Topic: [ANN] [PURK] Purk - A Cryptocurrency for Donations, Tips & Private Payments - page 7. (Read 35097 times)
June 29, 2018, 02:32:23 AM
IonicTong,is purk team planing to add purk to any big exchange?
June 28, 2018, 12:58:10 AM
Also try adding an extra line in your batch file with "pause" then the console won't quit on you and you should be able to see any potential error messages. I hope you get it running!
Thanks for response, i tried everything from discord. The fact is that it doesn't report any error, it just closes after downloading the .bin file. Looks like the miner itself has some restrictions for processors. The same settings on the computer with Intel core i5 8th (6 core) works just fine. The Xeon can't start mining. Waiting for the update of miner from developers. Anyway with the current price on Tradeorg the coin is not interesting niether for mining niether for further investment, it is already half price from what I bought it ((((
June 27, 2018, 05:06:16 AM
Following this coin, seems interesting.
This one can be a bit potential competitor with crypto Facebook coin, which might be launched next few months. June 27, 2018, 05:02:48 AM
Can I ask Developers publish short How-To for the miner? How can I set it to use only Cpu or only GPU. And where is the log stored? It crashes when I try to set the cpu mining on Xeon.
For cpu use "-a wildkeccak"For gpu use "-a wildkeccak_ocl"
On discord, in this very thread and on fairpool.xyz there are thorough guides on how to execute the miner. Hope you figure it out!
I only found "For cpu use "-a wildkeccak"" on dincord how-to-mine-purk. The miner starts and closes after downloading the bin-file on Xeon running under Windows Server.
Also try adding an extra line in your batch file with "pause" then the console won't quit on you and you should be able to see any potential error messages. I hope you get it running!
June 25, 2018, 05:45:25 PM
Following this coin, seems interesting.
June 25, 2018, 01:32:47 AM
Purk looks like noble, I'll be watching this coin and I'll try to buy it at minimum prices, apparently the good chance is now, because when the bull market comes back, maybe it will not take longer. 
June 25, 2018, 01:14:31 AM
Can I ask Developers publish short How-To for the miner? How can I set it to use only Cpu or only GPU. And where is the log stored? It crashes when I try to set the cpu mining on Xeon.
For cpu use "-a wildkeccak"For gpu use "-a wildkeccak_ocl"
On discord, in this very thread and on fairpool.xyz there are thorough guides on how to execute the miner. Hope you figure it out!
I only found "For cpu use "-a wildkeccak"" on dincord how-to-mine-purk. The miner starts and closes after downloading the bin-file on Xeon running under Windows Server.
June 24, 2018, 03:42:49 PM
I want to mine purk with cpu ryzen 1700,how can I?
June 24, 2018, 08:52:46 AM
I wish good luck for the business! Outstanding plan, a very excellent approach, sober idea.
June 24, 2018, 08:17:42 AM
purk has been nice to me
June 24, 2018, 08:15:23 AM
i use this parameters in OverDriveNtool for vega 56 Sapphire Pulse
Quote
[Profile_4]
Name=my-vega56
GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1138;950;0
GPU_P3=1269;1000;0
GPU_P4=1312;1050;0
GPU_P5=1474;1100;0
GPU_P6=1538;1150;0
GPU_P7=1408;900
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=700;900;0
Mem_P3=900;950
Fan_Min=800
Fan_Max=4900
Fan_Target=45
Fan_Acoustic=0
Power_Temp=60
Power_Target=0
Name=my-vega56
GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1138;950;0
GPU_P3=1269;1000;0
GPU_P4=1312;1050;0
GPU_P5=1474;1100;0
GPU_P6=1538;1150;0
GPU_P7=1408;900
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=700;900;0
Mem_P3=900;950
Fan_Min=800
Fan_Max=4900
Fan_Target=45
Fan_Acoustic=0
Power_Temp=60
Power_Target=0
June 23, 2018, 11:32:05 AM
is there any wattman setting for this algorithm for vega 56?
June 23, 2018, 10:17:42 AM
Sent from wallet 82 purk. The status is not confirmed within 3 days. What to do?
June 22, 2018, 04:32:30 PM
Can I ask Developers publish short How-To for the miner? How can I set it to use only Cpu or only GPU. And where is the log stored? It crashes when I try to set the cpu mining on Xeon.
For cpu use "-a wildkeccak"For gpu use "-a wildkeccak_ocl"
On discord, in this very thread and on fairpool.xyz there are thorough guides on how to execute the miner. Hope you figure it out!
June 22, 2018, 04:08:40 PM
Can I ask Developers publish short How-To for the miner? How can I set it to use only Cpu or only GPU. And where is the log stored? It crashes when I try to set the cpu mining on Xeon.
June 22, 2018, 04:02:21 PM
wow algo Wild Keccak. is this a new algo? how effective/efficient is it? AMD friendly?
June 22, 2018, 08:59:53 AM
purk wallet
Failed to load wallet: failed to read file wallet.purk.key
What I have tried to solve the problem
1 Open new wallet
2 close new wallet
3 open old wallet
failed to read file wallet.purk.key 
Any help
solved thx
Failed to load wallet: failed to read file wallet.purk.key
What I have tried to solve the problem
1 Open new wallet
2 close new wallet
3 open old wallet
failed to read file wallet.purk.key
Any help
solved thx
how pls?
discord
thanks June 21, 2018, 12:16:14 PM
Hey guys, I was a super early adopter to Purk way way back in the beginning and the one thing that really stunk is my lack of computing power for mining, truly I loved the project so much that I really wanted to rent to mine it. Im not sure if nicehash offers wildkeccack algo mining rigs but miningrigrental does not. Is there anyway to get them to add it or something? I would really love that and probably would liquidate some coins to rent some power.
June 21, 2018, 08:35:37 AM
i can not sync wallet,
The daemon will start synchronizing with the network. It may take up to several hours.
You can set the level of process detailization by using command "set_log", where is either 0 (no details), 1 (current block height synchronized), or 2 (all details).
Use "help" command to see the list of available commands.
Note: in case you need to interrupt the process, use "exit" command. Otherwise, the current progress won't be saved.
**********************************************************************
2018-Jun-21 10:35:48.646365 [P2P1]Connecting to 134.176.9.130:10110(white=1, last_seen: d0.h22.m40.s48)...
2018-Jun-21 10:35:53.728789 [P2P1]Connect failed to 134.176.9.130:10110
2018-Jun-21 10:35:53.741835 [P2P1]Connecting to 195.214.150.84:10110(white=1, last_seen: d2.h17.m5.s53)...
2018-Jun-21 10:35:55.046519 [P2P1]Connect failed to 195.214.150.84:10110
2018-Jun-21 10:35:55.051492 [P2P1]Connecting to 119.54.106.248:10110(white=1, last_seen: d0.h1.m28.s23)...
2018-Jun-21 10:35:56.704072 [P2P1]Connect failed to 119.54.106.248:10110
2018-Jun-21 10:35:56.716143 [P2P1]Connecting to 107.150.3.141:10110(white=1, last_seen: d1.h19.m56.s45)...
2018-Jun-21 10:35:58.264503 [P2P1]Connect failed to 107.150.3.141:10110
2018-Jun-21 10:35:58.274500 [P2P1]Connecting to 91.227.50.21:10110(white=0, last_seen: d5.h3.m35.s28)...
2018-Jun-21 10:35:59.642472 [P2P1]Connect failed to 91.227.50.21:10110
2018-Jun-21 10:35:59.650464 [P2P1]Connecting to 49.112.95.78:10110(white=0, last_seen: d74.h22.m5.s58)..
any idea what i can do??? am using v1.0.3
The daemon will start synchronizing with the network. It may take up to several hours.
You can set the level of process detailization by using command "set_log
Use "help" command to see the list of available commands.
Note: in case you need to interrupt the process, use "exit" command. Otherwise, the current progress won't be saved.
**********************************************************************
2018-Jun-21 10:35:48.646365 [P2P1]Connecting to 134.176.9.130:10110(white=1, last_seen: d0.h22.m40.s48)...
2018-Jun-21 10:35:53.728789 [P2P1]Connect failed to 134.176.9.130:10110
2018-Jun-21 10:35:53.741835 [P2P1]Connecting to 195.214.150.84:10110(white=1, last_seen: d2.h17.m5.s53)...
2018-Jun-21 10:35:55.046519 [P2P1]Connect failed to 195.214.150.84:10110
2018-Jun-21 10:35:55.051492 [P2P1]Connecting to 119.54.106.248:10110(white=1, last_seen: d0.h1.m28.s23)...
2018-Jun-21 10:35:56.704072 [P2P1]Connect failed to 119.54.106.248:10110
2018-Jun-21 10:35:56.716143 [P2P1]Connecting to 107.150.3.141:10110(white=1, last_seen: d1.h19.m56.s45)...
2018-Jun-21 10:35:58.264503 [P2P1]Connect failed to 107.150.3.141:10110
2018-Jun-21 10:35:58.274500 [P2P1]Connecting to 91.227.50.21:10110(white=0, last_seen: d5.h3.m35.s28)...
2018-Jun-21 10:35:59.642472 [P2P1]Connect failed to 91.227.50.21:10110
2018-Jun-21 10:35:59.650464 [P2P1]Connecting to 49.112.95.78:10110(white=0, last_seen: d74.h22.m5.s58)..
any idea what i can do??? am using v1.0.3
Sounds like you have a corrupt blockchain.bin.
Depending on your OS, open the CLI and type:
Windows
Code:
RD /S /Q "C:\User\YourUser\AppData\Roaming\purk"
Mac
Code:
sudo rm -r /Users/YourUser/Library/Application\ Support/purk
Linux
Code:
sudo rm -rf /home/ubuntu/.purk
Now relaunch your GUI wallet.
This should fix it....
June 21, 2018, 08:33:42 AM
Hi IonicTong,
I am using RX 570 4GB and 8GB as well, and I see the hashrate almost same.
With RX 570 4GB/8GB, I get 2.2-2.4 mhs.
Is there a way to increase the hashrate of 8GB GPU, at least 1.5x of 4GB GPU?
Thank you.
I am using RX 570 4GB and 8GB as well, and I see the hashrate almost same.
With RX 570 4GB/8GB, I get 2.2-2.4 mhs.
Is there a way to increase the hashrate of 8GB GPU, at least 1.5x of 4GB GPU?
Thank you.
Mining questions can also be asked via #mining on our Discord server: https://discord.gg/cqmSrfz
Jump to: