Topic: [ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 19. (Read 877859 times)

cheers

I do have the yescrypt .cl files

it is version sgminer-v5.2.1 from NH

https://github.com/nicehash/sgminer/releases

You are probably using a sgminer version that does not do the yescrypt algorithm.  Check your sgminer/kernel directory and make sure that you have the yescryptl.cl.
I use sgminer 5.0.1-31-g101b for yescrypt.

anyone know why my miner would make "ckolivas" .bin file when I use "algorithm" : "yescrypt", ?

cheers

anyone but me haveing problems with x11 mining with sgminer-5-1-0-optimized ?

it just stops at random times with no error. tired with debug on but still no errors shows up.

Started: [2016-02-12 17:48:31] - [0 days 01:06:55]
[18:55:25] Accepted 1e1643ff Diff 0.033/0.003 GPU 0 at DASH p2pool <-- last line

cant anyone handy do a upgrade on the optimized version to latest

Or the Dwarfpool's proxy. I notice the etherpool report lower hash rate, while the Dwarfpool report correct hash rate. However, I have higher payment from etherpool.

that wasnt it. still stops after diffent time. nothing in error just stops
is there a easy way to set so it runs for 2h then restarts it self

Which one is better qtminer on ethpool or proxy mining on coinotron?

Does the qtminer contact the pool every 2 second? Is that too long for the 15 second block time?

Yes because the blocktime is 15 seconds. If you mine to a pool, use a stratum miner. If not Solomine.

do you think the qtminer with stratum support will have more mined coins, ie more efficient, than the etherminer directly?

Etherum $ 4.61 (+31.56 %)

http://coinmarketcap.com/currencies/ethereum/#charts

Market Cap
$ 354,927,928

Turnover (24h)
$ 25,871,500

Now you know what to mine...

1. Get a deposit adress from an exchange
2. Install this, it will take 5 minutes.
3. Mine.. A used r9 280x will ROI in 40 days($140 at ebay)

http://cryptomining-blog.com/6146-ethpool-now-with-new-stratum-etherum-mining-support/

SOLVED

added
"thread-concurrency" : "0",
anmd changed the temp target
"temp-target" : "75",

0 days 19:00:25 uptime now.

GPU 0:  72.0C 2010RPM | 15.37M/15.25Mh/s | R:  1.2% HW:0 WU:0.213/m xI:512

Hi
is there any way to "select all then copy/paste" the "blocks found" part of sgminer because I need to find out if any rigs are running better than others

cheers

my sgminer stops after 1-2h of runtime dont see any errors.
the computer it self is working just fine. only sgminer that stops

my .bat file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --gpu-platform 1 -d 0 --more-notices --auto-fan --auto-gpu -c sgminer.conf

my sgminer.conf

{

"pools" :
 [
                      
{
"name" : "DASH p2pool",
"url" : "stratum+tcp://x:7903",          
"user" : "xhS",        
"pass" : "x",      
"algorithm" : "x11mod",        
"nfactor" : "10",        
"xintensity" : "1024",                        
"worksize" : "64",
"gpu-threads" : "1",
"temp-target" : "70",
"temp-cutoff" : "85",
"temp-overheat" : "80"          
},
{
              
"name" : "Digitalocean p2pool",
"url" : "stratum+tcp://x:7903",          
"user" : "xS",        
"pass" : "x",      
"algorithm" : "x11mod",        
"nfactor" : "10",        
"xintensity" : "1024",                        
"worksize" : "64",
"gpu-threads" : "1",
"temp-target" : "70",
"temp-cutoff" : "85",
"temp-overheat" : "80"          
        
},
{
              
"name" : "NiceHash Pool",
"url" : "stratum+tcp://x11.eu.nicehash.com:3336",          
"user" : "xx",        
"pass" : "x",      
"algorithm" : "x11mod",        
"nfactor" : "10",        
"xintensity" : "1024",                        
"worksize" : "64",
"gpu-threads" : "1",
"temp-target" : "70",
"temp-cutoff" : "85",
"temp-overheat" : "80"          
        
}
],
"keccak-unroll" : "0",
"hamsi-expand-big" : "4",
"lookup-gap" : "2",
"log-show-date" : "true",
"temp-target"   : "65",
"temp-cutoff"   : "80",
"temp-overheat"   : "78",
"debug-log" : "true",
"failover-only" : "true",
"failover-switch-delay" : "200",
"queue" : "0",
"api-listen" : "true",
"api-port" : "4028",
"api-allow" : "W:127.0.0.1"

}


heres a sample when i used debug to log file
http://pastebin.com/mvhFtfMN

Hello, now I have a new problem when I want to change engine clock (700), leaves me from sgminer, but when I see the trix sapphire, this as I (700), but in the sgminer remains the same (1000) I passed the same with the memories, what's the problem ?, because I have the SDK 3.0 and still can not change.

got it working now it seems. dont know what was wrong.

whats the max temp for a 390x that will not break it

i do not know your .conf file but try to change :

"gpu-fan"   : "auto", for "gpu-fan"   : "80",

80% of your GPU fan

just that the fan settings in the config dont do anything.
fans stay at 1500rpm even when the temps go up

There is a solution for higher temps, underclocking, if you can't do it with sgminer directly (or trixx or afterburner) you can do it setting voltage and clocks in bios but you must know that those values are safe. Use -at your own risk- atiwinflash.

as soon as i turn off TRIXX or afterburner the fans go down and the gpu goes up to 90c
so it seems the fan options in the config dont work