QCN is doing good, but can get better with more spreaded hashrate and more promotion.
If some people can help out, don't hesitate !!
cheers
Topic: [ANN] [QCN] QuazarCoin | Full privacy&data protection | Egalitarian PoW - page 48. (Read 186566 times)
June 21, 2014, 05:59:19 AM
June 21, 2014, 05:16:38 AM
Hi folks,
don't forget to vote
Vote for QCN on Cryptsy
Vote for QCN on SwissCex
Vote for QCN on AllCoin
Vote for QCN on Comkort
and i hope we will be soon have the option to vote on Mintpal.
greetings and have a nice day
don't forget to vote
Vote for QCN on Cryptsy
Vote for QCN on SwissCex
Vote for QCN on AllCoin
Vote for QCN on Comkort
and i hope we will be soon have the option to vote on Mintpal.
greetings and have a nice day
June 21, 2014, 02:03:07 AM
Mining for pools where you are more than 1% can be rather difficult, and despite all the talk of decentralization it's actually provably less profitable to mine at a small pool than at a large pool. If it's not, then why doesn't everyone just stick with solo mining forever? Because you'll likely never find a single block that way, just like a small pool will only find blocks infrequently. A pool with 3% of the hash rate for example is likely to find about 2.7% of blocks in my experience, while a pool with 1% might only find 0.5% of the blocks. And a pool with 35% of the hash rate might find 37% of blocks. But that's a topic for discussion elsewhere.
I experimented a bit with http://qcnpool.org. With current difficulty levels for Quazarcoin it seems that starting at about 7-8KH, the pool runs smooth. As soon as the hashrate drops, it takes (much) more shares to find a block. For Monero (http://mropool.org), I had to stop the experiment as the CPU I needed to rent for this became pretty expensive...
Posted from Bitcointa.lk - #aw0r1KXrplS4qERe
June 20, 2014, 04:41:06 PM
my coins are back. thank you
June 20, 2014, 03:54:50 PM
Now the transactions are accumulated in tx pool and assigned to blocks under new criteria, for example commission and median size. If your transaction doesn't fit the conditions (e.g. exceeds block median) it waits for another block and that's why the time for the transaction can increase to infinity. If your transaction isn't transferred within 24h it's returned to your wallet.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
After sync you must type
&
commands.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
Code:
simplewallet --wallet-file=wallet.bin --pass=your_password
After sync you must type
Code:
refresh
&
Code:
save
commands.
thank you dev..my qcn are back!
Support QCN!
My coins are back too. Finaly .. Thanks.
June 20, 2014, 12:50:33 PM
Code:
2014-Jun-20 07:48:32.268542 [P2P7]Selected peer: 18041371098255128933 114.228.69
.152:23080[white=1] last_seen: d1.h20.m54.s17
2014-Jun-20 07:48:32.268542 [P2P7]Connecting to 114.228.69.152:23080(white=1, la
st_seen: d1.h20.m54.s17)...
2014-Jun-20 07:48:37.285054 [P2P7][0.0.0.0:0 OUT]Connect failed to 114.228.69.15
2:23080
2014-Jun-20 07:48:37.290511 [P2P7]Selected peer: 13263566046364305543 77.255.110
.213:23080[white=0] last_seen: d1.h14.m20.s15
2014-Jun-20 07:48:37.297790 [P2P7]Connecting to 77.255.110.213:23080(white=0, la
st_seen: d1.h14.m20.s15)...
2014-Jun-20 07:48:42.308686 [P2P7][0.0.0.0:0 OUT]Connect failed to 77.255.110.21
3:23080
2014-Jun-20 07:48:42.312319 [P2P7]Selected peer: 13679926584330439148 115.77.15.
113:23080[white=0] last_seen: d1.h14.m56.s33
2014-Jun-20 07:48:42.318686 [P2P7]Connecting to 115.77.15.113:23080(white=0, las
t_seen: d1.h14.m56.s33)...
2014-Jun-20 07:48:47.323749 [P2P7][0.0.0.0:0 OUT]Connect failed to 115.77.15.113
:23080
2014-Jun-20 07:48:47.328294 [P2P7]Selected peer: 11462659978619655692 222.50.3.2
50:23080[white=0] last_seen: d1.h16.m49.s58
2014-Jun-20 07:48:47.332310 [P2P7]Connecting to 222.50.3.250:23080(white=0, last
_seen: d1.h16.m49.s58)...
and 1 hour dont download the block
What should I do?
It's your local problem with network you can try to re-connect. Don't forget to use the 'save' & 'exit' commands.
June 20, 2014, 10:37:10 AM
Claymore GPU Miner 3.1 Beta: 600 h/s on stock 290X.
https://bitcointalksearch.org/topic/claymores-cryptonote-amd-gpu-miner-v113-638915
https://bitcointalksearch.org/topic/claymores-cryptonote-amd-gpu-miner-v113-638915
June 20, 2014, 10:22:18 AM
Extreme Pool
We offer a Pool for every Cryptonote Coin!
Features:
•2% Fee
•Longpolling Enabled on http ports - disabled for BBR Pool
•Payouts after 60 block confirmations
•Address Validation
•Latest pool code
•Variable Difficulty based on your individual CPU performance
•Verified Secure
•Servers hosted in our own Data Center, not hosted by an online 3rd party provider
•Servers secured with enterprise firewalls
Come mine with us!
http://www.extremepool.org
http://qcn.extremepool.org
We offer a Pool for every Cryptonote Coin!
Features:
•2% Fee
•Longpolling Enabled on http ports - disabled for BBR Pool
•Payouts after 60 block confirmations
•Address Validation
•Latest pool code
•Variable Difficulty based on your individual CPU performance
•Verified Secure
•Servers hosted in our own Data Center, not hosted by an online 3rd party provider
•Servers secured with enterprise firewalls
Come mine with us!
http://www.extremepool.org
http://qcn.extremepool.org
Uses the latest version binaries.
June 20, 2014, 10:18:25 AM
>>> Join QuazarCoin Pool http://qcn.hashinvest.net / EU <<<
minerd -a cryptonight -o stratum+tcp://qcn.hashinvest.net:13333 -u YOUR_ADDRESS -p x
QCN Getting Started for Linux, Windows and Mac users.
Now with instant support! / UTC+6
I added a link to Bitcointalk thread in the top posts.
Folks, you can ask all questions to Hashinvest dev here - https://bitcointalksearch.org/topic/deleted-652131.
June 20, 2014, 10:03:42 AM
Now the transactions are accumulated in tx pool and assigned to blocks under new criteria, for example commission and median size. If your transaction doesn't fit the conditions (e.g. exceeds block median) it waits for another block and that's why the time for the transaction can increase to infinity. If your transaction isn't transferred within 24h it's returned to your wallet.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
After sync you must type
&
commands.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
Code:
simplewallet --wallet-file=wallet.bin --pass=your_password
After sync you must type
Code:
refresh
&
Code:
save
commands.
thank you dev..my qcn are back!
Support QCN!
Welcome
June 20, 2014, 09:57:23 AM
June 20, 2014, 09:45:37 AM
Now the transactions are accumulated in tx pool and assigned to blocks under new criteria, for example commission and median size. If your transaction doesn't fit the conditions (e.g. exceeds block median) it waits for another block and that's why the time for the transaction can increase to infinity. If your transaction isn't transferred within 24h it's returned to your wallet.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
After sync you must type
&
commands.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
Code:
simplewallet --wallet-file=wallet.bin --pass=your_password
After sync you must type
Code:
refresh
&
Code:
save
commands.
thank you dev..my qcn are back!
Support QCN!
June 20, 2014, 09:12:40 AM
Edit: PS, I also notice that when I type balance in my wallet now, I get the following:
balance: 0.793321787690, unlocked balance: 0.652022415308
There's a difference of 0.14 QCN, give or take, and it has been like that since I sent the seven transactions. Again, confusing would be an appropriate term for what's going on. It seems like each transaction included some "dust" coins, and when the transaction is processed by the receiver I got that dust back. I can see that prior to the above my "unlocked balance" was 0.647195415308, and if I add the four "receieved" lines to that I end up with the current 0.652022415308.
balance: 0.793321787690, unlocked balance: 0.652022415308
There's a difference of 0.14 QCN, give or take, and it has been like that since I sent the seven transactions. Again, confusing would be an appropriate term for what's going on. It seems like each transaction included some "dust" coins, and when the transaction is processed by the receiver I got that dust back. I can see that prior to the above my "unlocked balance" was 0.647195415308, and if I add the four "receieved" lines to that I end up with the current 0.652022415308.
When you send a transaction a random amount is charged. It depends on the quantity of inputs and it's always bigger then the amount you've specified. After the transaction is completed you recieve the overcharged amount back.
June 20, 2014, 09:06:40 AM
Now the transactions are accumulated in tx pool and assigned to blocks under new criteria, for example commission and median size. If your transaction doesn't fit the conditions (e.g. exceeds block median) it waits for another block and that's why the time for the transaction can increase to infinity. If your transaction isn't transferred within 24h it's returned to your wallet.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
After sync you must type
&
commands.
What to do if passed 24 hours and QCN wasn't transferred and didn't return in your wallet?
You must delete the 'wallet.bin' file. Pay attention! Don't delete the '.keys' file!
After this resynchronize your wallet. You must type the command in the simplewallet window:
Code:
simplewallet --wallet-file=wallet.bin --pass=your_password
After sync you must type
Code:
refresh
&
Code:
save
commands.
June 20, 2014, 02:13:35 AM
Bittrex ferund my coin but i'm waiting from poloniex..
dev any news of transaction issues?
dev any news of transaction issues?
June 20, 2014, 02:12:29 AM
I stop mining QCN :/ Too much bug in the Wallet, everything i send in the exchange never arrive. Before there was no problem.... What's going on ?
Edit:
Here are my transaction who never arrived:
1) transfer 0 1VQpANF1pcKHPRAsZpeyG4jLDd1kbPn32YMeXkr9n8jNFvf8aaJdecB3FyAvo7X1DWJDQt3nii9eUTP 5kJSfRpL5AwT72FM 1.84 c046ad7272438caf683833d2f0a6fde7b7bdb1eac8b8ef7d53456618cd1c70d1
2014-Jun-17 17:09:19.882917 Money successfully sent, transaction
2) transfer 0 1SEtGDSVATrNhXQdSa3Burcigx126HyMuczFQJby3NsQf5xTuzQwUuvGvnfqDHNDXkSVG7DmHeJJMb3 Tj3Vi2NXb6ecfLeR 0.54 06946aa78d0a4cffa9c7c163a2ea257af0db8b242b64474881aa90ce48374fef
2014-Jun-17 18:01:33.557647 Money successfully sent, transaction <1721ebe7931686feb5cc644d935d5b2857f317084ef92104089d20946db9e2f2>
Try to send at poloniex and bittrex....
Edit:
Here are my transaction who never arrived:
1) transfer 0 1VQpANF1pcKHPRAsZpeyG4jLDd1kbPn32YMeXkr9n8jNFvf8aaJdecB3FyAvo7X1DWJDQt3nii9eUTP 5kJSfRpL5AwT72FM 1.84 c046ad7272438caf683833d2f0a6fde7b7bdb1eac8b8ef7d53456618cd1c70d1
2014-Jun-17 17:09:19.882917 Money successfully sent, transaction
2) transfer 0 1SEtGDSVATrNhXQdSa3Burcigx126HyMuczFQJby3NsQf5xTuzQwUuvGvnfqDHNDXkSVG7DmHeJJMb3 Tj3Vi2NXb6ecfLeR 0.54 06946aa78d0a4cffa9c7c163a2ea257af0db8b242b64474881aa90ce48374fef
2014-Jun-17 18:01:33.557647 Money successfully sent, transaction <1721ebe7931686feb5cc644d935d5b2857f317084ef92104089d20946db9e2f2>
Try to send at poloniex and bittrex....
More than 24H and my coins are still lost....
June 20, 2014, 01:33:45 AM
I started a general thread on CryptoNote, please join discussion under:
https://bitcointalksearch.org/topic/general-cryptonote-community-thread-658884.
https://bitcointalksearch.org/topic/general-cryptonote-community-thread-658884.
June 20, 2014, 01:11:44 AM
windows
i'have download the last binary in homepage
but is the seems
i'have set the log to 2
to see those written
without
standing still so long
i'have download the last binary in homepage
but is the seems
i'have set the log to 2
to see those written
without
standing still so long
Code:
2014-Jun-20 07:51:50.188227 Blockchain initialized. last block: 28712, d1.h14.m3
2.s13 time ago, current difficulty: 63361990
2014-Jun-20 07:51:50.188227 Core initialized OK
2014-Jun-20 07:51:50.188227 Starting core rpc server...
2014-Jun-20 07:51:50.188227 Run net_service loop( 2 threads)...
2014-Jun-20 07:51:50.219477 [SRV_MAIN]Core rpc server started ok
2014-Jun-20 07:51:50.219477 [SRV_MAIN]Starting p2p net loop...
2014-Jun-20 07:51:50.219477 [SRV_MAIN]Run net_service loop( 10 threads)...
2014-Jun-20 07:51:51.219519 [P2P7]
**********************************************************************
The daemon will start synchronizing with the network. It may take up to several
hours.
You can set the level of process detailization* through "set_log" comman
d*, whereis between 0 (no details) and 4 (very verbose).
Use "help" command to see the list of available commands.
Note: in case you need to interrupt the process, use "exit" command. Otherwise,
the current progress won't be saved.
**********************************************************************
June 20, 2014, 01:09:36 AM
Code:
2014-Jun-20 07:48:32.268542 [P2P7]Selected peer: 18041371098255128933 114.228.69
.152:23080[white=1] last_seen: d1.h20.m54.s17
2014-Jun-20 07:48:32.268542 [P2P7]Connecting to 114.228.69.152:23080(white=1, la
st_seen: d1.h20.m54.s17)...
2014-Jun-20 07:48:37.285054 [P2P7][0.0.0.0:0 OUT]Connect failed to 114.228.69.15
2:23080
2014-Jun-20 07:48:37.290511 [P2P7]Selected peer: 13263566046364305543 77.255.110
.213:23080[white=0] last_seen: d1.h14.m20.s15
2014-Jun-20 07:48:37.297790 [P2P7]Connecting to 77.255.110.213:23080(white=0, la
st_seen: d1.h14.m20.s15)...
2014-Jun-20 07:48:42.308686 [P2P7][0.0.0.0:0 OUT]Connect failed to 77.255.110.21
3:23080
2014-Jun-20 07:48:42.312319 [P2P7]Selected peer: 13679926584330439148 115.77.15.
113:23080[white=0] last_seen: d1.h14.m56.s33
2014-Jun-20 07:48:42.318686 [P2P7]Connecting to 115.77.15.113:23080(white=0, las
t_seen: d1.h14.m56.s33)...
2014-Jun-20 07:48:47.323749 [P2P7][0.0.0.0:0 OUT]Connect failed to 115.77.15.113
:23080
2014-Jun-20 07:48:47.328294 [P2P7]Selected peer: 11462659978619655692 222.50.3.2
50:23080[white=0] last_seen: d1.h16.m49.s58
2014-Jun-20 07:48:47.332310 [P2P7]Connecting to 222.50.3.250:23080(white=0, last
_seen: d1.h16.m49.s58)...
and 1 hour dont download the block
What should I do?
What operating system?
June 20, 2014, 12:49:49 AM
Code:
2014-Jun-20 07:48:32.268542 [P2P7]Selected peer: 18041371098255128933 114.228.69
.152:23080[white=1] last_seen: d1.h20.m54.s17
2014-Jun-20 07:48:32.268542 [P2P7]Connecting to 114.228.69.152:23080(white=1, la
st_seen: d1.h20.m54.s17)...
2014-Jun-20 07:48:37.285054 [P2P7][0.0.0.0:0 OUT]Connect failed to 114.228.69.15
2:23080
2014-Jun-20 07:48:37.290511 [P2P7]Selected peer: 13263566046364305543 77.255.110
.213:23080[white=0] last_seen: d1.h14.m20.s15
2014-Jun-20 07:48:37.297790 [P2P7]Connecting to 77.255.110.213:23080(white=0, la
st_seen: d1.h14.m20.s15)...
2014-Jun-20 07:48:42.308686 [P2P7][0.0.0.0:0 OUT]Connect failed to 77.255.110.21
3:23080
2014-Jun-20 07:48:42.312319 [P2P7]Selected peer: 13679926584330439148 115.77.15.
113:23080[white=0] last_seen: d1.h14.m56.s33
2014-Jun-20 07:48:42.318686 [P2P7]Connecting to 115.77.15.113:23080(white=0, las
t_seen: d1.h14.m56.s33)...
2014-Jun-20 07:48:47.323749 [P2P7][0.0.0.0:0 OUT]Connect failed to 115.77.15.113
:23080
2014-Jun-20 07:48:47.328294 [P2P7]Selected peer: 11462659978619655692 222.50.3.2
50:23080[white=0] last_seen: d1.h16.m49.s58
2014-Jun-20 07:48:47.332310 [P2P7]Connecting to 222.50.3.250:23080(white=0, last
_seen: d1.h16.m49.s58)...
and 1 hour dont download the block
What should I do?
Jump to: