Pages:
Author

Topic: [ANN] [QRK] Quark | POW/POS | 0.10.6.3 - New Self Moderated Thread - page 41. (Read 64190 times)

legendary
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
Been running now for 4 days, trying to stake (following all the instructions) and no coins. Is this normal?

how many coins are you staking?

88,000 coins staking.

Well if you have 88000 coins staking i guess coin age will be a factor too. Perhaps someone else can tell you 100% if they you should see some staking by now. But 88000 is quite a few
full member
Activity: 219
Merit: 100
Been running now for 4 days, trying to stake (following all the instructions) and no coins. Is this normal?

how many coins are you staking?

88,000 coins staking.
newbie
Activity: 1
Merit: 0
Hi all,

I've been mining on Aikapool to a paper wallet, and since the POS update none of the pool payouts appear under my address on the block explorer. Is this a pool issue, or do I need to do something?
legendary
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
Been running now for 4 days, trying to stake (following all the instructions) and no coins. Is this normal?

how many coins are you staking?
full member
Activity: 219
Merit: 100
Been running now for 4 days, trying to stake (following all the instructions) and no coins. Is this normal?
full member
Activity: 143
Merit: 100
Quark it up!
Hello everyone, it has been a little while since I've been around and I must say that things are looking really good around here! very impressive. I do however find myself a little overwhelmed with the new wallet, as I've never used a pos coin before. Could someone please simplify for me how to ensure that I am staking my coins correctly? I would really appreciate it!

Thanks,
Rusty Cool

Start reading from page 20, should be pretty clear.


Thanks!!
full member
Activity: 229
Merit: 100
Hello everyone, it has been a little while since I've been around and I must say that things are looking really good around here! very impressive. I do however find myself a little overwhelmed with the new wallet, as I've never used a pos coin before. Could someone please simplify for me how to ensure that I am staking my coins correctly? I would really appreciate it!

Thanks,
Rusty Cool

Start reading from page 20, should be pretty clear.
full member
Activity: 143
Merit: 100
Quark it up!
Hello everyone, it has been a little while since I've been around and I must say that things are looking really good around here! very impressive. I do however find myself a little overwhelmed with the new wallet, as I've never used a pos coin before. Could someone please simplify for me how to ensure that I am staking my coins correctly? I would really appreciate it!

Thanks,
Rusty Cool
newbie
Activity: 33
Merit: 0
Softly, softly catchy monkey!  Kiss
sr. member
Activity: 728
Merit: 251
New wallet hogging 2GB of memory while syncing. How do I reduce the memory usage?
newbie
Activity: 4
Merit: 0
Hi All,

do I need to have CPU/GPU miner installed to stake? Still havent received any rewards.
I would apreciate some help with the whole process.

BTW the CPU miner is no longer available under the link:

http://sourceforge.net/projects/philosopherstone/files/QRK/

Any sugestions where can I find latest CPU/GPU miner downloads?

Furthermore do we have any informatoin about further action plan for Quark from dev/Quark team (new exchanges etc)?
legendary
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
Be good if quark can pull something together soonish.

Lots of older coins picking up interest now. Quark should be a the top of this pile.
newbie
Activity: 15
Merit: 0
https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck,  my 37000qrk down the drain?
You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.
QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ the adress in question.



Yep, that's never been used. Sent you 1000, maybe you can buy a beer to drown your sorrows.

Nice, I will send some too, great work and a fantastic spirit for others!  everyone, if you can donate, this is what crypto should be about, being a community helping one another.  It could happen to you one day, giving a few quarks if yuo can will make all the difference.

give to quark address:   QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ    if you are will and able.


Thx Pondi Smiley
newbie
Activity: 15
Merit: 0
https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck,  my 37000qrk down the drain?
You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.
QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ the adress in question.



Yep, that's never been used. Sent you 1000, maybe you can buy a beer to drown your sorrows.

Hehe Thx a lot m8 Smiley
Beer sounds like a plan,   the qrk i will save and stake until i get a truckload per coin 😎
legendary
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
what are we donating too ? someone lost their coins ? what happened
full member
Activity: 168
Merit: 101
https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck,  my 37000qrk down the drain?
You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.
QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ the adress in question.



Yep, that's never been used. Sent you 1000, maybe you can buy a beer to drown your sorrows.

Nice, I will send some too, great work and a fantastic spirit for others!  everyone, if you can donate, this is what crypto should be about, being a community helping one another.  It could happen to you one day, giving a few quarks if yuo can will make all the difference.

give to quark address:   QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ    if you are will and able.
newbie
Activity: 59
Merit: 0
It seems possible to stake with setgenerate false.


Status: 1197 confirmations
Date: 5/12/2017 02:12
Source: Minted
Reward: 6449.28648 QRK
Staked: 49 873.82472 QRK
Transaction ID

07:03:49

getmininginfo


07:03:49

{
"blocks" : 4977393,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 40491.96515443,
"errors" : "",
"genproclimit" : 1,
"networkhashps" : 32585962256,
"pooledtx" : 1,
"testnet" : false,
"chain" : "main",
"generate" : false,
"hashespersec" : 0
}
newbie
Activity: 59
Merit: 0
Taking a look at the log on sync failure.
2017-12-04 11:52:39 LoadExternalBlockFile : Deserialize or I/O error - std::bad_allocAddPortMapping(11973, 11973, 192.168.0.1) failed with code 718 (ConflictInMappingEntry)
2017-12-04 12:14:16 AddPortMapping(11973, 11973, 192.168.0.1) failed with code 718 (ConflictInMappingEntry)

It appears Upnp may be causing the failure. Is there a command line switch to disable or does it need to be disabled at compile time?
newbie
Activity: 59
Merit: 0
https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck,  my 37000qrk down the drain?
You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.
QjUrmRjAZwLFhoMFEW2FP7r11rx8amzwuZ the adress in question.



Yep, that's never been used. Sent you 1000, maybe you can buy a beer to drown your sorrows.
newbie
Activity: 59
Merit: 0
https://quarktalk.cc/threads/unable-to-send-quarks.1838/
Well this suck,  my 37000qrk down the drain?
You have told us how many quarks you have now tell us what the address is so we can check with you.
If your blockchain has not synced up to the transaction date it's very unlikely that you will see a balance.

I have had serious trouble using these bootstraps and syncing. I also believe version 0.10.6.3 corrupted my working version. (I've gone back to 0.10.6.1)
I'm testing a bootstrap I've prepared at the moment. I'll post a link when It works after being transferred to a new location.

Hi, I would like to know what specific issues you had with the bootstrap. The bootstrap is supposed to assist quark holders not make it more difficult. If you could share with me exactly what issues you had plus your operating system that would be useful.

I again just did a fresh install with the links and it immediately synced. Maybe your correct about the 10.6.3 version, I don't know. All I know is that I have yet to have any issue with the 64 bit version.

Thanks for sharing and assisting community members.
2003 Server 32bit after unpacking the bootstrap Database failure, would you like to rebuild - Yes - Starts Reindexing - Fails when debug log reaches 640MB.
Reindex with -printtoconsole to avoid large debug log - fails with 2.5 years remaining.
Duration 3 Days
Tried with known bootstrap - Database failure, would you like to rebuild - Yes - Currently reindexing - awaiting result.

2008 Server 64 bit Fully synced and updated database. Installed 0.10.6.3 Working fine. Controlled Clean Exit. Restart 0.10.6.3 Database failure, would you like to rebuild - Yes - Reindexing Failure.
Duration 1 Day
Scrap the lot and start over with 0.10.4.5 backup files.
Duration 1 Day
Pages:
Jump to: