Topic: [ANN] [QRK] Quark | POW/POS | 0.10.6.3 - New Self Moderated Thread - page 43. (Read 64320 times)
December 02, 2017, 02:09:10 PM
I tried everything. The bootstrap and reindexing. Wallet just loading blocks forever. Would it be fine if I just download the blocks from beginning with latest wallet?
December 02, 2017, 11:23:00 AM
Hi All, need to ask again just not as quote this time 
I,ve done everything from the instruction: downloaded the newest wallet version, synced, typed the staking commands, checked the mining status (genrate: true), wallet is unblocked yet so far... nothing
I have a quark balance from 2014 so I assume that staking process should work. How should it actually work? Is the staking result visible only after the declared time for unblocking wallet is passed? Can I somehow check if the staking process is working?
Will be grateful for any help.
I,ve done everything from the instruction: downloaded the newest wallet version, synced, typed the staking commands, checked the mining status (genrate: true), wallet is unblocked yet so far... nothing
I have a quark balance from 2014 so I assume that staking process should work. How should it actually work? Is the staking result visible only after the declared time for unblocking wallet is passed? Can I somehow check if the staking process is working?
Will be grateful for any help.
Staking time will still depend on stake weight i think so it will depend on how many coins you have there?
I may be incorrect but i think you may have to weight if only a small amount of coins.
good to see the old quarkers back though.
I wonder if we can reconstruct a once vibrant community. Once quark was only 2nd to doge and ltc in the alt community
Thanks for the answer. I've got only around 10 k
- far from the amounts which were mentioned in previous posts So patiance is the key
December 02, 2017, 10:52:22 AM
Hi All, need to ask again just not as quote this time
I,ve done everything from the instruction: downloaded the newest wallet version, synced, typed the staking commands, checked the mining status (genrate: true), wallet is unblocked yet so far... nothing
I have a quark balance from 2014 so I assume that staking process should work. How should it actually work? Is the staking result visible only after the declared time for unblocking wallet is passed? Can I somehow check if the staking process is working?
Will be grateful for any help.
I,ve done everything from the instruction: downloaded the newest wallet version, synced, typed the staking commands, checked the mining status (genrate: true), wallet is unblocked yet so far... nothing
I have a quark balance from 2014 so I assume that staking process should work. How should it actually work? Is the staking result visible only after the declared time for unblocking wallet is passed? Can I somehow check if the staking process is working?
Will be grateful for any help.
Staking time will still depend on stake weight i think so it will depend on how many coins you have there?
I may be incorrect but i think you may have to weight if only a small amount of coins.
good to see the old quarkers back though.
I wonder if we can reconstruct a once vibrant community. Once quark was only 2nd to doge and ltc in the alt community
December 02, 2017, 10:42:52 AM
Hi All, need to ask again just not as quote this time
I,ve done everything from the instruction: downloaded the newest wallet version, synced, typed the staking commands, checked the mining status (genrate: true), wallet is unblocked yet so far... nothing
I have a quark balance from 2014 so I assume that staking process should work. How should it actually work? Is the staking result visible only after the declared time for unblocking wallet is passed? Can I somehow check if the staking process is working?
Will be grateful for any help.
I,ve done everything from the instruction: downloaded the newest wallet version, synced, typed the staking commands, checked the mining status (genrate: true), wallet is unblocked yet so far... nothing
I have a quark balance from 2014 so I assume that staking process should work. How should it actually work? Is the staking result visible only after the declared time for unblocking wallet is passed? Can I somehow check if the staking process is working?
Will be grateful for any help.
December 02, 2017, 10:28:17 AM
Hi,
For 10.6.3 -
Do i need to download the setup.exe file or the zip file?
i have tried both - when i extract the zip file and try to open the quark-cli file a black window opens for a split second then disappears and nothing else happens. The setup.exe fails to download with a message saying virus detected (by windows defender). any idea what i need to do?
For 10.6.3 -
Do i need to download the setup.exe file or the zip file?
i have tried both - when i extract the zip file and try to open the quark-cli file a black window opens for a split second then disappears and nothing else happens. The setup.exe fails to download with a message saying virus detected (by windows defender). any idea what i need to do?
Yeah that needs to be sorted really... it probably is not a virus but a false alarm but still these things need to be ironed out since it prevents some people from installing it.
December 02, 2017, 10:23:56 AM
Hi,
For 10.6.3 -
Do i need to download the setup.exe file or the zip file?
i have tried both - when i extract the zip file and try to open the quark-cli file a black window opens for a split second then disappears and nothing else happens. The setup.exe fails to download with a message saying virus detected (by windows defender). any idea what i need to do?
For 10.6.3 -
Do i need to download the setup.exe file or the zip file?
i have tried both - when i extract the zip file and try to open the quark-cli file a black window opens for a split second then disappears and nothing else happens. The setup.exe fails to download with a message saying virus detected (by windows defender). any idea what i need to do?
December 02, 2017, 05:11:31 AM
December 02, 2017, 04:20:28 AM
To Stake:
1. install the latest update. 0.10.6.3 https://github.com/quark-project/quark/releases/tag/v0.10.6.3
2. select help - debug window
3. select console tab
4. enter into console text field: setgenerate true
5. enter into console text field: walletpassphrase mywalletpassphrase 100000
^ ^ ^
(command) (your passphrase) (number of seconds for unlock)
6. press ctrl L to clear your console.
7. close debug window and watch your coins get minted if they are 30 days old or greater.
Happy staking!!!!
Item 5. is the unlocking procedure to stake and mint your coins. This is only required if your wallet is encrypted.
Video tutorial I just found to help. https://www.youtube.com/watch?v=LIe2tqaLxfQ
1. install the latest update. 0.10.6.3 https://github.com/quark-project/quark/releases/tag/v0.10.6.3
2. select help - debug window
3. select console tab
4. enter into console text field: setgenerate true
5. enter into console text field: walletpassphrase mywalletpassphrase 100000
^ ^ ^
(command) (your passphrase) (number of seconds for unlock)
6. press ctrl L to clear your console.
7. close debug window and watch your coins get minted if they are 30 days old or greater.
Happy staking!!!!
Item 5. is the unlocking procedure to stake and mint your coins. This is only required if your wallet is encrypted.
Video tutorial I just found to help. https://www.youtube.com/watch?v=LIe2tqaLxfQ
Thank, im also staking now! what will happen after 100000 (number of seconds for unlock)
, possible to make unlimited unlocking the wallet?
December 01, 2017, 10:56:35 PM
Can I mint by just using the daemon (quarkd)?
December 01, 2017, 04:28:00 PM
The problem is that i have done it that way to, I kept the block folder tho. Does that matter?
When I did it it did sync up, but did not show balance or transactions..
When I did it it did sync up, but did not show balance or transactions..
Yes that will conflict you cannot keep anything other than your wallet.dat file that has your "data" balance and transactions with your encryption.
Follow the process in full and you will be fine and staking in no time at all.
Thx, will give it a go ☺
December 01, 2017, 04:22:55 PM
To Stake:
1. install the latest update. 0.10.6.3 https://github.com/quark-project/quark/releases/tag/v0.10.6.3
2. select help - debug window
3. select console tab
4. enter into console text field: setgenerate true
5. enter into console text field: walletpassphrase mywalletpassphrase 100000
^ ^ ^
(command) (your passphrase) (number of seconds for unlock)
6. press ctrl L to clear your console.
7. close debug window and watch your coins get minted if they are 30 days old or greater.
Happy staking!!!!
Item 5. is the unlocking procedure to stake and mint your coins. This is only required if your wallet is encrypted.
Video tutorial I just found to help. https://www.youtube.com/watch?v=LIe2tqaLxfQ
1. install the latest update. 0.10.6.3 https://github.com/quark-project/quark/releases/tag/v0.10.6.3
2. select help - debug window
3. select console tab
4. enter into console text field: setgenerate true
5. enter into console text field: walletpassphrase mywalletpassphrase 100000
^ ^ ^
(command) (your passphrase) (number of seconds for unlock)
6. press ctrl L to clear your console.
7. close debug window and watch your coins get minted if they are 30 days old or greater.
Happy staking!!!!
Item 5. is the unlocking procedure to stake and mint your coins. This is only required if your wallet is encrypted.
Video tutorial I just found to help. https://www.youtube.com/watch?v=LIe2tqaLxfQ
Thank, im also staking now! what will happen after 100000 (number of seconds for unlock)
, possible to make unlimited unlocking the wallet?
December 01, 2017, 03:59:08 PM
Howdy,
Do you have a 2018 roadmap?
Thank you
Do you have a 2018 roadmap?
Thank you
December 01, 2017, 02:43:39 PM
The problem is that i have done it that way to, I kept the block folder tho. Does that matter?
When I did it it did sync up, but did not show balance or transactions..
When I did it it did sync up, but did not show balance or transactions..
December 01, 2017, 01:41:11 PM
Hello
Trying to update from 9.2.7 beta, but 10.6.3 says cant import dump file.
And if I copy it into appdata\quarkcoin it wont show coins or any transaction white sync.
Switched back to 9.2.7 and sync is fine until 7 weeks, the i get "no source".
Anyone know what to do?
Trying to update from 9.2.7 beta, but 10.6.3 says cant import dump file.
And if I copy it into appdata\quarkcoin it wont show coins or any transaction white sync.
Switched back to 9.2.7 and sync is fine until 7 weeks, the i get "no source".
Anyone know what to do?
1. Have you made any transactions in the past seven weeks? If not then just backup wallet unsynced.
2. Despite you not being able to sync on 9.2.7 ; have you tried backing up wallet then pasting the .dat file into the quarkcoin folder?
Note: your .dat file backup needs to be named wallet.dat to work.
December 01, 2017, 11:57:02 AM
Hello
Trying to update from 9.2.7 beta, but 10.6.3 says cant import dump file.
And if I copy it into appdata\quarkcoin it wont show coins or any transaction white sync.
Switched back to 9.2.7 and sync is fine until 7 weeks, the i get "no source".
Anyone know what to do?
Trying to update from 9.2.7 beta, but 10.6.3 says cant import dump file.
And if I copy it into appdata\quarkcoin it wont show coins or any transaction white sync.
Switched back to 9.2.7 and sync is fine until 7 weeks, the i get "no source".
Anyone know what to do?
December 01, 2017, 07:31:50 AM
Where can i find "default" for enable staking?
December 01, 2017, 02:25:53 AM
indexed blockchain bootstrap being uploaded now. I will post link as soon as complete.
November 30, 2017, 02:17:53 PM
Hello, do you guys have any bootstrap for new wallet? My PC is lagging then becoming unresponsive after many hours block loading.
My mac took over 24 hours to get up to date.
I think it helps if you close the wallet down and restart it again when it seems stuck.
November 30, 2017, 02:00:46 PM
Might buy some of this, looks interesting !
good innovation.
: D
but the logo..that's the knockout !
wow
good innovation.
: D
but the logo..that's the knockout !
wow
November 30, 2017, 01:07:42 PM
Hello, do you guys have any bootstrap for new wallet? My PC is lagging then becoming unresponsive after many hours block loading.
Are you having trouble reindexing the blockchain from the previous version of quark.
Reindexing the chain took me over 6 hours on my little pc and my computer was inoperable while in process.
If however you are just trying to download a new chain on a fresh install let us know, so we can assist.
cheers
Thanks Pondi. Now my wallet is fully synced. Is it necessary to type setgenerate true or wallet will mint itself automatically?
type it to be sure or you can type command: getmininginfo
generate should equal true to be staking.
Wallet fully synced and I encrypted my wallet then restarted it. Now it's loading block index for 3 hours. Is it normal or I'm doing it wrong?
Definitely shouldn't take 3 hours... Does sometimes take a few mins for me.
Jump to: