Ccminer v3 for Nvidia: https://mega.nz/#!luRimbTI!lU9RM4T5NssDsrhkCJCyqrLNa3QX86uow_6f9671jHo
Virus total:
https://www.virustotal.com/en/file/93769ccee858d7980d9369558e6c2a64cbc279ff8f89403d462643a384477148/analysis/1501228929/
My sigt address if you wanna leave a tip: BNJAqYjgUedVc45JEBYrPUGbzqbsdcPshW
Topic: [ANN] Signatum - New Algorithm - Fair Launch - No Premine - page 441. (Read 823878 times)
You are aware that dif is fluctuating?
e.g. the day before yesterday we had a net hashrate of 2.2 Mio at peak. Now we are down to moderate 800.000 - 1.1Mio MH.
e.g. the day before yesterday we had a net hashrate of 2.2 Mio at peak. Now we are down to moderate 800.000 - 1.1Mio MH.
my ccminer hashrate is 190+, whattomine.com says I should get 700 coins per day, but suprnova gave me 620 last 24 hours, do you have the same gap? considering change a pool.
Anyone pls help. I check the dashboard on Suprnova but it does not show my current hashrate, sharerate.., it only show my balance and my worker
Wait a bit, and don't refresh the page all the time, it takes a few moments to validate you
I've already waited about one hours
Ah I see what you mean, I'll fix it, hang on
Tks for your support , it works well now
I've already waited about one hours
Switch between dashboard tabs to increase response. You may be unauthorized as well (suprnova's frontend hadles sessions badly). However, no pool (mining) issues present for now.
https:/[Suspicious link removed]/DVE7SMDFOc
Coversnail backdoor - target cryptocurrency
Coversnail backdoor - target cryptocurrency
Anyone pls help. I check the dashboard on Suprnova but it does not show my current hashrate, sharerate.., it only show my balance and my worker
Wait a bit, and don't refresh the page all the time, it takes a few moments to validate you
I've already waited about one hours
Ah I see what you mean, I'll fix it, hang on
Palgin sorry, maybe my AV is just over sensitive, I updated it the other day and it started flagging everything.
Your program is fine. I tried it with my Overclocked gtx 1070 - core +105mhz, and ram +400Mhz, I'm getting 28.4Mhs at intensity 22. The GPU stays at 70 celcius - really cool. Not really complaining about the mining performance. This algorithm doesn't really wear down your mining equipment like other algorithms do.
Your program is fine. I tried it with my Overclocked gtx 1070 - core +105mhz, and ram +400Mhz, I'm getting 28.4Mhs at intensity 22. The GPU stays at 70 celcius - really cool. Not really complaining about the mining performance. This algorithm doesn't really wear down your mining equipment like other algorithms do.
Anyone pls help. I check the dashboard on Suprnova but it does not show my current hashrate, sharerate.., it only show my balance and my worker
Wait a bit, and don't refresh the page all the time, it takes a few moments to validate you
I've already waited about one hours
Anyone pls help. I check the dashboard on Suprnova but it does not show my current hashrate, sharerate.., it only show my balance and my worker
Wait a bit, and don't refresh the page all the time, it takes a few moments to validate you
Anyone pls help. I check the dashboard on Suprnova but it does not show my current hashrate, sharerate.., it only show my balance and my worker
this is my first look at all of this SIGNATUM but it sounds great , going to invest and see what happens
Does anybody else having problems with there wallet not syncing? I have 9 active connections and wallet been out of sync for more than an hour and it was in sync earlier today.
Still cannot get my Windows QT wallet to sync any suggestions out there?
Stop your wallet, delete all contents of /your_username/AppData/Roaming/Signatum , except wallet.dat and signatum.conf, start your wallet again and everything should work.
Worked Thanks
People, I'm really tired replying PMs with the same content - "bla-bla-bla, it's a virus, gimme source, etc.". I really thought to stick to virus-developement, so it won't blaming for nothing as it happens now.
Think it's clear for everybody that mine and sp's miners have the same opensource base, small difference in code tuning and architecture (sp's 64-bit).
Please, don't PM if you want to blame me, do it in the thread, or open a new thread for abuse, I miss really interesting messages in that mess.
Thank you for understanding.
Think it's clear for everybody that mine and sp's miners have the same opensource base, small difference in code tuning and architecture (sp's 64-bit).
Please, don't PM if you want to blame me, do it in the thread, or open a new thread for abuse, I miss really interesting messages in that mess.
Thank you for understanding.
thanks for the miner palgin! running my 1080tis at 46 with PL at 70%
hopefully when sp releases his v.4, may be we can all benefit with the speed increase
these algos give out least amount heat when mining on Nvidia:
- skunkhash 75° BEST
- tribus 77°
- nist5 81°
- x11-gost 82°
- skunkhash 75° BEST
- tribus 77°
- nist5 81°
- x11-gost 82°
Does anybody else having problems with there wallet not syncing? I have 9 active connections and wallet been out of sync for more than an hour and it was in sync earlier today.
Still cannot get my Windows QT wallet to sync any suggestions out there?
Stop your wallet, delete all contents of /your_username/AppData/Roaming/Signatum , except wallet.dat and signatum.conf, start your wallet again and everything should work.
Thanks for your post...
Its worked for me... I got my signatum coins finally..
The problem with the wrong algos also appears on pool.mn
75% efficiency tells the story.
Can all of you please check their efficency in their mining pool dashboards? It does not help to waste hashrate and energy.
75% efficiency tells the story.
Can all of you please check their efficency in their mining pool dashboards? It does not help to waste hashrate and energy.
Actually the problem is no problem because the invalid shares don't get paid - so as long as your efficiency is okay, everything is good.
MPOS is actually really misleading about the efficiency.
About the coin specifically.
I'm new into all of this. But I can see that the Signatum team are quite organized - they got the miners running on 8 pools already. They got on the exchange quite early and keep working on other things. I think this coin reminds me of Monero - privacy coin but with a completely different algorithm. But Monero is Pow and Signatum is Pow+Pos, so Signatum is more eco-friendly - will burn much less electricity over long run. If they add more features and expand the community then it can easily compete with Monero and Bitcoin over long run. I read the White Paper - it looks fine to me. I also like that it's the most Nvidia friendly coin, so it appeals to the equihash crowd. I think many people like this coin. Just 2 cents from somebody who's very new to crypto world.
I'm new into all of this. But I can see that the Signatum team are quite organized - they got the miners running on 8 pools already. They got on the exchange quite early and keep working on other things. I think this coin reminds me of Monero - privacy coin but with a completely different algorithm. But Monero is Pow and Signatum is Pow+Pos, so Signatum is more eco-friendly - will burn much less electricity over long run. If they add more features and expand the community then it can easily compete with Monero and Bitcoin over long run. I read the White Paper - it looks fine to me. I also like that it's the most Nvidia friendly coin, so it appeals to the equihash crowd. I think many people like this coin. Just 2 cents from somebody who's very new to crypto world.
The problem with the wrong algos also appears on pool.mn
75% efficiency tells the story.
Can all of you please check their efficency in their mining pool dashboards? It does not help to waste hashrate and energy.
75% efficiency tells the story.
Can all of you please check their efficency in their mining pool dashboards? It does not help to waste hashrate and energy.
Ubuntu binary:
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
Unfortunately not working here :
*** ccminer alexis-1.0 palgin skunkmod for nVidia GPUs from alexis78@github ***
*** Built with the nVidia CUDA Toolkit 8.0 (Not recommended prefer 7.5)
*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.
*** Skunk algo modded by palgin
Illegal instruction
I experience this too. Any solution?
As I posted earlier:
Workaround for Ubuntu bins and their errors:
1) sudo apt install nvidia-cuda-toolkit
2) sudo apt install libcurl4-openssl-dev
3) sudo apt install libssl-dev
4) if it keeps thowing errors about CUDA libs, run "sudo ldconfig /your/cuda/libs/path" , 32-bit versions
5) Reboot if you want
Try installing CUDA 8 toolkit, error shows that instructions used during kernel launch are unsupported in your version of CUDA. Please, check and reply, I've specially installed Ubuntu on several hosts and tested, after manipulations I've mentioned earlier everything worked fine.
Jump to: