-interface.h: File or Directory not found
#include "SnP-interface.h"
CPPFLAGS="-Ikeccak -Ikeccak/SnP -Ikeccak/KeccakF-1600 -I/usr/local/include" LDFLAGS="-L/usr/local/lib -Wl,-rpath=/usr/local/lib" ./configure {extra options like --enable-upnp-default and --with-gui=qt5}
For more details, see: https://github.com/kryptohash/kryptohash/blob/master/doc/build-unix.md
Jump to: