[ANN] LEASERIG.NET - rent&hire Quark hashing power! - page 23.

djeZo

hero member

Activity: 588

Merit: 520

Quote from: mpdas108 on February 12, 2014, 09:08:10 PM

A strange thing happened earlier with one of my rigs, the moment that the customer rented my rig and LeaseRig tried to change the pool, which it did, cgminer was closed.. I didn't have the "open cgminer when closed outside of cgwatcher" option enabled, so it took me three hours to notice it.. I have since then enable that option so it shouldn't happen again. Do you think it is related to LeaseRig, or just a coincidence that it happened at the time of the rental?

There is no way I could close your cgminer

Must have been the cgminer bug! I have seen quite some of them - cgminer simply crashes!

mpdas108

full member

Activity: 181

Merit: 100

A strange thing happened earlier with one of my rigs, the moment that the customer rented my rig and LeaseRig tried to change the pool, which it did, cgminer was closed.. I didn't have the "open cgminer when closed outside of cgwatcher" option enabled, so it took me three hours to notice it.. I have since then enable that option so it shouldn't happen again. Do you think it is related to LeaseRig, or just a coincidence that it happened at the time of the rental?

djeZo

hero member

Activity: 588

Merit: 520

Quote from: BotwinBG on February 12, 2014, 07:49:36 PM

I had a user asking for PTS - jphsomethingminer. Is it a CPU-only thing? Would adding support for CPU-only coins - make sense/be popular?

If the mining software has cgminer API (is forked off cgminer), then there is already support, just choose Other type of rig

You can verify whether it has cgminer API by firstly trying to configure API (should be something similar to cgminer), then run it via test page.

BotwinBG

sr. member

Activity: 588

Merit: 250

I had a user asking for PTS - jphsomethingminer. Is it a CPU-only thing? Would adding support for CPU-only coins - make sense/be popular?

Yeos

member

Activity: 78

Merit: 10

Quote from: djeZo on February 12, 2014, 05:12:29 PM

Quote from: Yeos on February 12, 2014, 05:09:26 PM

Quote from: lucazane on February 12, 2014, 02:01:41 PM

NEED VERTCOIN RIG !!!!

New VTC rig has been added. Enjoy

Fill some orders! Lets start using this feature!

ok ok!

djeZo

hero member

Activity: 588

Merit: 520

Quote from: Yeos on February 12, 2014, 05:09:26 PM

Quote from: lucazane on February 12, 2014, 02:01:41 PM

NEED VERTCOIN RIG !!!!

New VTC rig has been added. Enjoy

Fill some orders! Lets start using this feature!

Yeos

member

Activity: 78

Merit: 10

Quote from: lucazane on February 12, 2014, 02:01:41 PM

NEED VERTCOIN RIG !!!!

New VTC rig has been added. Enjoy

**New rig special coming tomorrow night.

kenshirothefist

sr. member

Activity: 457

Merit: 273

Quote from: djeZo on February 12, 2014, 03:55:42 PM

- experimental: speed stats, graph is visible, check it out (for now only for past 1 hour)

One very usefull information regarding statistics would be needed: the average speed of the current lease - so that would be average speed from the start of the curent lease up to now (it is useless to have long term average speed because of switching between scrypt/vtc/maxcoin). This way the rentr would be able to see if he really got what is he paying for.

djeZo

hero member

Activity: 588

Merit: 520

Quote from: kenshirothefist on February 12, 2014, 05:02:14 PM

Quote from: djeZo on February 12, 2014, 03:55:42 PM

- ability to rehire rig (provider has to enable this option in admin panel - you can set how many hours prior lease expiration, current leaser can rehire the rig) - when rehiring is possible, customers will have active link to perform this

Detailed explanation about this is needed.

So what exactly happens when a lease provider enables rehire for a rig? Let us say that I enable rehire for 24 hours. So the current renter will get an active link with the possibility to rehire. What happens when he clicks the link?

Will he be charged for the current rig price per 24h or for the same proportinal price as the original rent (I hope it is the first option).

What happens if I enable rehire for 24h but I don't have a plan for 24h - will the user interface warn me about this?

So if all is succesfull for the process of rehire, the current renter will be charged for the rehire ammount and rhe rig will get an extended time without interruption?

When he clicks rehire button, he is redirected to hire page where he can select one of your rental plans.

djeZo

hero member

Activity: 588

Merit: 520

Rehire 0 means disabled. If you set 1, then current customer can do rehire when lease has only 1 hour or less.

He can hire for the prices you have on. I will add % deductions for rehires later.

Plans are to monitor pools and show in graph whether rig was mining on customers pools or not. Speed will be visible for the duration of lease.

kenshirothefist

sr. member

Activity: 457

Merit: 273

Quote from: djeZo on February 12, 2014, 03:55:42 PM

- ability to rehire rig (provider has to enable this option in admin panel - you can set how many hours prior lease expiration, current leaser can rehire the rig) - when rehiring is possible, customers will have active link to perform this

Detailed explanation about this is needed.

So what exactly happens when a lease provider enables rehire for a rig? Let us say that I enable rehire for 24 hours. So the current renter will get an active link with the possibility to rehire. What happens when he clicks the link?

Will he be charged for the current rig price per 24h or for the same proportinal price as the original rent (I hope it is the first option).

What happens if I enable rehire for 24h but I don't have a plan for 24h - will the user interface warn me about this?

So if all is succesfull for the process of rehire, the current renter will be charged for the rehire ammount and rhe rig will get an extended time without interruption?

Puycheval

member

Activity: 95

Merit: 10

Good work !

But I need some explanations

Quote from: djeZo on February 12, 2014, 03:55:42 PM

- ability to rehire rig (provider has to enable this option in admin panel - you can set how many hours prior lease expiration, current leaser can rehire the rig) - when rehiring is possible, customers will have active link to perform this

0 hour means disabled ? Or can you rehire up to last minute ?
Can the provider change price between 2 successives leases ?

Quote from: djeZo on February 12, 2014, 03:55:42 PM

- stats are now saved for the past 3 days, currently I am showing connection stability stats for past 1 hour and will gradually extend this time to 24 hours
- experimental: speed stats, graph is visible, check it out (for now only for past 1 hour)

I can see speed graph for last hour. Is there something else for stability ?

djeZo

hero member

Activity: 588

Merit: 520

Some pretty cool features implemented today:
- no more 6 confirmations needed, 2 is enough (I did some reading and figured since we mostly deal with low BTC amounts that 2 confirmations are enough)
- ability to rehire rig (provider has to enable this option in admin panel - you can set how many hours prior lease expiration, current leaser can rehire the rig) - when rehiring is possible, customers will have active link to perform this
- stats are now saved for the past 3 days, currently I am showing connection stability stats for past 1 hour and will gradually extend this time to 24 hours
- experimental: speed stats, graph is visible, check it out (for now only for past 1 hour)

djeZo

hero member

Activity: 588

Merit: 520

Quote from: lucazane on February 12, 2014, 02:01:41 PM

NEED VERTCOIN RIG !!!!

Create order and I am sure someone will fill it out if you offer good enough price for it

lucazane

legendary

Activity: 1198

Merit: 1000

NEED VERTCOIN RIG !!!!

salsamoves

newbie

Activity: 58

Merit: 0

Quote from: djeZo on February 12, 2014, 11:23:40 AM

Quote from: kenshirothefist on February 12, 2014, 11:05:32 AM

Quote from: djeZo on February 12, 2014, 10:32:24 AM

Due to these factors, earnings for providers on leaserig are higher and I have noticed that we have considerable longer renting times, because customers know they can rely on us and are not scared of loss if they hire for 3 days.

Exactly. Since LeaseRig became an established service for long run leases, I would suggest that you also add the option to rent for 7 days (=168 hours). It might be good if you let this option only for rigs that has been so far rented for at least, for example, 200 hours (in total). I bet that many leasers would offer attractive price for 7 days ... at least I would because longer lease means less work for me and shorter "no lease" times.

I will add option to purchase extra lease time (rehire rig before lease termination).

great idea!

djeZo

hero member

Activity: 588

Merit: 520

Quote from: kenshirothefist on February 12, 2014, 11:05:32 AM

Quote from: djeZo on February 12, 2014, 10:32:24 AM

Due to these factors, earnings for providers on leaserig are higher and I have noticed that we have considerable longer renting times, because customers know they can rely on us and are not scared of loss if they hire for 3 days.

Exactly. Since LeaseRig became an established service for long run leases, I would suggest that you also add the option to rent for 7 days (=168 hours). It might be good if you let this option only for rigs that has been so far rented for at least, for example, 200 hours (in total). I bet that many leasers would offer attractive price for 7 days ... at least I would because longer lease means less work for me and shorter "no lease" times.

I will add option to purchase extra lease time (rehire rig before lease termination).

kenshirothefist

sr. member

Activity: 457

Merit: 273

Quote from: djeZo on February 12, 2014, 10:32:24 AM

Due to these factors, earnings for providers on leaserig are higher and I have noticed that we have considerable longer renting times, because customers know they can rely on us and are not scared of loss if they hire for 3 days.

Exactly. Since LeaseRig became an established service for long run leases, I would suggest that you also add the option to rent for 7 days (=168 hours). It might be good if you let this option only for rigs that has been so far rented for at least, for example, 200 hours (in total). I bet that many leasers would offer attractive price for 7 days ... at least I would because longer lease means less work for me and shorter "no lease" times.

mpdas108

full member

Activity: 181

Merit: 100

Quote from: salsamoves on February 12, 2014, 10:17:25 AM

Quote from: mpdas108 on February 10, 2014, 10:14:39 PM

For your information, Middlecoin profited .0178 BTC/Mh/day yesterday, and continues..

I took a random account that seemed to have around 1mh per day and here are some averages

7 day average .0168633
15 day average .01621615
30 day average .01589596
60 day average .01496381
90 day average .01418961
130 day average .01613120

is this about right?

Yeah sounds about right

djeZo

hero member

Activity: 588

Merit: 520

Quote from: Gasai Yuno on February 12, 2014, 09:59:55 AM

i have 4,5mh/s rig but im scared when i read the how to thread lol.

its hard to rent rigs in this site i think i cant do that many things... whats that man i felt like a hard exam when started to read how to thread lol.

I was thinking about making it simpler - with cgminer proxy software, there would be no needs for port forwarding, having static IP etc.

But on the other side, these steps also make the list of providers more "reliable", because whoever would like to rent rigs over leaserig, needs to put in some effort.

If you have a chance to simply point your rig to a pool, you much more likely point it to another "more" profitable pool when it pops up, regardless if there is current rent going on. Customers on leaserig can at least be sure, that the rig(s) they hired will be there for them for the duration of lease (as long as there are, of course, no technical issues).

Due to these factors, earnings for providers on leaserig are higher and I have noticed that we have considerable longer renting times, because customers know they can rely on us and are not scared of loss if they hire for 3 days.

Topic: [ANN] LEASERIG.NET - rent&hire Quark hashing power! - page 23. (Read 106985 times)