[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 183.

badman74

hero member

Activity: 658

Merit: 500

Quote from: manlabor on July 27, 2014, 03:32:04 PM

Does this miner support cyrptonight algo?

no clue what algo are you talking about

edit: as far as i can tell there are only 2 gpu miners available for cryptonight algo, and only 1 is opensource
the opensource one is a branch of ccminer (nvidia only) https://github.com/tsiv/ccminer-cryptonight
the other is closed source, 5% donate, windows only, ati version https://bitcointalksearch.org/topic/claymores-cryptonote-amd-gpu-miner-v113-638915
more info on cryptonight gpu miner status https://bitcointalksearch.org/topic/bounty-for-open-sourced-xmrcryptonight-gpu-miner-bounties-thread-656841

badman74

hero member

Activity: 658

Merit: 500

Quote from: Singman33 on July 27, 2014, 03:23:26 PM

Quote from: Singman33 on July 25, 2014, 08:51:41 AM

I'm testing latest GIT build of v5, and I have a few drop in hashrate compared to dedicated miners :
This is for a R9 280X Tri-X
Scrypt : v5 = 755 Kh/s, ref = 760 Kh/s, it's OK
X11 : v5 = 3,2 Mh/s, ref = 3,5 Mh/s, it's less than using sph-sgminer_x11mod (https://github.com/lasybear/sph-sgminer_x11mod)
X13 : v5 = can't compile .cl files at start, should be a bug introduced recently, ref = 2,45 Mh/s (same as X11)
Keccak : v5 = 380 Mh/s, ref = 370 Mh/s, OK
Nist5 : v5 = 7 Mh/s, ref = 13 Mh/s, it's VERY BAD DROP !

Maybe I'm missing some important tweaking (each miner have his own configuration when using different kernels) but using V5 drop hashrate on most cases.
If you have suggestions (config files), post them.

Thanks.

Even worse performance when using Scrypt-N (nfactor 11).
My reference is the old vertminer (yes, still alive and working better than anyone) = 380 Kh/s
The actual sgminer-v5 is really lagging = 305-310 Kh/s.

The idea of a multi protocol miner is a good idea, but performance should be at least near the same of the dedicated miner. If you drop all optimizations done, who will use that miner ?

the dropped hash rate is a known issue (at least on some)
it was introduced as far as i can tell as an upgrade.... (don't know how it affects other cards as i only have 290 and 290x)
i found the change in groestl.cl that gives back pretty much all the lost hashes, except for scrypt/nscrypt and i think that is from 14.4/14.7 driver upgrade
x13 builds fine for me and runs at +20mh/s on my 290x, x11 at 6mh/s and i don't remember the numbers for the others (my 290x is overclocked to 1040/1500 but i think it only fave me around 200kh/s extra)
if you wanna try my prebuilt binary is in my sig

manlabor

newbie

Activity: 25

Merit: 0

Does this miner support cyrptonight algo?

Singman33

full member

Activity: 147

Merit: 100

Quote from: Singman33 on July 25, 2014, 08:51:41 AM

I'm testing latest GIT build of v5, and I have a few drop in hashrate compared to dedicated miners :
This is for a R9 280X Tri-X
Scrypt : v5 = 755 Kh/s, ref = 760 Kh/s, it's OK
X11 : v5 = 3,2 Mh/s, ref = 3,5 Mh/s, it's less than using sph-sgminer_x11mod (https://github.com/lasybear/sph-sgminer_x11mod)
X13 : v5 = can't compile .cl files at start, should be a bug introduced recently, ref = 2,45 Mh/s (same as X11)
Keccak : v5 = 380 Mh/s, ref = 370 Mh/s, OK
Nist5 : v5 = 7 Mh/s, ref = 13 Mh/s, it's VERY BAD DROP !

Maybe I'm missing some important tweaking (each miner have his own configuration when using different kernels) but using V5 drop hashrate on most cases.
If you have suggestions (config files), post them.

Thanks.

Even worse performance when using Scrypt-N (nfactor 11).
My reference is the old vertminer (yes, still alive and working better than anyone) = 380 Kh/s
The actual sgminer-v5 is really lagging = 305-310 Kh/s.

The idea of a multi protocol miner is a good idea, but performance should be at least near the same of the dedicated miner. If you drop all optimizations done, who will use that miner ?

bullus

sr. member

Activity: 294

Merit: 250

Quote from: ?? on ??

Quote from: cinnamon_carter on July 27, 2014, 02:23:11 PM

Can't believe the level of bs when people code up cool stuff all most people around here do is bitch and complain.

Try saying 'thank you' sometime, or send coins to the people who put this together if you found it useful. Read the instructions before asking foolish questions.

It is a lot more of an incentive than saying 'fuck you' for people to continue to work on things.

Been here since page 1 of the thread; fuck me right?
Posted various config files, isolated sources for loss of hashrate; restored and enhanced hashrates for many users including myself.
Edited various .cl files and found optimum settings for people, posted configs with matching hashrates and all; but, fuck me right? Grin

Cool. So, if I'm not gonna get tipped, ever, or thanked, ever, at least... can I get fucked? Will that be a promise kept? Grin

U are quoting the wrong person Wink

cinnamon was not saying it to u

cinnamon_carter

legendary

Activity: 1148

Merit: 1018

It's about time -- All merrit accepted !!!

Can't believe the level of bs when people code up cool stuff all most people around here do is bitch and complain.

Try saying 'thank you' sometime, or send coins to the people who put this together if you found it useful. Read the instructions before asking foolish questions.

It is a lot more of an incentive than saying 'fuck you' for people to continue to work on things.

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

Quote from: platinum4 on July 27, 2014, 12:46:11 PM

Quote from: Hueristic on July 27, 2014, 12:38:41 PM

TLDR

Does this have lasybear improvements?

And where is a link to the best for multi use? Seems to have to many versions around.

also I could use a generic safe setting for r9 270 for each algo.

Thx guys

What the fuck.

There are to many choices and I don't have 3 FUCKING days to read them all so if you don't like it suck my cock.

Blisk

sr. member

Activity: 412

Merit: 250

Quote from: bullus on July 27, 2014, 01:40:57 PM

Quote from: Blisk on July 27, 2014, 01:31:28 PM

Is there a way to auto restart sgminer when hashrate stops?

cgwatcher?

I know about that and some other software, but with sgminer?
It would be nice to set something in sgminer.conf if drops below sgminer restarts

Is it possible also to mine on intel graphics?

bullus

sr. member

Activity: 294

Merit: 250

Quote from: Blisk on July 27, 2014, 01:31:28 PM

Is there a way to auto restart sgminer when hashrate stops?

cgwatcher?

Blisk

sr. member

Activity: 412

Merit: 250

Is there a way to auto restart sgminer when hashrate stops?

Blisk

sr. member

Activity: 412

Merit: 250

Quote from: badman74 on July 27, 2014, 12:28:39 PM

Quote from: Blisk on July 27, 2014, 11:08:18 AM

Is anyone experience with this problem? onboard graphics is disabled in bios.
I have no temperature or fan speed in sgminer and have updated drivers to latest with amddriverdownloader.exe

1] ADL found less devices than opencl!
1] There is possibly more than one display attached to a GPU
1] Use the gpu map feature to reliably map OpenCL to ADL
1] WARNING: Number of OpenCL and ADL devices did not match!
1] Hardware monitoring may NOT match up with devices!

this is a problem if you are connecting via rdp, and sometimes with vnc as well on remote machines running windows
i found using teamviewer worked for me
also as said before try --gpu-platform 1, or --gpu-platform 0 to see if that works

Yes it was problem because of rdp, using teamviewer it shows temperature

platinum4

sr. member

Activity: 547

Merit: 250

Quote from: Hueristic on July 27, 2014, 12:38:41 PM

TLDR

Does this have lasybear improvements?

And where is a link to the best for multi use? Seems to have to many versions around.

also I could use a generic safe setting for r9 270 for each algo.

Thx guys

What the fuck.

hellyeahent

sr. member

Activity: 532

Merit: 250

is 5MH/s for 290 and 4,3 for 280x x11 good or can be better ?

Hueristic

legendary

Activity: 3836

Merit: 4969

Doomed to see the future and unable to prevent it

TLDR

Does this have lasybear improvements?

And where is a link to the best for multi use? Seems to have to many versions around.

also I could use a generic safe setting for r9 270 for each algo.

Thx guys

badman74

hero member

Activity: 658

Merit: 500

Quote from: Blisk on July 27, 2014, 11:08:18 AM

Is anyone experience with this problem? onboard graphics is disabled in bios.
I have no temperature or fan speed in sgminer and have updated drivers to latest with amddriverdownloader.exe

1] ADL found less devices than opencl!
1] There is possibly more than one display attached to a GPU
1] Use the gpu map feature to reliably map OpenCL to ADL
1] WARNING: Number of OpenCL and ADL devices did not match!
1] Hardware monitoring may NOT match up with devices!

this is a problem if you are connecting via rdp, and sometimes with vnc as well on remote machines running windows
i found using teamviewer worked for me
also as said before try --gpu-platform 1, or --gpu-platform 0 to see if that works

platinum4

sr. member

Activity: 547

Merit: 250

Quote from: Blisk on July 27, 2014, 11:08:18 AM

Is anyone experience with this problem? onboard graphics is disabled in bios.
I have no temperature or fan speed in sgminer and have updated drivers to latest with amddriverdownloader.exe

1] ADL found less devices than opencl!
1] There is possibly more than one display attached to a GPU
1] Use the gpu map feature to reliably map OpenCL to ADL
1] WARNING: Number of OpenCL and ADL devices did not match!
1] Hardware monitoring may NOT match up with devices!

gpu-platform:1 in .conf file

platinum4

sr. member

Activity: 547

Merit: 250

Quote from: xfelinho on July 27, 2014, 10:49:42 AM

is it possible to get a faster qubit gpu miner? 750 ti gets 4,2MH/s and r9 270 only 3,2 MH/s

For qubit you need to try I:21, worksize 256, gpu-threads: 1

Blisk

sr. member

Activity: 412

Merit: 250

Is anyone experience with this problem? onboard graphics is disabled in bios.
I have no temperature or fan speed in sgminer and have updated drivers to latest with amddriverdownloader.exe

1] ADL found less devices than opencl!
1] There is possibly more than one display attached to a GPU
1] Use the gpu map feature to reliably map OpenCL to ADL
1] WARNING: Number of OpenCL and ADL devices did not match!
1] Hardware monitoring may NOT match up with devices!

xfelinho

member

Activity: 68

Merit: 10

is it possible to get a faster qubit gpu miner? 750 ti gets 4,2MH/s and r9 270 only 3,2 MH/s

bullus

sr. member

Activity: 294

Merit: 250

Quote from: platinum4 on July 27, 2014, 08:32:20 AM

Quote from: bullus on July 27, 2014, 05:57:19 AM

Quote from: lbr on July 27, 2014, 05:52:06 AM

Quote from: bullus on July 27, 2014, 05:45:57 AM

unofficial oc is disabled.

So enable ; )
I did confirm by logs and power meter.

read it wrong.. thanks it works now Wink

bullus, why did you shit all over your drivers? You went from 14.7 down? Going full retard?

I was planning to do that, but now msi ab is working I'm going back to 14.7 again.
First I need to boot in safe mode,cause the gpu is flipping out when it's boot in windows, because of too low voltage I set in msi ab Sad

Topic: [ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 183. (Read 877844 times)