[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 133.

platinum4

sr. member

Activity: 547

Merit: 250

Quote from: Wolf0 on November 21, 2014, 04:31:41 PM

Quote from: MysteryX on November 21, 2014, 04:10:20 PM

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

This miner generates sporadic HW errors on x[n] algos, did you fork the right version?

damm315er

sr. member

Activity: 539

Merit: 255

Quote from: Wolf0 on November 21, 2014, 04:47:57 PM

Quote from: damm315er on November 21, 2014, 04:47:02 PM

Quote from: Wolf0 on November 21, 2014, 04:31:41 PM

Quote from: MysteryX on November 21, 2014, 04:10:20 PM

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

LOL, your config gives me bluescreens and driver crashes.

Anything else gives me ~100k and nothing but HW.

Back to the old and ~330k way till the dust settles a bit.. Wink

Ah... I never used it on a 290X that was running a display...

Yeah, the monitor is on a 290.. When it gets laggy is when I stop cranking that one up, but the other 290 usually doesn't tune up much faster.

But I toned your settings back quite a bit (I11, w32, powertune 20) and still driver crash on 1st attempt and blue screen on the 2nd, every time. Probably a driver issue, I've got the 14.2 in there because it worked for the other miner.

go6ooo1212

legendary

Activity: 1512

Merit: 1000

quarkchain.io

Any higher speed than 325kH/s on 280X ?

MysteryX

member

Activity: 98

Merit: 10

Quote from: Wolf0 on November 21, 2014, 04:31:41 PM

Quote from: MysteryX on November 21, 2014, 04:10:20 PM

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

Yep, and i've tried tweaking all of my other working configs, i'm getting same results as damm315er.

anatolikostis

legendary

Activity: 2026

Merit: 1005

hmmm, neoscript.cl on git & neoscript.cl of http://www.filedropper.com/sgminer-5-dev-neoscrypt-windows-wolf0 doesn`t match...
what`s the point? Cool

on the other hand - sgminer.exe of sgminer-5-dev-neoscrypt-windows-wolf0 is unstripped Huh

damm315er

sr. member

Activity: 539

Merit: 255

Quote from: Wolf0 on November 21, 2014, 04:31:41 PM

Quote from: MysteryX on November 21, 2014, 04:10:20 PM

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

LOL, your config gives me bluescreens and driver crashes.

Anything else gives me ~100k and nothing but HW.

Back to the old and ~330k way till the dust settles a bit.. Wink

MysteryX

member

Activity: 98

Merit: 10

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

semajjames

hero member

Activity: 528

Merit: 500

Quote from: Wolf0 on November 21, 2014, 02:11:40 PM

Quote from: semajjames on November 21, 2014, 02:06:44 PM

Quote from: tccd on November 21, 2014, 12:50:29 PM

4 x 290X (Hynix) overclocked @ 1200/1500

For configuration check: https://github.com/wolf9466/neo-sgminer5-hawaii/blob/master/neoscrypt.conf

thats good hash tccd

what drivers you using ?

You guys like the code? Grin

i like the potential but cant get anything like the speed's i see,,, my 290's were those unlocked ones from new then flashed with stilts 290x bios (which does increase clock speeds ect) I have to go to work size 128 to run this miner cant get off i13 but still running on 14.6 drivers

semajjames

hero member

Activity: 528

Merit: 500

Quote from: tccd on November 21, 2014, 12:50:29 PM

4 x 290X (Hynix) overclocked @ 1200/1500

For configuration check: https://github.com/wolf9466/neo-sgminer5-hawaii/blob/master/neoscrypt.conf

thats good hash tccd

what drivers you using ?

tccd

newbie

Activity: 51

Merit: 0

4 x 290X (Hynix) overclocked @ 1200/1500

http://store.picbg.net/pubpic/0E/A7/80c68e6dbdb20ea7.png

For configuration check: https://github.com/wolf9466/neo-sgminer5-hawaii/blob/master/neoscrypt.conf

semajjames

hero member

Activity: 528

Merit: 500

would it now be fair to say that this new Hawaii miner is going to work better with 14.9 drivers ?

kenshirothefist

sr. member

Activity: 457

Merit: 273

Quote from: Wolf0 on November 21, 2014, 06:11:57 AM

For you guys with Hawaii cards, or guys who just want to try something new, here: https://github.com/wolf9466/neo-sgminer5-hawaii

Should help you get this (270X, 290X, and 290X, in that order; nsfw): https://ottrbutt.com/miner/neoscryptwolf-11212014.png

Could this be merged with sgminer-dev/devel branch or did you hardcode some Hawaii stuff in this version?

damm315er

sr. member

Activity: 539

Merit: 255

Quote from: spoonuk on November 21, 2014, 11:28:20 AM

Quote from: tccd on November 21, 2014, 09:35:24 AM

Nice improvement. Thanks, Wolf0.

4 x 290X@1000/1250

What's rest of your config like?

He posted his config in this package.

https://bitcointalksearch.org/topic/m.9611400

spoonuk

newbie

Activity: 35

Merit: 0

Quote from: tccd on November 21, 2014, 09:35:24 AM

Nice improvement. Thanks, Wolf0.

4 x 290X@1000/1250
http://store.picbg.net/pubpic/6F/2F/d39e87c32ce86f2f.png

What's rest of your config like?

semajjames

hero member

Activity: 528

Merit: 500

Quote from: Wolf0 on November 21, 2014, 07:34:00 AM

Quote from: platinum4 on November 21, 2014, 07:19:45 AM

Quote from: Wolf0 on November 21, 2014, 06:28:55 AM

Quote from: Pansyfaust on November 21, 2014, 06:16:51 AM

Quote from: Wolf0 on November 21, 2014, 06:11:57 AM

For you guys with Hawaii cards, or guys who just want to try something new, here: https://github.com/wolf9466/neo-sgminer5-hawaii

Should help you get this (270X, 290X, and 290X, in that order; nsfw): https://ottrbutt.com/miner/neoscryptwolf-11212014.png

Any benefit on using the kernel on Tahiti cards (280x) at all?

Maybe - I haven't tried all settings - if you want to try something new, try it out. You'll want to change your settings, though; I basically implemented a lookup gap of 2.

Can you build a Windows 64-bit version like you normally do?

Ugh, don't make me do stuff!

Maybe you could hand the compile job over to someone you know so we would all know it was safe :-)

tccd

newbie

Activity: 51

Merit: 0

Nice improvement. Thanks, Wolf0.

4 x 290X@1000/1250
http://store.picbg.net/pubpic/6F/2F/d39e87c32ce86f2f.png

Quote from: platinum4 on November 21, 2014, 07:19:45 AM

Quote from: Wolf0 on November 21, 2014, 06:28:55 AM

Quote from: Pansyfaust on November 21, 2014, 06:16:51 AM

Quote from: Wolf0 on November 21, 2014, 06:11:57 AM

For you guys with Hawaii cards, or guys who just want to try something new, here: https://github.com/wolf9466/neo-sgminer5-hawaii

Should help you get this (270X, 290X, and 290X, in that order; nsfw): https://ottrbutt.com/miner/neoscryptwolf-11212014.png

Any benefit on using the kernel on Tahiti cards (280x) at all?

Maybe - I haven't tried all settings - if you want to try something new, try it out. You'll want to change your settings, though; I basically implemented a lookup gap of 2.

Can you build a Windows 64-bit version like you normally do?

Here is my windows build:

http://www.filedropper.com/sgminer-5-dev-neoscrypt-windows-wolf0

lobo13hf

hero member

Activity: 2268

Merit: 507

Quote from: arielbit on November 18, 2014, 05:38:16 PM

Quote from: lsss on November 18, 2014, 12:23:57 PM

Quote from: damm315er on November 18, 2014, 11:21:26 AM

Quote from: arielbit on November 18, 2014, 11:09:12 AM

haven't found a way to mine with my older cards (two 5870 and one 5830) for neoscrypt efficiently...i think it is only a matter of time till someone tweaks the miner for older cards, currently i'm using it to mine cryptonote with claymore miner and these three cards fetch me 754h/s compared to a single 280x h/s of ~600h/s....i remember when claymore later added support for older cards, the same will happen to neoscrypt miners..

Have you tried the kernel modded for older cards yet?

If not, try this: http://phoenixcoin.org/downloads/neoscrypt_vliw.cl

I'm using it for 5870's....42 kh/s each card...hopefully soon someone get's a kernel for us.

will try it.thanks.

that is very inefficient..my 7750 is at 70kh/s..5870 could double that of 7750 to about 140kh/s more..seen it double in other algo like scrpyt and cryptonote.

EDIT: it works thanks damm315er....hey lsss you should try other settings, mine is -i 11 -w 64 -g 1 (overclocked)

the ~100 kh/s is my 5830 and the 140 - 170 kh/s are my 5870's..don't know much about "WU" it is too high compared to my 280x but 0 HW which is good.

there is still the ..i'm still tweaking

do you mine sharing the whole config line i cant pass 32-36khs on my 58's? and the source of you miner as well?...

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: Wolf0 on November 21, 2014, 06:28:55 AM

Quote from: Pansyfaust on November 21, 2014, 06:16:51 AM

Quote from: Wolf0 on November 21, 2014, 06:11:57 AM

For you guys with Hawaii cards, or guys who just want to try something new, here: https://github.com/wolf9466/neo-sgminer5-hawaii

Should help you get this (270X, 290X, and 290X, in that order; nsfw): https://ottrbutt.com/miner/neoscryptwolf-11212014.png

Any benefit on using the kernel on Tahiti cards (280x) at all?

Maybe - I haven't tried all settings - if you want to try something new, try it out. You'll want to change your settings, though; I basically implemented a lookup gap of 2.

I access my mining rig remotely and try not to test "untested" kernels- if something goes wrong I have to mission to restart the PC.I have it set to restart if their are any failures etc but sometimes the fail-safes fail as well Tongue

I'll give it a go. What setting changes do you think would benefit the most? Worksize?

platinum4

sr. member

Activity: 547

Merit: 250

Quote from: Wolf0 on November 21, 2014, 06:28:55 AM

Quote from: Pansyfaust on November 21, 2014, 06:16:51 AM

Quote from: Wolf0 on November 21, 2014, 06:11:57 AM

For you guys with Hawaii cards, or guys who just want to try something new, here: https://github.com/wolf9466/neo-sgminer5-hawaii

Should help you get this (270X, 290X, and 290X, in that order; nsfw): https://ottrbutt.com/miner/neoscryptwolf-11212014.png

Any benefit on using the kernel on Tahiti cards (280x) at all?

Maybe - I haven't tried all settings - if you want to try something new, try it out. You'll want to change your settings, though; I basically implemented a lookup gap of 2.

Can you build a Windows 64-bit version like you normally do?

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: Wolf0 on November 21, 2014, 06:11:57 AM

For you guys with Hawaii cards, or guys who just want to try something new, here: https://github.com/wolf9466/neo-sgminer5-hawaii

Should help you get this (270X, 290X, and 290X, in that order; nsfw): https://ottrbutt.com/miner/neoscryptwolf-11212014.png

Any benefit on using the kernel on Tahiti cards (280x) at all?

Topic: [ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 133. (Read 877859 times)