[ANN] [QRK] Quark | POW/POS | 0.10.6.3 - New Self Moderated Thread - page 42.

PromethiumX

newbie

Activity: 59

Merit: 0

Quote from: Pondi on December 03, 2017, 10:19:27 PM

Quote from: PromethiumX on December 03, 2017, 08:58:22 PM

Quote from: Godmode45 on December 03, 2017, 07:12:14 PM

https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck, my 37000qrk down the drain?

You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.

Hi, I would like to know what specific issues you had with the bootstrap. The bootstrap is supposed to assist quark holders not make it more difficult. If you could share with me exactly what issues you had plus your operating system that would be useful.

I again just did a fresh install with the links and it immediately synced. Maybe your correct about the 10.6.3 version, I don't know. All I know is that I have yet to have any issue with the 64 bit version.

Thanks for sharing and assisting community members.

2003 Server 32bit after unpacking the bootstrap Database failure, would you like to rebuild - Yes - Starts Reindexing - Fails when debug log reaches 640MB.
Reindex with -printtoconsole to avoid large debug log - fails with 2.5 years remaining.
Duration 3 Days
Tried with known bootstrap - Database failure, would you like to rebuild - Yes - Currently reindexing - awaiting result.

2008 Server 64 bit Fully synced and updated database. Installed 0.10.6.3 Working fine. Controlled Clean Exit. Restart 0.10.6.3 Database failure, would you like to rebuild - Yes - Reindexing Failure.
Duration 1 Day
Scrap the lot and start over with 0.10.4.5 backup files.
Duration 1 Day

Pondi

full member

Activity: 168

Merit: 101

Quote from: Godmode45 on December 04, 2017, 04:49:20 AM

Quote from: PromethiumX on December 03, 2017, 08:58:22 PM

Quote from: Godmode45 on December 03, 2017, 07:12:14 PM

https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck, my 37000qrk down the drain?

You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.

QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ the adress in question.

I am sorry to be the bearer of bad news, but it looks like for sure you were mining a fork from the network. The address you sent then too does not exist in the explorer.
They are essentially phantom coins you will not recover....

Godmode45

newbie

Activity: 15

Merit: 0

Quote from: PromethiumX on December 03, 2017, 08:58:22 PM

Quote from: Godmode45 on December 03, 2017, 07:12:14 PM

https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck, my 37000qrk down the drain?

You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.

QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ the adress in question.

Pondi

full member

Activity: 168

Merit: 101

Quote from: Godmode45 on December 03, 2017, 07:12:14 PM

https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck, my 37000qrk down the drain?

yes you may of been mining a forked chain to get so many quarks in the time you were mining, we will have to search the chain for your balance

Pondi

full member

Activity: 168

Merit: 101

Quote from: PromethiumX on December 03, 2017, 08:58:22 PM

Quote from: Godmode45 on December 03, 2017, 07:12:14 PM

https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck, my 37000qrk down the drain?

You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.

Hi, I would like to know what specific issues you had with the bootstrap. The bootstrap is supposed to assist quark holders not make it more difficult. If you could share with me exactly what issues you had plus your operating system that would be useful.

I again just did a fresh install with the links and it immediately synced. Maybe your correct about the 10.6.3 version, I don't know. All I know is that I have yet to have any issue with the 64 bit version.

Thanks for sharing and assisting community members.

PromethiumX

newbie

Activity: 59

Merit: 0

Quote from: Godmode45 on December 03, 2017, 07:12:14 PM

https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck, my 37000qrk down the drain?

You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.

Godmode45

newbie

Activity: 15

Merit: 0

https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck, my 37000qrk down the drain?

Godmode45

newbie

Activity: 15

Merit: 0

Quote from: ianmcm on December 03, 2017, 05:07:09 PM

Quote from: Godmode45 on December 03, 2017, 04:04:26 PM

Yes 10.6.3, tryed both bootstrap and to let it sync by itself from node.
Yes balance is zero, and still zero after mining and sending more coins to the adress.
9nodes connected.
Also tryed to find adress on block explorer, but cant find it.
Really veird yea?

Sounds like you have a few problems, I'm sorry. Did you mine on a pool or solo?

The coins on wallet before upgrade to 10.6 was mined with wallet. Mined for some months and it would sux to loose the coins.
New coins to test balance/transactions was on aikapool.

ianmcm

newbie

Activity: 3

Merit: 0

Quote from: Godmode45 on December 03, 2017, 04:04:26 PM

Yes 10.6.3, tryed both bootstrap and to let it sync by itself from node.
Yes balance is zero, and still zero after mining and sending more coins to the adress.
9nodes connected.
Also tryed to find adress on block explorer, but cant find it.
Really veird yea?

Sounds like you have a few problems, I'm sorry. Did you mine on a pool or solo?

Godmode45

newbie

Activity: 15

Merit: 0

Quote from: Pondi on December 03, 2017, 01:26:04 PM

Quote from: Godmode45 on December 03, 2017, 06:28:41 AM

Quote from: ?? on ??

Quote from: Godmode45 on December 01, 2017, 11:57:02 AM

Hello
Trying to update from 9.2.7 beta, but 10.6.3 says cant import dump file.
And if I copy it into appdata\quarkcoin it wont show coins or any transaction white sync.
Switched back to 9.2.7 and sync is fine until 7 weeks, the i get "no source".

Anyone know what to do?

Save your wallet.dat file you can find it if you search %appdata% in windows which will take you to roaming folder then find Quark folder and save your wallet.dat file. put dat file in safe place and delete everything else completely.

Then download 0.10.6.3 and remove the wallet.dat file that is empty and then replace the wallet.dat file with your saved one that has your balance and transactions. Wait until your synced for balance to appear.

Follow the instructions Pondi has suggested for fast download of blockchain.

Tryed both with bootstrap and network sync, neither work.
Wont show balance or transactions. (It show right adress tho)
I set up sgminer and mined some coins and set "problem wallet adress" on payout.
Mined 15 coins but wallet dont show transactions or balance on new coins.
How is this possible?

Forgive me, but I am confused about how and what did not work.

1. Did you get the latest wallet version running and synced from the bootstrap?
2. Are you saying that your balance on your wallet is zero?

Yes 10.6.3, tryed both bootstrap and to let it sync by itself from node.
Yes balance is zero, and still zero after mining and sending more coins to the adress.
9nodes connected.
Also tryed to find adress on block explorer, but cant find it.
Really veird yea?

Pondi

full member

Activity: 168

Merit: 101

Quote from: Godmode45 on December 03, 2017, 06:28:41 AM

Quote from: ?? on ??

Quote from: Godmode45 on December 01, 2017, 11:57:02 AM

Hello
Trying to update from 9.2.7 beta, but 10.6.3 says cant import dump file.
And if I copy it into appdata\quarkcoin it wont show coins or any transaction white sync.
Switched back to 9.2.7 and sync is fine until 7 weeks, the i get "no source".

Anyone know what to do?

Save your wallet.dat file you can find it if you search %appdata% in windows which will take you to roaming folder then find Quark folder and save your wallet.dat file. put dat file in safe place and delete everything else completely.

Then download 0.10.6.3 and remove the wallet.dat file that is empty and then replace the wallet.dat file with your saved one that has your balance and transactions. Wait until your synced for balance to appear.

Follow the instructions Pondi has suggested for fast download of blockchain.

Tryed both with bootstrap and network sync, neither work.
Wont show balance or transactions. (It show right adress tho)
I set up sgminer and mined some coins and set "problem wallet adress" on payout.
Mined 15 coins but wallet dont show transactions or balance on new coins.
How is this possible?

Forgive me, but I am confused about how and what did not work.

1. Did you get the latest wallet version running and synced from the bootstrap?
2. Are you saying that your balance on your wallet is zero?

Godmode45

newbie

Activity: 15

Merit: 0

Quote from: ?? on ??

Quote from: Godmode45 on December 01, 2017, 11:57:02 AM

Hello
Trying to update from 9.2.7 beta, but 10.6.3 says cant import dump file.
And if I copy it into appdata\quarkcoin it wont show coins or any transaction white sync.
Switched back to 9.2.7 and sync is fine until 7 weeks, the i get "no source".

Anyone know what to do?

Save your wallet.dat file you can find it if you search %appdata% in windows which will take you to roaming folder then find Quark folder and save your wallet.dat file. put dat file in safe place and delete everything else completely.

Then download 0.10.6.3 and remove the wallet.dat file that is empty and then replace the wallet.dat file with your saved one that has your balance and transactions. Wait until your synced for balance to appear.

Follow the instructions Pondi has suggested for fast download of blockchain.

Tryed both with bootstrap and network sync, neither work.
Wont show balance or transactions. (It show right adress tho)
I set up sgminer and mined some coins and set "problem wallet adress" on payout.
Mined 15 coins but wallet dont show transactions or balance on new coins.
How is this possible?

_flatlands_

member

Activity: 96

Merit: 10

Quote from: DigiTone on December 02, 2017, 10:23:56 AM

Hi,

For 10.6.3 -

Do i need to download the setup.exe file or the zip file?

i have tried both - when i extract the zip file and try to open the quark-cli file a black window opens for a split second then disappears and nothing else happens. The setup.exe fails to download with a message saying virus detected (by windows defender). any idea what i need to do?

It may be getting put in quarantine by your virus protector.
If you have something like AVG you can go in the settings ->exceptions and choose the path to your quark folder.

Pondi

full member

Activity: 168

Merit: 101

Quote from: robert3harrison on December 02, 2017, 04:54:08 PM

Quote from: Pondi on December 02, 2017, 04:40:29 PM

Quote from: robert3harrison on December 02, 2017, 04:34:50 PM

Quote from: Pondi on December 02, 2017, 04:20:30 PM

Quote from: robert3harrison on December 02, 2017, 04:05:32 PM

Been running the daemon (quarkd) for almost 2 days now with 88K coins staking and no rewards. How long does it take to get a reward?

how long have your coins been sitting for without moving them to another address?

Over a year. Did get one stake 4 days ago when I was running the qui qt wallet, but nothing since restarting 2 days ago with just the daemon.

I would stick with the QT for the moment, as I know that works.

How often do you get rewards?

My rewards were arriving gradually over about 18 hours then it stopped. I closed down my wallet as I am busy running other programs atm

robert3harrison

full member

Activity: 219

Merit: 100

Quote from: Pondi on December 02, 2017, 04:40:29 PM

Quote from: robert3harrison on December 02, 2017, 04:34:50 PM

Quote from: Pondi on December 02, 2017, 04:20:30 PM

Quote from: robert3harrison on December 02, 2017, 04:05:32 PM

Been running the daemon (quarkd) for almost 2 days now with 88K coins staking and no rewards. How long does it take to get a reward?

how long have your coins been sitting for without moving them to another address?

Over a year. Did get one stake 4 days ago when I was running the qui qt wallet, but nothing since restarting 2 days ago with just the daemon.

I would stick with the QT for the moment, as I know that works.

How often do you get rewards?

Pondi

full member

Activity: 168

Merit: 101

Quote from: robert3harrison on December 02, 2017, 04:34:50 PM

Quote from: Pondi on December 02, 2017, 04:20:30 PM

Quote from: robert3harrison on December 02, 2017, 04:05:32 PM

Been running the daemon (quarkd) for almost 2 days now with 88K coins staking and no rewards. How long does it take to get a reward?

how long have your coins been sitting for without moving them to another address?

Over a year. Did get one stake 4 days ago when I was running the qui qt wallet, but nothing since restarting 2 days ago with just the daemon.

I would stick with the QT for the moment, as I know that works.

robert3harrison

full member

Activity: 219

Merit: 100

Quote from: Pondi on December 02, 2017, 04:20:30 PM

Quote from: robert3harrison on December 02, 2017, 04:05:32 PM

Been running the daemon (quarkd) for almost 2 days now with 88K coins staking and no rewards. How long does it take to get a reward?

how long have your coins been sitting for without moving them to another address?

Over a year. Did get one stake 4 days ago when I was running the qui qt wallet, but nothing since restarting 2 days ago with just the daemon.

Pondi

full member

Activity: 168

Merit: 101

Quote from: robert3harrison on December 02, 2017, 04:05:32 PM

Been running the daemon (quarkd) for almost 2 days now with 88K coins staking and no rewards. How long does it take to get a reward?

how long have your coins been sitting for without moving them to another address?

Pondi

full member

Activity: 168

Merit: 101

Quote from: DigiTone on December 02, 2017, 10:23:56 AM

Hi,

For 10.6.3 -

Do i need to download the setup.exe file or the zip file?

i have tried both - when i extract the zip file and try to open the quark-cli file a black window opens for a split second then disappears and nothing else happens. The setup.exe fails to download with a message saying virus detected (by windows defender). any idea what i need to do?

You will need both if you are having problems with downloading the chain via the nodes.
1. Windows defender should allow download of the exe, but will prevent the installation. When you get the windows defender window pop up click on more information, from there you will be able to allow anyway.

2. The bootstrap will unzip for sure with winrar. Install the free version only, there is no need to buy it, I have been using the free version for many years. https://www.win-rar.com/postdownload.html?&L=0&f=winrar-x64-550.exe&spV=true&subD=true

Follow the instructions again along with the above 2 points followed.
cheers

robert3harrison

full member

Activity: 219

Merit: 100

Been running the daemon (quarkd) for almost 2 days now with 88K coins staking and no rewards. How long does it take to get a reward?

Topic: [ANN] [QRK] Quark | POW/POS | 0.10.6.3 - New Self Moderated Thread - page 42. (Read 64320 times)