[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 310.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: Biffa on November 05, 2014, 04:59:16 AM

...
Gone from 1.3x to ~~1.5x~~ 1.665TH and climbing now, back temperatures gone from 37 to ~~67°C~~ 77°C!

Keep your room cozy and warm in the winter ...

edgar

legendary

Activity: 1848

Merit: 1001

sorry Biff, yea 288.

fan up to 100

Start Voltage - 0.695

Temp Front / Back T,B
36 °C / 84,80 °C

1.552 TH/s

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: edgar on November 05, 2014, 03:20:17 AM

already updated before it became inaccessible.

just installing google remote now.

i sent you a skype request a few minutes ago

e2a - myminer does not seem to work at all now. i can see neither SPx

2nd edit - Much Thanks to Zvi, 15minutes and im at least stable now at 1.5TH/s

needed to up the max watts & fan speed (its quite warm here)

Did you set max watts to 288?

[edit]Trying 288

I'm using an EVGA 1300W G2 so power shouldn't be an issue.

Gone from 1.3x to ~~1.5x~~ 1.665TH and climbing now, back temperatures gone from 37 to ~~67°C~~ 77°C!

Biffa

legendary

Activity: 3234

Merit: 1220

Mine also came with the defaults set to Max Unit Power 100W

zvisha

hero member

Activity: 560

Merit: 500

SP20 settings blog post
http://www.spondoolies-tech.com/blogs/technical-blog/15747860-sp20

edgar

legendary

Activity: 1848

Merit: 1001

already updated before it became inaccessible.

just installing google remote now.

i sent you a skype request a few minutes ago

e2a - myminer does not seem to work at all now. i can see neither SPx

2nd edit - Much Thanks to Zvi, 15minutes and im at least stable now at 1.5TH/s

needed to up the max watts & fan speed (its quite warm here)

zvisha

hero member

Activity: 560

Merit: 500

Quote from: edgar on November 05, 2014, 02:19:14 AM

after swapping PSUs & PCI-e cables i now have one dead PSU and cannot access the rig at all.
BUT, myminer.io now sees it...

myminer.io never forgets.

zvisha

hero member

Activity: 560

Merit: 500

Quote from: edgar on November 05, 2014, 03:05:03 AM

Quote from: zvisha on November 05, 2014, 02:58:19 AM

Hi guys. The SP20 is shipped with initial limitation of 200W for the PSU. That is about 1.3Th. Most of you have good PSUs and will want to set it to maximum.
Settings->"Max PSU Power Unit X"->288 Watt.

actually mine arrived with 100 limit and a comment to 'up to 120'.

i did try that before it became in-accessible.

Strange.
Please update to latest SW version and connect me on Skype so we can resolve the issue.

zvisha

hero member

Activity: 560

Merit: 500

Quote from: edgar on November 05, 2014, 12:08:57 AM

CGMiner restarts every 5 minutes.

GH on the pool never gets above 249GH - usually sitting around 49GH

Is this 'punishment' or is everyone suffering equally?

E2A -

Asic stats

Uptime:18 | FPGA ver:100
-----BOARD-0----- PSU[UNKNOWN]: 0->168w[168 0 0] (->168w[168 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-1----- PSU[UNKNOWN]: 0->180w[180 0 0] (->180w[180 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-2----- PSU[UNKNOWN]: 0->183w[183 0 0] (->183w[183 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-3----- PSU[UNKNOWN]: 0->188w[188 0 0] (->188w[188 0 0]) (lim=100) 0c cooling:0/0x0

LOOP[0] ON 0: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 66W 98A 43c] ASIC:[ 85c (125c) 815hz(BL: 815) 1 (E:192) F:0] 1: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 62W 92A 47c] ASIC:[ 85c (125c) 780hz(BL: 780) 0 (E:193) F:0]

LOOP[1] ON 2: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 72W 107A 50c] ASIC:[ 85c (125c) 880hz(BL: 880) 0 (E:193) F:0] 3: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:749) 66W 98A 51c] ASIC:[ 85c (125c) 820hz(BL: 820) 1 (E:193) F:0]

LOOP[2] ON 4: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 73W 107A 44c] ASIC:[ 85c (125c) 870hz(BL: 870) 0 (E:193) F:0] 5: DC2DC/1/:[vlt1:669 vlt2:677(DCl:794 Tl:794 Ul:749) 68W 101A 48c] ASIC:[ 85c (125c) 835hz(BL: 835) 0 (E:193) F:0]

LOOP[3] ON 6: DC2DC/1/:[vlt1:675 vlt2:677(DCl:794 Tl:794 Ul:749) 76W 113A 50c] ASIC:[ 85c (125c) 915hz(BL: 915) 0 (E:193) F:0] 7: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:749) 68W 101A 51c] ASIC:[ 85c (125c) 835hz(BL: 835) 0 (E:192) F:0]

[H:HW:1302Gh,W:554,L:0,A:8,MMtmp:0 TMP:(33)=>=>=>(42,42)]
Pushed 28 jobs , in HW queue 4 jobs (sw:3, hw:3)!
min:14 wins:2[this/last min:2/0] bist-fail:24, hw-err:0
leading-zeroes:42 idle promils[s/m]:0/62, rate:0gh/s asic-count:8
Fan:80, conseq:179
AC2DC BAD: 0 0
R/NR: 7/0
RTF asics: 0
0 restarted 0 reset 0 reset2 0 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn 0 purge_queue3 0 bad_idle
Adapter queues: rsp=2, req=21
FET:
0:9 1:9

Hi.
I see you have limitation of 100W on each power domain, but you set your ASICs initial voltage to 677 - that already pulls 168Watt. Ether set higher power limit (and purchase stronger PSUs) - or set lowest possible start voltage - and maybe you will even have to disable 1 ASIC in each power domain.

edgar

legendary

Activity: 1848

Merit: 1001

Quote from: zvisha on November 05, 2014, 02:58:19 AM

Hi guys. The SP20 is shipped with initial limitation of 200W for the PSU. That is about 1.3Th. Most of you have good PSUs and will want to set it to maximum.
Settings->"Max PSU Power Unit X"->288 Watt.

actually mine arrived with 100 limit and a comment to 'up to 120'.

i did try that before it became in-accessible.

zvisha

hero member

Activity: 560

Merit: 500

Hi guys. The SP20 is shipped with initial limitation of 200W for the PSU. That is about 1.3Th. Most of you have good PSUs and will want to set it to maximum.
Settings->"Max PSU Power Unit X"->288 Watt.

edgar

legendary

Activity: 1848

Merit: 1001

Quote from: stan258 on November 05, 2014, 02:45:49 AM

Quote from: edgar on November 05, 2014, 02:19:14 AM

after swapping PSUs & PCI-e cables i now have one dead PSU and cannot access the rig at all.

BUT, myminer.io now sees it...

You might be pulling more watts then the PSUs can take on start up. After a few seconds as all electrical appliances they settle down. Coolmaster PSU is Bronze? Maybe very close to the 80%. Anyway it is almost 10 AM in Israel let’s see what they say.

it seems to be stuck in 'boot up' (fan/s on full and no yellow/green led)

Spondoolies is/are online...

zvisha

hero member

Activity: 560

Merit: 500

People that see problems with SP20 - please call me on Skype (zvi_shteingart) so I have a sample system too look at. My systems run 1.7, I need to see bad system to investigate.

stan258

sr. member

Activity: 440

Merit: 250

Quote from: edgar on November 05, 2014, 02:19:14 AM

after swapping PSUs & PCI-e cables i now have one dead PSU and cannot access the rig at all.

BUT, myminer.io now sees it...

You might be pulling more watts then the PSUs can take on start up. After a few seconds as all electrical appliances they settle down. Coolmaster PSU is Bronze? Maybe very close to the 80%. Anyway it is almost 10 AM in Israel let’s see what they say.

edgar

legendary

Activity: 1848

Merit: 1001

after swapping PSUs & PCI-e cables i now have one dead PSU and cannot access the rig at all.

BUT, myminer.io now sees it...

edgar

legendary

Activity: 1848

Merit: 1001

Quote from: stan258 on November 05, 2014, 12:42:05 AM

Anybody hit near 1.7TH with the SP20?

1.299 on the GUI

0.00 - on the pool...

it seems to submit a share or two at cgminer restart and then stalls out.....

Watchdog caught problem: soft handle

05/11 04:46:38:---- RUNNING SLOWSTART -----
05/11 04:46:39:Started!
05/11 04:46:50:consecutive_jobs > 0
05/11 04:46:50:consecutive_jobs = 0
05/11 04:46:50:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 04:53:40:Signal
spond-manager start
05/11 04:53:51:---- RUNNING SLOWSTART -----
05/11 04:53:51:Started!
05/11 04:54:04:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 04:59:49:Signal
spond-manager start
05/11 05:00:00:---- RUNNING SLOWSTART -----
05/11 05:00:00:Started!
05/11 05:00:12:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:06:00:Signal
spond-manager start
05/11 05:06:12:---- RUNNING SLOWSTART -----
05/11 05:06:12:Started!
05/11 05:06:24:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:12:09:Signal
spond-manager start
05/11 05:12:20:---- RUNNING SLOWSTART -----
05/11 05:12:21:Started!
05/11 05:12:31:consecutive_jobs > 0
05/11 05:12:31:consecutive_jobs = 0
05/11 05:12:32:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:18:21:Signal
spond-manager start
05/11 05:18:32:---- RUNNING SLOWSTART -----
05/11 05:18:32:Started!
05/11 05:18:44:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:24:29:Signal
spond-manager start
05/11 05:24:41:---- RUNNING SLOWSTART -----
05/11 05:24:41:Started!
05/11 05:24:53:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:30:41:Signal
spond-manager start
05/11 05:30:52:---- RUNNING SLOWSTART -----
05/11 05:30:53:Started!
05/11 05:31:04:consecutive_jobs > 0
05/11 05:31:04:consecutive_jobs = 0
05/11 05:31:05:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:36:50:Signal
spond-manager start
05/11 05:37:01:---- RUNNING SLOWSTART -----
05/11 05:37:01:Started!
05/11 05:37:13:consecutive_jobs > 0
05/11 05:37:13:consecutive_jobs = 0
05/11 05:37:13:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:43:01:Signal
spond-manager start
05/11 05:43:13:---- RUNNING SLOWSTART -----
05/11 05:43:13:Started!
05/11 05:43:25:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:49:10:Signal
spond-manager start
05/11 05:49:21:---- RUNNING SLOWSTART -----
05/11 05:49:21:Started!
05/11 05:49:33:consecutive_jobs > 0
05/11 05:49:33:consecutive_jobs = 0
05/11 05:49:34:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:55:22:Signal
spond-manager start
05/11 05:55:33:---- RUNNING SLOWSTART -----
05/11 05:55:33:Started!
05/11 05:55:45:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:01:30:Signal
spond-manager start
05/11 06:01:41:---- RUNNING SLOWSTART -----
05/11 06:01:42:Started!
05/11 06:01:53:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:07:42:Signal
spond-manager start
05/11 06:07:53:---- RUNNING SLOWSTART -----
05/11 06:07:54:Started!
05/11 06:08:06:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:13:51:Signal
spond-manager start
05/11 06:14:02:---- RUNNING SLOWSTART -----
05/11 06:14:02:Started!
05/11 06:14:14:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:20:02:Signal
spond-manager start
05/11 06:20:14:---- RUNNING SLOWSTART -----
05/11 06:20:14:Started!
05/11 06:20:26:consecutive_jobs > 0
05/11 06:20:26:consecutive_jobs = 0
05/11 06:20:26:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:26:11:Signal
spond-manager start
05/11 06:26:22:---- RUNNING SLOWSTART -----
05/11 06:26:23:Started!

stan258

sr. member

Activity: 440

Merit: 250

Anybody hit near 1.7TH with the SP20?

edgar

legendary

Activity: 1848

Merit: 1001

CGMiner restarts every 5 minutes.

GH on the pool never gets above 249GH - usually sitting around 49GH

Is this 'punishment' or is everyone suffering equally?

E2A -

Asic stats

Uptime:18 | FPGA ver:100
-----BOARD-0----- PSU[UNKNOWN]: 0->168w[168 0 0] (->168w[168 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-1----- PSU[UNKNOWN]: 0->180w[180 0 0] (->180w[180 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-2----- PSU[UNKNOWN]: 0->183w[183 0 0] (->183w[183 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-3----- PSU[UNKNOWN]: 0->188w[188 0 0] (->188w[188 0 0]) (lim=100) 0c cooling:0/0x0

LOOP[0] ON 0: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 66W 98A 43c] ASIC:[ 85c (125c) 815hz(BL: 815) 1 (E:192) F:0] 1: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 62W 92A 47c] ASIC:[ 85c (125c) 780hz(BL: 780) 0 (E:193) F:0]

LOOP[1] ON 2: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 72W 107A 50c] ASIC:[ 85c (125c) 880hz(BL: 880) 0 (E:193) F:0] 3: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:749) 66W 98A 51c] ASIC:[ 85c (125c) 820hz(BL: 820) 1 (E:193) F:0]

LOOP[2] ON 4: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 73W 107A 44c] ASIC:[ 85c (125c) 870hz(BL: 870) 0 (E:193) F:0] 5: DC2DC/1/:[vlt1:669 vlt2:677(DCl:794 Tl:794 Ul:749) 68W 101A 48c] ASIC:[ 85c (125c) 835hz(BL: 835) 0 (E:193) F:0]

LOOP[3] ON 6: DC2DC/1/:[vlt1:675 vlt2:677(DCl:794 Tl:794 Ul:749) 76W 113A 50c] ASIC:[ 85c (125c) 915hz(BL: 915) 0 (E:193) F:0] 7: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:749) 68W 101A 51c] ASIC:[ 85c (125c) 835hz(BL: 835) 0 (E:192) F:0]

[H:HW:1302Gh,W:554,L:0,A:8,MMtmp:0 TMP:(33)=>=>=>(42,42)]
Pushed 28 jobs , in HW queue 4 jobs (sw:3, hw:3)!
min:14 wins:2[this/last min:2/0] bist-fail:24, hw-err:0
leading-zeroes:42 idle promils[s/m]:0/62, rate:0gh/s asic-count:8
Fan:80, conseq:179
AC2DC BAD: 0 0
R/NR: 7/0
RTF asics: 0
0 restarted 0 reset 0 reset2 0 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn 0 purge_queue3 0 bad_idle
Adapter queues: rsp=2, req=21
FET:
0:9 1:9

Koontas

hero member

Activity: 784

Merit: 502

Quote from: edgar on November 04, 2014, 11:28:14 PM

Quote from: Koontas on November 04, 2014, 11:21:58 PM

Quote from: edgar on November 04, 2014, 10:55:16 PM

UI says 1293GH - BTCG says 94GH but then stops

Total shares in 90 minutes - 11

on rebooting UI changes IP despite switching off DHCP

updated to latest FW... no diff

UI also states BTCG pool is 'dead' while all other rigs are running on that pool...

E2A - using 2 x Cougar 750w PSUs linked with 'Add2PSU'

I am having the exact same issue and I've tried multiple pools.

Shutting down until there's a solution. Sad

what PSU are you using?

i sincerely doubt that is causing the lousy performance but would like to know anyway.

2 x 750w Coolermaster

edgar

legendary

Activity: 1848

Merit: 1001

Quote from: Koontas on November 04, 2014, 11:21:58 PM

Quote from: edgar on November 04, 2014, 10:55:16 PM

UI says 1293GH - BTCG says 94GH but then stops

Total shares in 90 minutes - 11

on rebooting UI changes IP despite switching off DHCP

updated to latest FW... no diff

UI also states BTCG pool is 'dead' while all other rigs are running on that pool...

E2A - using 2 x Cougar 750w PSUs linked with 'Add2PSU'

I am having the exact same issue and I've tried multiple pools.

Shutting down until there's a solution. Sad

what PSU are you using?

i sincerely doubt that is causing the lousy performance but would like to know anyway.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 310. (Read 1260290 times)