is http://pxl.minar.cc/ working?
CGminer shows blocks, but my hashrate on the pool is 0.
yes it is CGminer shows blocks, but my hashrate on the pool is 0.
Topic: [ANN] *PXL COIN* Mandatory Client Update / now supports Kimoto Gravity Well! - page 52. (Read 67826 times)
January 16, 2014, 12:47:29 AM
January 16, 2014, 12:46:11 AM
is http://pxl.minar.cc/ working?
CGminer shows blocks, but my hashrate on the pool is 0.
CGminer shows blocks, but my hashrate on the pool is 0.
January 16, 2014, 12:45:53 AM
Payments seem to be catching up on trip - I just got one.. no idea how far back it is
January 16, 2014, 12:44:23 AM
pool.pxlcoin.com coming down for a bit until the network stabilizes. The problem is the difficulty started at 0.00024 and within minutes there was probably 100mhs on the network. Blocks were being solved faster than they could be handed out to miners. The pool just can't handle this type of behavior with so many people on it and blocks solving in fractions of seconds. I need to let the crons run and catch up with all the calculations. I promise to have the board up ASAP. And all your coins are safe as well 
can you turn it back on but turn of the payments. delay them until difficulty 1 or something ?
January 16, 2014, 12:40:16 AM
can't you trun the payment off untill the difficulty stables and then start it?
I wanted that but users complaint...Tripmode tell me what to do
Keep the pool up; while blocks are being solved fast, don't run cronjobs. Wait until diff settles to process blocks
January 16, 2014, 12:39:27 AM
can't you trun the payment off untill the difficulty stables and then start it?
I wanted that but users complaint...Tripmode tell me what to do
sorry your poolsfine. i mean the other
January 16, 2014, 12:36:37 AM
can't you trun the payment off untill the difficulty stables and then start it?
I wanted that but users complaint...Tripmode tell me what to do
January 16, 2014, 12:34:19 AM
can't you trun the payment off untill the difficulty stables and then start it?
January 16, 2014, 12:33:46 AM
Minar.cc PKL PPLNS Mining Pool
I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
thats the point. to invite more people in
also you have turned off manual payment. With " Automatic Payout Threshold 1-250 PXL. Set to '0' for no auto payout." max you gonna have a lot of scared people
Sample command-line:
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
pxl.minar.cc UP AND RUNNING!I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
| URL: | stratum+tcp://pxl.minar.cc |
| PORT: | 3344 |
| USER: | username.worker |
| PASS: | workerPass |
thats the point. to invite more people in
also you have turned off manual payment. With " Automatic Payout Threshold 1-250 PXL. Set to '0' for no auto payout." max you gonna have a lot of scared people
Sample command-line:
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
you should give free fees to top 25 or something man. invite them ova
thats the point. to invite more people in
also you have turned off manual payment. With " Automatic Payout Threshold 1-250 PXL. Set to '0' for no auto payout." max you gonna have a lot of scared people
January 16, 2014, 12:29:57 AM
pool.pxlcoin.com coming down for a bit until the network stabilizes. The problem is the difficulty started at 0.00024 and within minutes there was probably 100mhs on the network. Blocks were being solved faster than they could be handed out to miners. The pool just can't handle this type of behavior with so many people on it and blocks solving in fractions of seconds. I need to let the crons run and catch up with all the calculations. I promise to have the board up ASAP. And all your coins are safe as well
January 16, 2014, 12:26:48 AM
is this another fucked up QT
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
?
I'm solomining just fine; I put my local IP above that entry you put and it all works fine. Are you sure your firewall isn't blocking the port?
Are you using multiple machines or just mining on one local machine??
on the conf file when i add
rcpallowip=*
then it blocks all connections
is this one of those coingen creations??
is it rcpallowip you are typing or rpcallowip?
rpcallowip this is coingen i think
rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=9555
daemon=1
server=1
gen=0
This is the pxlcoin.conf file I use with no problems connecting via cgminer.
Also, even if it were coingen, the overseer of the coin's future development appears to be a competent programmer with actual programming experience under his belt:
https://bitcointalksearch.org/topic/cp3u-sha-scrypt-quark-xmr-xdn-bcn-btc-ltc-qrk-win64-cpu-miner-i3i5i7-bulldozer-353448
https://github.com/palmd
It looks like he's maintained development of several coins in the past. I'd expect this one to be no different.
January 16, 2014, 12:26:26 AM
is this another fucked up QT
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
?
I'm solomining just fine; I put my local IP above that entry you put and it all works fine. Are you sure your firewall isn't blocking the port?
Are you using multiple machines or just mining on one local machine??
on the conf file when i add
rcpallowip=*
then it blocks all connections
is this one of those coingen creations??
is it rcpallowip you are typing or rpcallowip?
rpcallowip this is coingen i think
January 16, 2014, 12:24:29 AM
Minar.cc PKL PPLNS Mining Pool
I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
thats the point. to invite more people in
also you have turned off manual payment. With " Automatic Payout Threshold 1-250 PXL. Set to '0' for no auto payout." max you gonna have a lot of scared people
Sample command-line:
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
pxl.minar.cc UP AND RUNNING!I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
| URL: | stratum+tcp://pxl.minar.cc |
| PORT: | 3344 |
| USER: | username.worker |
| PASS: | workerPass |
thats the point. to invite more people in
also you have turned off manual payment. With " Automatic Payout Threshold 1-250 PXL. Set to '0' for no auto payout." max you gonna have a lot of scared people
Sample command-line:
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
you should give free fees to top 25 or something man. invite them ova
thats the point. to invite more people in
also you have turned off manual payment. With " Automatic Payout Threshold 1-250 PXL. Set to '0' for no auto payout." max you gonna have a lot of scared people
January 16, 2014, 12:20:53 AM
soon i will have enough coins to write 'SCAM' in the pxl coin site
This is probably the LEAST scammiest launch in a long long time. There's fucking 0% PREMINE GUYS! And a pretty damn cool function to boot!
This is true, now just get the pools working properly and still plenty to go around to everyone
January 16, 2014, 12:19:46 AM
is this another fucked up QT
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
?
I'm solomining just fine; I put my local IP above that entry you put and it all works fine. Are you sure your firewall isn't blocking the port?
Are you using multiple machines or just mining on one local machine??
on the conf file when i add
rcpallowip=*
then it blocks all connections
is this one of those coingen creations??
is it rcpallowip you are typing or rpcallowip?
rpcallowip this is coingen i think
January 16, 2014, 12:19:20 AM
Minar.cc PKL PPLNS Mining Pool
I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
Sample command-line:
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
pxl.minar.cc UP AND RUNNING!I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
| URL: | stratum+tcp://pxl.minar.cc |
| PORT: | 3344 |
| USER: | username.worker |
| PASS: | workerPass |
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
you should give free fees to top 25 or something man. invite them ova
January 16, 2014, 12:18:54 AM
Hi devs, can you implement getnetworkhashrate please?
January 16, 2014, 12:17:38 AM
Minar.cc PKL PPLNS Mining Pool
I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
Sample command-line:
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
pxl.minar.cc UP AND RUNNING!I have setup a VARDIFF+Stratum PPLNS Mining Pool, so you are welcome to join and spread the network hashrate.
Please let me know if you find anything out of normal, comments and suggestions also welcome!
I have set pool fees to 1% and only 0.01 PXL payout fee to pay the actual transaction fee.
pxl.minar.cc
Start your miner using the following parameters:
| URL: | stratum+tcp://pxl.minar.cc |
| PORT: | 3344 |
| USER: | username.worker |
| PASS: | workerPass |
./cgminer -o stratum+tcp://pxl.minar.cc:3344 --scrypt -u username.worker -p workerPass
you should give free fees to top 25 or something man. invite them ova
January 16, 2014, 12:13:44 AM
January 16, 2014, 12:08:27 AM
is this another fucked up QT
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
why when i enter the rcpallowip=* does it fuck all connections to the wallet?
if i remove that then it works with one machine only
why can this wallet not be used as rpc server?
?
I'm solomining just fine; I put my local IP above that entry you put and it all works fine. Are you sure your firewall isn't blocking the port?
Are you using multiple machines or just mining on one local machine??
on the conf file when i add
rcpallowip=*
then it blocks all connections
is this one of those coingen creations??
is it rcpallowip you are typing or rpcallowip?
Jump to: