I have wasted 4.5Gh/s for 48h, without finding any block.
I figured out what was wrong....what an idiot. I will keep the rigs running, to get a block even if the dump has already started.
If you are on AMD and you have doubts if your miners are working well on v2, send me a PM and will help
C'mon! Post the info here - isn't it easier that way? Or info is not for free?!
Here is the info:
Global hash is ~2500 Gh/s
Block is found every 6 minutes
If you mining with 4.8 Gh/s your hashrate is 500 times lower then global
it means you will need 500 times more time to find block
500 x 6 min = 3000 min = 50 Hr.
So you need to mine on average 50 Hr to find a block
in 24hr difficulty has doubled so multiple this time by at least 2
You need on average 4-5 days until you find block, so there is nothing strange nor wrong with the miner if you haven hit a block for 2 days, because your hash rate is only 4.8 Gh/s.
And this is AVERAGE, it means some will find a block in 1 hours, some will find in 200 hours, some luckers will find in 6 minutes, some smarters will never find
What do you expect? To buy 10 RX 470 for $2000 and to make 500$/day (5 blocks/day)
?
This is the calculation for today, 2 days back it was 1 block per 21h at 4.5G
The issue here is not how long it takes, it is about if you are really mining or your hash goes all to waste. I dont give a b***P for my 4.5G, but what about those with 70-80G or more...
).... I have tried everything, still no luck with that rig. On another rig,,,, same W7, it runs fine and am mining with 2 x 7970's
