Topic: [ANN] Signatum - New Algorithm - Fair Launch - No Premine - page 404. (Read 823858 times)

Quote from: palgin on August 02, 2017, 01:28:49 PM

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

Raise intensity to 21-22 and check.

Tried everything from 14-24, nothing is better : /

1060 6GB cards

Are you sure you're running my miner or _sp miner? Seems fair speed for 6Gb on tpruvot's implementation.

Somehow i was running ccminer 2.2 from git and when i switched to this https://github.com/palginpav/ccminer/releases/tag/skunk-1
i started getting 17Mh/s
I guess i assumed the higher version was newer when looking

Thanks!

Can somebody confirm that this is legit miner without virus?

Nearly all miners have some "false positives" but here the original ccminer has much less than this adaption of it and i'm wondering what optimization could cause that raise in detections and even not just the common detections, thats about malware, ... - when i find time i'll check it in a isolated virtual environment with tracers and sniffers.

oisilener1982

full member

Activity: 280

Merit: 100

As addition to story with 1800 SIGT stolen from forum member / giveaway case:

Spoke with newstb via PM, coins were really stolen, but he quoted the wrong miner. He didn't even used my product, he used https://raw.githubusercontent.com/ccminersmod/skunksp-mod2/master/skunksp-mod1.zip , also known as "stolen -sp miner".

Wrote it to beware, maybe it really contains malware, or maybe it was really a hack, now nobody can tell.

Hope newstb will come to thread too and will prove my words

Can we test this by copy pasting some SIGT or BTC address?

project earth

member

Activity: 98

Merit: 10

Quote from: jenifive on August 02, 2017, 05:40:11 PM

Quote from: Vaim on August 02, 2017, 05:10:52 PM

Quote from: Vaim on August 02, 2017, 05:10:52 PM

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

Raise intensity to 21-22 and check.

Tried everything from 14-24, nothing is better : /

1060 6GB cards

Are you sure you're running my miner or _sp miner? Seems fair speed for 6Gb on tpruvot's implementation.

Somehow i was running ccminer 2.2 from git and when i switched to this https://github.com/palginpav/ccminer/releases/tag/skunk-1
i started getting 17Mh/s
I guess i assumed the higher version was newer when looking

Thanks!

Can somebody confirm that this is legit miner without virus?

i can,works well for me.

*MrPiP*

full member

Activity: 162

Merit: 100

Any good news for red miners here? I want to mine a bit, but I cannot Sad

Still plenty of time left to mine. Reward will be not that good though...

jenifive

sr. member

Activity: 390

Merit: 250

Quote from: palgin on August 02, 2017, 05:26:25 PM

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

Raise intensity to 21-22 and check.

Tried everything from 14-24, nothing is better : /

1060 6GB cards

Are you sure you're running my miner or _sp miner? Seems fair speed for 6Gb on tpruvot's implementation.

Somehow i was running ccminer 2.2 from git and when i switched to this https://github.com/palginpav/ccminer/releases/tag/skunk-1
i started getting 17Mh/s
I guess i assumed the higher version was newer when looking

Thanks!

Can somebody confirm that this is legit miner without virus?

Angelo38

full member

Activity: 349

Merit: 100

Hi guys, is there any optimized miner for amd, I have some rx 480 for mining

SunStruck

sr. member

Activity: 676

Merit: 250

Quote from: car1999 on August 02, 2017, 03:30:31 PM

I installed CUDA toolkit 7.5 on my ubuntu 16.04(nvOC 0018) box and it worked, thanks palgin! Since CentOS version uses CUDA 8.0, I'd suggest upgrade to CUDA 8.0 for ubuntu in next release.
BTW, do you take dev fee? If not, I think 1~2% is fine.

my hashrates:
1060 6G 16
1070 27.3
1080ti 44.6

No DEVfees, but I'll be happy if somebody someday will send me a tip to my BTC address Grin

Oh nice there is a better miner ?

Gonna try it right away, can send some sigt as thanks , dont have any btc (and not selling my sigt)

palgin

sr. member

Activity: 266

Merit: 250

Quote from: car1999 on August 02, 2017, 03:30:31 PM

I installed CUDA toolkit 7.5 on my ubuntu 16.04(nvOC 0018) box and it worked, thanks palgin! Since CentOS version uses CUDA 8.0, I'd suggest upgrade to CUDA 8.0 for ubuntu in next release.
BTW, do you take dev fee? If not, I think 1~2% is fine.

my hashrates:
1060 6G 16
1070 27.3
1080ti 44.6

No DEVfees, but I'll be happy if somebody someday will send me a tip to my BTC address Grin

Vaim

newbie

Activity: 21

Merit: 0

Quote from: mmo4me001 on August 02, 2017, 03:38:03 PM

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

Raise intensity to 21-22 and check.

Tried everything from 14-24, nothing is better : /

1060 6GB cards

Are you sure you're running my miner or _sp miner? Seems fair speed for 6Gb on tpruvot's implementation.

Somehow i was running ccminer 2.2 from git and when i switched to this https://github.com/palginpav/ccminer/releases/tag/skunk-1
i started getting 17Mh/s
I guess i assumed the higher version was newer when looking

Thanks!

gerietis

member

Activity: 100

Merit: 11

Can Any body here answer me why some coin must dependent of BTC? Example: this coin only exchange to BTC, not ETH or USDT ? Im newbie and sory for my stupid question.

really strange question
Lets take Cryptopia - exchange for SIGT.

https://www.cryptopia.co.nz/Exchange/?market=SIGT_DOGE
https://www.cryptopia.co.nz/Exchange/?market=SIGT_LTC

other coins on other exchanges have even more pairs.
but BTC is widely used because of stability and value. Just like USD in fiat money.

project earth

member

Activity: 98

Merit: 10

1060 3gb core +100, mem +500, 75% power = 17mh/s (intensity 21)

palgin`s miner
P.S. Thanks for making miner.

palgin

sr. member

Activity: 266

Merit: 250

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

Raise intensity to 21-22 and check.

Tried everything from 14-24, nothing is better : /

1060 6GB cards

Are you sure you're running my miner or _sp miner? Seems fair speed for 6Gb on tpruvot's implementation.

Vaim

newbie

Activity: 21

Merit: 0

Quote from: renozi on August 02, 2017, 04:21:37 PM

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

Raise intensity to 21-22 and check.

Tried everything from 14-24, nothing is better : /

1060 6GB cards

igotek

hero member

Activity: 2086

Merit: 608

Online Security & Investment Corporation

https://github.com/palginpav/ccminer/releases/

I have vcruntime.dll is missing error. i have download it from https://www.dlldosyaindir.com/vcruntime140-dll/ or windows 10 x64

Buy it not works. Help me to use palginpav ccminer.

I believe Palginpav's miner is x86. I installed from Microsoft website to avoid any malware issues. https://www.microsoft.com/en-us/download/details.aspx?id=53840

Yes, when i download x86 version, it works.
I had downloaded x64 before

palgin

sr. member

Activity: 266

Merit: 250

Quote from: car1999 on August 02, 2017, 04:10:11 PM

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

Raise intensity to 21-22 and check.

Vaim

newbie

Activity: 21

Merit: 0

Quote from: Vaim on August 02, 2017, 04:05:29 PM

Quote from: car1999 on August 02, 2017, 03:30:31 PM

I installed CUDA toolkit 7.5 on my ubuntu 16.04(nvOC 0018) box and it worked, thanks palgin! Since CentOS version uses CUDA 8.0, I'd suggest upgrade to CUDA 8.0 for ubuntu in next release.
BTW, do you take dev fee? If not, I think 1~2% is fine.

my hashrates:
1060 6G 16
1070 27.3
1080ti 44.6

clocks and power for 1060?

cc+100,mc 0,80watt,64C,85%fan.

damn, only getting 13,x
core 2000mhz (+100), memory 3800 unclocked, 80% power
automatic intensity 19

renozi

newbie

Activity: 12

Merit: 0

Quote from: renaissance on August 02, 2017, 03:39:45 PM

https://github.com/palginpav/ccminer/releases/

I have vcruntime.dll is missing error. i have download it from https://www.dlldosyaindir.com/vcruntime140-dll/ or windows 10 x64

Buy it not works. Help me to use palginpav ccminer.

I believe Palginpav's miner is x86. I installed from Microsoft website to avoid any malware issues. https://www.microsoft.com/en-us/download/details.aspx?id=53840

palgin

sr. member

Activity: 266

Merit: 250

Quote from: renaissance on August 02, 2017, 02:39:24 PM

Hi,
I am using a rig with 6 RX480 8GB and get this;

Am I missing sthing? Do you have any idea?

Thanks

please anybody can help?

Try changing opencl platform, seems you're mining with CPU.

Quote from: car1999 on August 02, 2017, 03:30:31 PM

https://github.com/palginpav/ccminer/releases/

I have vcruntime.dll is missing error. i have download it from https://www.dlldosyaindir.com/vcruntime140-dll/ or windows 10 x64

Buy it not works. Help me to use palginpav ccminer.

My miner is x86-based, so install x86 runtime and everything will be fine.

I installed CUDA toolkit 7.5 on my ubuntu 16.04(nvOC 0018) box and it worked, thanks palgin! Since CentOS version uses CUDA 8.0, I'd suggest upgrade to CUDA 8.0 for ubuntu in next release.
BTW, do you take dev fee? If not, I think 1~2% is fine.

my hashrates:
1060 6G 16
1070 27.3
1080ti 44.6

I'll try to update it tomorrow, just for convenience, it was a quickfix that remained for quite a long time.

Dark Oopa

newbie

Activity: 83

Merit: 0