Pages:
Author

Topic: [ANN] [QRK] Quark | POW/POS | 0.10.6.3 - New Self Moderated Thread - page 40. (Read 64220 times)

full member
Activity: 229
Merit: 100
Finally I synced my wallet  Smiley. When I type setgenerate true my PC starts using 100% CPU and 98% memory. It's making loud noises. Would it be bad for my PC if I stake like this for many hours?
Yes! you will kill your computer. If it has more than 1 processor, most do, Use: setgenerate true 1
Should reduce your CPU load.

If staking is your only requirement, Use: setgenerate false
Staking will still occur.

So if I type into the console.

setgenerate false
walletpassphrase mywalletpassphrase 100000

the wallet will still stake?
So what's the difference between setgenerate true and false if they both allow staking?

setgenerate true is for POW mining

setgenerate false turns the POW mining off

POS only requires unlocking wallet ie walletpassphrase mywalletpassphrase 100000 to stake via POS

You can stake your balance via POS and mine POW solo at the same time by setting setgenerate true 1 and unlocking wallet for staking POS

Quark is a very very nice Hybrid blockchain and will become recognized in due time.


Thanks very much.  So by default then the wallet is not set to mine.
sr. member
Activity: 728
Merit: 251
I found really interesting article about quarkcoin written by Vitalik Buterin.

https://bitcoinmagazine.com/articles/quarkcoin-noble-intentions-wrong-approach-1387343686/
sr. member
Activity: 728
Merit: 251
Finally I synced my wallet  Smiley. When I type setgenerate true my PC starts using 100% CPU and 98% memory. It's making loud noises. Would it be bad for my PC if I stake like this for many hours?
Yes! you will kill your computer. If it has more than 1 processor, most do, Use: setgenerate true 1
Should reduce your CPU load.

If staking is your only requirement, Use: setgenerate false
Staking will still occur.

Thanks. Now I understand.  Smiley
full member
Activity: 229
Merit: 100
Finally I synced my wallet  Smiley. When I type setgenerate true my PC starts using 100% CPU and 98% memory. It's making loud noises. Would it be bad for my PC if I stake like this for many hours?
Yes! you will kill your computer. If it has more than 1 processor, most do, Use: setgenerate true 1
Should reduce your CPU load.

If staking is your only requirement, Use: setgenerate false
Staking will still occur.

So if I type into the console.

setgenerate false
walletpassphrase mywalletpassphrase 100000

the wallet will still stake?
So what's the difference between setgenerate true and false if they both allow staking?
newbie
Activity: 59
Merit: 0
Finally I synced my wallet  Smiley. When I type setgenerate true my PC starts using 100% CPU and 98% memory. It's making loud noises. Would it be bad for my PC if I stake like this for many hours?
Yes! you will kill your computer. If it has more than 1 processor, most do, Use: setgenerate true 1
Should reduce your CPU load.

If staking is your only requirement, Use: setgenerate false
Staking will still occur.
sr. member
Activity: 728
Merit: 251
Finally I synced my wallet  Smiley. When I type setgenerate true my PC starts using 100% CPU and 98% memory. It's making loud noises. Would it be bad for my PC if I stake like this for many hours?
newbie
Activity: 5
Merit: 0
Hi, is there any way to staking on VPS ubuntu (command line)?
sr. member
Activity: 602
Merit: 250
—RUSHMOON — Automatic LP & Yield Farm & AMM on BSC
I keep getting "1 confirmation unmatured" stakes, and it just stuck there for hours.. if I close and reopen the wallet, it turns to "Generated but not accepted"..
Three times in a row now, is it normal?
Did you check your network connection? I think yours wallet get disconnect to the network.
hero member
Activity: 1050
Merit: 506
This time next year the masses will be introduced to Quark. Very exciting times ahead.  Kiss

What's the plan for next year?

Masternodes  Kiss

I think 2018 will be great for Quark  Wink
newbie
Activity: 33
Merit: 0
This time next year the masses will be introduced to Quark. Very exciting times ahead.  Kiss

What's the plan for next year?

Masternodes  Kiss
sr. member
Activity: 728
Merit: 251
This time next year the masses will be introduced to Quark. Very exciting times ahead.  Kiss

What's the plan for next year?
newbie
Activity: 33
Merit: 0
This time next year the masses will be introduced to Quark. Very exciting times ahead.  Kiss
full member
Activity: 219
Merit: 100
Been running now for 4 days, trying to stake (following all the instructions) and no coins. Is this normal?

how many coins are you staking?

88,000 coins staking.

Well if you have 88000 coins staking i guess coin age will be a factor too. Perhaps someone else can tell you 100% if they you should see some staking by now. But 88000 is quite a few

They're also very old... 81,000 of them are just over 2 years old.
It would seem you have the right ingredients to stake a coin within a day or two.
Are you sure your wallet complies with one of the following?:
1. Never been encrypted.
2. If encrypted - unlocked while you are staking.

In addition check that last block time is close to your computer's time.

Yes and Yes.

When I first started it up it staked 3 times. Then , almost a week now with nothing.
newbie
Activity: 59
Merit: 0
Been running now for 4 days, trying to stake (following all the instructions) and no coins. Is this normal?

how many coins are you staking?

88,000 coins staking.

Well if you have 88000 coins staking i guess coin age will be a factor too. Perhaps someone else can tell you 100% if they you should see some staking by now. But 88000 is quite a few

They're also very old... 81,000 of them are just over 2 years old.
It would seem you have the right ingredients to stake a coin within a day or two.
Are you sure your wallet complies with one of the following?:
1. Never been encrypted.
2. If encrypted - unlocked while you are staking.

In addition check that last block time is close to your computer's time.
newbie
Activity: 3
Merit: 0
I keep getting "1 confirmation unmatured" stakes, and it just stuck there for hours.. if I close and reopen the wallet, it turns to "Generated but not accepted"..
Three times in a row now, is it normal?

Maybe you closed your wallet during staking or your internet disconnected.

I looked 'generated but not accepted' up today myself and have stole this quote below.

Quote
When you are staking, you are in a race in a lottery system.

When staking, you are actually generating blocks that also need to be accepted by the rest of the network.
If the network accepts your block, you are rewarded with your stake amount
If the network doesnt accept your block, then your coins for that stake are returned.

As the race to accept the block finally comes down to which client can get theirs in first. If someone gets in before you and theirs gets accepted, your block will become conflicted.

All’s not lost however, the coinage is maintained for those coins, and will be used to calculate your next reward

To have the best chance of succeeding in staking you should have:

a reliable network connection,
a good number of connections to other peers

Thanks _flatlands_,  I am pretty sure my internet connection is good and stable, and in the log it shows "ERROR: DisconnectBlock() : added transaction mismatch? database corrupted"
I presume that could be the symptoms of the race condition, 3 times in a row could be really bad luck.. however if the coin age is maintained, I am still happy enough :-P
Will keep eye on those failed addresses to check if it will re stake Smiley

Just confirmed the failed address has been able to restake successfully Smiley
member
Activity: 96
Merit: 10
No problem.  I'm sure somebody will be along who knows more than I do to fill in the blanks.
newbie
Activity: 3
Merit: 0
I keep getting "1 confirmation unmatured" stakes, and it just stuck there for hours.. if I close and reopen the wallet, it turns to "Generated but not accepted"..
Three times in a row now, is it normal?

Maybe you closed your wallet during staking or your internet disconnected.

I looked 'generated but not accepted' up today myself and have stole this quote below.

Quote
When you are staking, you are in a race in a lottery system.

When staking, you are actually generating blocks that also need to be accepted by the rest of the network.
If the network accepts your block, you are rewarded with your stake amount
If the network doesnt accept your block, then your coins for that stake are returned.

As the race to accept the block finally comes down to which client can get theirs in first. If someone gets in before you and theirs gets accepted, your block will become conflicted.

All’s not lost however, the coinage is maintained for those coins, and will be used to calculate your next reward

To have the best chance of succeeding in staking you should have:

a reliable network connection,
a good number of connections to other peers

Thanks _flatlands_,  I am pretty sure my internet connection is good and stable, and in the log it shows "ERROR: DisconnectBlock() : added transaction mismatch? database corrupted"
I presume that could be the symptoms of the race condition, 3 times in a row could be really bad luck.. however if the coin age is maintained, I am still happy enough :-P
Will keep eye on those failed addresses to check if it will re stake Smiley
member
Activity: 96
Merit: 10
I keep getting "1 confirmation unmatured" stakes, and it just stuck there for hours.. if I close and reopen the wallet, it turns to "Generated but not accepted"..
Three times in a row now, is it normal?

Maybe you closed your wallet during staking or your internet disconnected.

I looked 'generated but not accepted' up today myself and have stole this quote below.

Quote
When you are staking, you are in a race in a lottery system.

When staking, you are actually generating blocks that also need to be accepted by the rest of the network.
If the network accepts your block, you are rewarded with your stake amount
If the network doesnt accept your block, then your coins for that stake are returned.

As the race to accept the block finally comes down to which client can get theirs in first. If someone gets in before you and theirs gets accepted, your block will become conflicted.

All’s not lost however, the coinage is maintained for those coins, and will be used to calculate your next reward

To have the best chance of succeeding in staking you should have:

a reliable network connection,
a good number of connections to other peers
newbie
Activity: 3
Merit: 0
I keep getting "1 confirmation unmatured" stakes, and it just stuck there for hours.. if I close and reopen the wallet, it turns to "Generated but not accepted"..
Three times in a row now, is it normal?
full member
Activity: 219
Merit: 100
Been running now for 4 days, trying to stake (following all the instructions) and no coins. Is this normal?

how many coins are you staking?

88,000 coins staking.

Well if you have 88000 coins staking i guess coin age will be a factor too. Perhaps someone else can tell you 100% if they you should see some staking by now. But 88000 is quite a few

They're also very old... 81,000 of them are just over 2 years old.
Pages:
Jump to: