[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 130.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: Rainman5419 on November 15, 2014, 03:05:14 AM

I know most of everyone is AMD here, but I need some help getting back into mining after taking a few month break. I'm running a Nvidia 970 and I'm interested in mining X11, Scrypt-N and Scrypt coins. I know profit isn't there anymore, but still interested. I've tried creating a bat file with the config below, but for some reason the miner is defaulting to use my processors onboard graphics.

Code:

sgminer -o stratum+tcp://ca.simplemulti.com:3344 -u User.name -p x -I 13 -o stratum+tcp://ca.simplemulti.com:3434 -u user.name -p x

use ccminer.

mfqrs3

sr. member

Activity: 419

Merit: 250

Quote from: qbits on November 27, 2014, 01:17:49 PM

Quote from: mfqrs3 on November 27, 2014, 01:07:59 PM

I was powering 6 cards with 1500W and it was enough for Scrypt mining...for X11 or similar 3 cards consume about 500-550w. With one AX1200i I'm powering 6x280x...

This is 295X2 we're discussing here.... 280X (DualX) uses about 125W so I'd agree with your results. btw, what is the hash rate you're getting and what are your clock&voltage &TC &g &I and other settings?

Same as the others unfortunately, I guess only Wolf and few others enjoy better kernels at the moment.

qbits

full member

Activity: 219

Merit: 100

Quote from: mfqrs3 on November 27, 2014, 01:07:59 PM

I was powering 6 cards with 1500W and it was enough for Scrypt mining...for X11 or similar 3 cards consume about 500-550w. With one AX1200i I'm powering 6x280x...

This is 295X2 we're discussing here.... 280X (DualX) uses about 125W so I'd agree with your results. btw, what is the hash rate you're getting and what are your clock&voltage &TC &g &I and other settings?

qbits

full member

Activity: 219

Merit: 100

Quote from: Wolf0 on November 27, 2014, 07:21:36 AM

Uh... dude, I'm powering two off of an 850W. Also, memory clocks are in the notepad, the best one is at 1700.

I see we've come down a bit since the days of scrypt(N) mining

. Today I measured power consumption off the wall for X2 and it reads approx. 380W on stock 1V and card yields 2x 5.2MH/s. (280x (dualX) undervolted uses about 125W which is phenomenal since it was using about 230W mining scrypt(N)).

Will try to undervolt a bit... indeed with 0.9V power usage drops to 300W

But what I don't get is how can you get almost double hash rate with the same power consumption. Whatever hash rate improvements you get by altering the kernel always translates into more power usage. Or does it?

Also I noticed that X2 card slows down a bit after mining for a day or so, and this has nothing to do with temperature which in in low 60s. Powerplay is as usual set to +20. Should I set it to +50?

mfqrs3

sr. member

Activity: 419

Merit: 250

Quote from: qbits on November 27, 2014, 06:33:02 AM

Quote from: Wolf0 on November 26, 2014, 01:38:41 PM

Also, I went to Windows to allow voltage changes on Hawaii, these cards are amazing!

Screenshot (NSFW): https://ottrbutt.com/miner/x11localrigwolf-11262014.png

They are amazing indeed. The only problem seems to be that in order to power 2 of them from a single PSU you'd need 1300W PSU at minimum and 1500W to be on the safe side. Quality single rail PSU of this size is hard to find.

What I wanted to ask you is: what is the voltage you're running these cards on? Also are you overclocking memory to 1500Mhz (or maybe more)? Thx!

I was powering 6 cards with 1500W and it was enough for Scrypt mining...for X11 or similar 3 cards consume about 500-550w. With one AX1200i I'm powering 6x280x...

MaxDZ8

hero member

Activity: 672

Merit: 500

Let me tell you guys I like really much the way you're cleaning up the difficulty multiplier thing. It was fairly crappy in 4.1.
But anyway, I went into parse_diff and slashed the parsed diff by 256 as a quick test... it indeed produces the usual difficulty settings and stream of shares, with the usual % of rejects.

No idea what's wrong. From a quick glance, everything seems nice to me.

Anyone mining qubit here? At least for science! Roll Eyes

MaxDZ8

hero member

Activity: 672

Merit: 500

Update on sgminer5 adventures.

I have downloaded the source and had it recompiled by applying the usual "make libcurl optional again patch".

Cannot connect anyway, but at least it works. By inspecting the gory details it turns out the new extranonce subscribing extension isn't supported by the servers I'm using. The extension... is an extension. This means optional to me. Yet the code appears to require it and won't go anywhere after getting server reply.

I went into sgminer.c, add_pool and changed

Quote

pool->extranonce_subscribe = true;

into

Quote

pool->extranonce_subscribe = false;

this gets me to hashing.

However, I suspect the difficulty is computed wrong because I cannot produce a single share in minutes.

qbits

full member

Activity: 219

Merit: 100

Quote from: Wolf0 on November 26, 2014, 01:38:41 PM

Also, I went to Windows to allow voltage changes on Hawaii, these cards are amazing!

Screenshot (NSFW): https://ottrbutt.com/miner/x11localrigwolf-11262014.png

They are amazing indeed. The only problem seems to be that in order to power 2 of them from a single PSU you'd need 1300W PSU at minimum and 1500W to be on the safe side. Quality single rail PSU of this size is hard to find.

What I wanted to ask you is: what is the voltage you're running these cards on? Also are you overclocking memory to 1500Mhz (or maybe more)? Thx!

platinum4

sr. member

Activity: 547

Merit: 250

Quote

Runtime: 393632 hrs : 17 mins : 25 secs

There's your problem, you've been running this miner since before Jesus was born.

MaxDZ8

hero member

Activity: 672

Merit: 500

I'm becoming stupid trying to make this work on my system. I have made some tests with no success. At the end I decided to start from scratch.
I have downloaded the build from nicehash a few minutes ago.
I've run just this way:

sgminer

No parameters. Input the following:

Quote

Input server details.
URL:
http://uk.p2pool.geek.nz:5567
User name:
my_myr_wallet
Password:
blah
Pool name (optional):
MYR-qubit-p2puk
Description (optional):

Profile (optional):

Algorithm (optional):
qubitcoin

A line appears... "switching", I cannot read it because it's very fast. I have tried taking a screenshot but it's really so fast.
Immediately after this, it exits with:

Quote

[10:47:25]
Summary of runtime statistics:

[10:47:25] Started at
[10:47:25] Pool: Pool:
[10:47:25] Runtime: 393632 hrs : 17 mins : 25 secs
[10:47:25] Average hashrate: 0.0 Kilohash/s
[10:47:25] Solved blocks: 0
[10:47:25] Best share difficulty: 0
[10:47:25] Share submissions: 0
[10:47:25] Accepted shares: 0
[10:47:25] Rejected shares: 0
[10:47:25] Accepted difficulty shares: 0
[10:47:25] Rejected difficulty shares: 0
[10:47:25] Hardware errors: 0
[10:47:25] Utility (accepted shares / min): 0.00/min
[10:47:25] Work Utility (diff1 shares solved / min): 0.00/min

[10:47:25] Stale submissions discarded due to new blocks: 0
[10:47:25] Unable to get work from server occasions: 0
[10:47:25] Work items generated locally: 0
[10:47:25] Submitting work remotely delay occasions: 0
[10:47:25] New blocks detected on network: 0

[10:47:25] Summary of per device statistics:

[10:47:25] GPU0 | (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.
00/m
[10:47:25]

>

Note: started at has no output there.
Runtime is wow.

Tried again with antivirus and firewall off.
Same thing.

Suggestions welcome.

--EDIT--

Another test:

Quote

URL:
stratum+tcp://mine1.myr.nonce-pool.com:3360
User name:
user.worker
Password:
blah
Pool name (optional):
MYR-noncepool
Description (optional):

Profile (optional):

Algorithm (optional):
qubitcoin
[11:24:59] Pool setup failed

It then exits without even dumping statistics.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: hero18688 on November 13, 2014, 01:01:53 PM

Quote from: Zuikkis on November 13, 2014, 11:13:28 AM

I have an interesting phenomenom with neoscrypt, on 280x.

With intensity 13, I get about 298kh/s stable. If I then lower intensity to 12, hashrate rises to 305kh/s and stays there.

However, if I start sgminer directly with intensity=12, hashrate is only 270kh/s or so, and does not rise any higher.. Sad

So it need to go through intensity 13, then lower to 12 to get max speed.

This is with latest sgminer develop version, Wolf's kernel, catalyst 14.6.

Are you saying one 280x?I got only 150k/s with one-280x. What;s your config?

Late to the party much?

sempron

newbie

Activity: 27

Merit: 0

My 280xs are Hynix and I'm only getting around 280kh/s on neoscrypt. Can someone check my config?

{
"pools": [
{
"name": "",
"url": "",
"user": "",
"pass": "",
"nfactor": "10",
"worksize": "64,64",
"algorithm": "neoscrypt",
"gpu-engine": "1100,1100",
"gpu-powertune": "20,20",
"thread-concurrency": "8192,8192",
"gpu-threads": "2,2",
"intensity": "13,13"
}

],
"failover-only": true,
"failover-switch-delay": "60",
"lookup-gap": "2,2",
"vectors": "1,1",
"gpu-fan": "50,50"
}

kingscrown

hero member

Activity: 672

Merit: 500

http://fuk.io - check it out!

where can i find windows .exes ?

yuckotheclown80

newbie

Activity: 45

Merit: 0

Guy's,

I wanna thank everyone who helped me.
But i have to give up Angry

Because nothing works.

I tried different drivers of amd.
Different versions of cl files.
I also tried cgminer for neoscrypt only.
But it all feezes the videocard.

And the weird part is.
If i mine x11 or x13 there is nothing wrong.

So again, thanks for all the help.

damm315er

sr. member

Activity: 539

Merit: 255

Great, now I'm getting spam PM's..

mamator
(snip)

Quote

Hi,

I can sell you wolf´s kernel for 0.5 btc, if you are interested contact me.

Regards

semajjames

hero member

Activity: 528

Merit: 500

Quote from: damm315er on November 26, 2014, 12:52:54 PM

Quote from: yuckotheclown80 on November 26, 2014, 12:09:27 PM

Did both.
Videocard still freezes

For the video card, are you using the CL optimized for the older cards?

+1

semajjames

hero member

Activity: 528

Merit: 500

Quote from: yuckotheclown80 on November 26, 2014, 12:09:27 PM

Quote from: semajjames on November 26, 2014, 10:27:39 AM

Quote from: yuckotheclown80 on November 26, 2014, 07:17:58 AM

Hi,

I'm using the multi-multi port of "mytradebit".
The only thing is, if it switches to neoscrypt.
My videocard freezes.
What did i do wrong ?

Code:

{
  "pools": [
    {
      "name": "TMB_Multi-Multi_X11",
      "url": "stratum+tcp://am01.eu.trademybit.com:4010",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_X13",
      "url": "stratum+tcp://am01.eu.trademybit.com:4011",
      "algorithm": "marucoin",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_X15",
      "url": "stratum+tcp://am01.eu.trademybit.com:4012",
      "algorithm": "bitblock",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_NIST5",
      "url": "stratum+tcp://am01.eu.trademybit.com:4013",
      "algorithm": "talkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_NEO",
      "url": "stratum+tcp://east01.us.trademybit.com:4014",
      "algorithm": "neoscrypt",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_X11_Backup_East",
      "url": "stratum+tcp://east01.us.trademybit.com:4440",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_X11_Backup_West",
      "url": "stratum+tcp://west01.us.trademybit.com:4440",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    }
  ],
  "profiles": [],
  "failover-only": true,
  "algorithm": "ckolivas",
  "device": "all",
  "lookup-gap": "0",
  "thread-concurrency": "4096",
  "worksize": "256",
  "gpu-threads": "1",
  "temp-cutoff": "95,95",
  "temp-overheat": "85,85",
  "temp-target": "75,75",
  "gpu-memdiff": "0,0",
  "shares": "0",
  "kernel-path": "/usr/i586-mingw32msvc/bin",
  "api-mcast-port": "4028",
  "api-port": "4028",
  "expiry": "28",
  "failover-switch-delay": "60",
  "gpu-dyninterval": "7",
  "gpu-platform": "-1",
  "hamsi-expand-big": "4",
  "log": "5",
  "no-pool-disable": true,
  "no-client-reconnect": true,
  "queue": "1",
  "scan-time": "7",
  "tcp-keepalive": "30",
  "temp-hysteresis": "3"
}

I'm using AMD XFX HD6570 + AMD APU A6-3650.
- AMD Driver 14.3
- Windows 7 64bit
- SGminer 5.1.0 dev

Thanks for the help.
And my apologies for the bad english.

try a new .config file with ONLY the neoscrypt port

and also try "lookup-gap": "2",
"gpu-platform": "0",

Did both.
Videocard still freezes

NeoScrypt MultiPort 8880 Huh

?

mvma

newbie

Activity: 25

Merit: 0

Quote from: yuckotheclown80 on November 26, 2014, 07:17:58 AM

Hi,

I'm using the multi-multi port of "mytradebit".
The only thing is, if it switches to neoscrypt.
My videocard freezes.
What did i do wrong ?

Code:

{
  "pools": [
    {
      "name": "TMB_Multi-Multi_X11",
      "url": "stratum+tcp://am01.eu.trademybit.com:4010",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_X13",
      "url": "stratum+tcp://am01.eu.trademybit.com:4011",
      "algorithm": "marucoin",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_X15",
      "url": "stratum+tcp://am01.eu.trademybit.com:4012",
      "algorithm": "bitblock",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_NIST5",
      "url": "stratum+tcp://am01.eu.trademybit.com:4013",
      "algorithm": "talkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_NEO",
      "url": "stratum+tcp://east01.us.trademybit.com:4014",
      "algorithm": "neoscrypt",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_X11_Backup_East",
      "url": "stratum+tcp://east01.us.trademybit.com:4440",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_X11_Backup_West",
      "url": "stratum+tcp://west01.us.trademybit.com:4440",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    }
  ],
  "profiles": [],
  "failover-only": true,
  "algorithm": "ckolivas",
  "device": "all",
  "lookup-gap": "0",
  "thread-concurrency": "4096",
  "worksize": "256",
  "gpu-threads": "1",
  "temp-cutoff": "95,95",
  "temp-overheat": "85,85",
  "temp-target": "75,75",
  "gpu-memdiff": "0,0",
  "shares": "0",
  "kernel-path": "/usr/i586-mingw32msvc/bin",
  "api-mcast-port": "4028",
  "api-port": "4028",
  "expiry": "28",
  "failover-switch-delay": "60",
  "gpu-dyninterval": "7",
  "gpu-platform": "-1",
  "hamsi-expand-big": "4",
  "log": "5",
  "no-pool-disable": true,
  "no-client-reconnect": true,
  "queue": "1",
  "scan-time": "7",
  "tcp-keepalive": "30",
  "temp-hysteresis": "3"
}

I'm using AMD XFX HD6570 + AMD APU A6-3650.
- AMD Driver 14.3
- Windows 7 64bit
- SGminer 5.1.0 dev

Thanks for the help.
And my apologies for the bad english.

Look some posts back ...
Your config file has not a specific profile for each alg. You must have something like that for each algo:
{
   "name": "Neoscrypt",
   "algorithm": "Neoscrypt",
   "thread-concurrency": "8192",
   "worksize": "64",
   "gpu-threads": "1",
"intensity": "12",
   "gpu-engine": "900",
   "gpu-memclock": "1250",
   "gpu-fan": "30-100"
}
And you must try allot of combinations to find the best for your hardware.
Look for others config files.

damm315er

sr. member

Activity: 539

Merit: 255

Quote from: yuckotheclown80 on November 26, 2014, 12:09:27 PM

Did both.
Videocard still freezes

For the video card, are you using the CL optimized for the older cards?

yuckotheclown80

newbie

Activity: 45

Merit: 0

Quote from: semajjames on November 26, 2014, 10:27:39 AM

Quote from: yuckotheclown80 on November 26, 2014, 07:17:58 AM

Hi,

I'm using the multi-multi port of "mytradebit".
The only thing is, if it switches to neoscrypt.
My videocard freezes.
What did i do wrong ?

Code:

{
  "pools": [
    {
      "name": "TMB_Multi-Multi_X11",
      "url": "stratum+tcp://am01.eu.trademybit.com:4010",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_X13",
      "url": "stratum+tcp://am01.eu.trademybit.com:4011",
      "algorithm": "marucoin",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_X15",
      "url": "stratum+tcp://am01.eu.trademybit.com:4012",
      "algorithm": "bitblock",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_NIST5",
      "url": "stratum+tcp://am01.eu.trademybit.com:4013",
      "algorithm": "talkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_Multi-Multi_NEO",
      "url": "stratum+tcp://east01.us.trademybit.com:4014",
      "algorithm": "neoscrypt",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_X11_Backup_East",
      "url": "stratum+tcp://east01.us.trademybit.com:4440",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    },
    {
      "name": "TMB_X11_Backup_West",
      "url": "stratum+tcp://west01.us.trademybit.com:4440",
      "algorithm": "darkcoin-mod",
      "intensity": "13",
      "user": "yuckotheclown80.multimulti",
      "pass": "x"
    }
  ],
  "profiles": [],
  "failover-only": true,
  "algorithm": "ckolivas",
  "device": "all",
  "lookup-gap": "0",
  "thread-concurrency": "4096",
  "worksize": "256",
  "gpu-threads": "1",
  "temp-cutoff": "95,95",
  "temp-overheat": "85,85",
  "temp-target": "75,75",
  "gpu-memdiff": "0,0",
  "shares": "0",
  "kernel-path": "/usr/i586-mingw32msvc/bin",
  "api-mcast-port": "4028",
  "api-port": "4028",
  "expiry": "28",
  "failover-switch-delay": "60",
  "gpu-dyninterval": "7",
  "gpu-platform": "-1",
  "hamsi-expand-big": "4",
  "log": "5",
  "no-pool-disable": true,
  "no-client-reconnect": true,
  "queue": "1",
  "scan-time": "7",
  "tcp-keepalive": "30",
  "temp-hysteresis": "3"
}

I'm using AMD XFX HD6570 + AMD APU A6-3650.
- AMD Driver 14.3
- Windows 7 64bit
- SGminer 5.1.0 dev

Thanks for the help.
And my apologies for the bad english.

try a new .config file with ONLY the neoscrypt port

and also try "lookup-gap": "2",
"gpu-platform": "0",

Did both.
Videocard still freezes

Topic: [ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 130. (Read 877846 times)