Anybody with a SP31 found a 'sweet spot', can't get more than 4.7THs out of mine.
I'm getting 4.84 on mine, settings:
Fan:80
Start Volts 0.655
Max Voltage: 0.79
Max PSU: 1330
Voltage is 202/200
Temperature: 22C-24C in / 72C, 72C out.
Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 313. (Read 1260290 times)
November 02, 2014, 05:46:15 PM
Anybody with a SP31 found a 'sweet spot', can't get more than 4.7THs out of mine.
I'm getting 4.84 on mine, settings:
Fan:80
Start Volts 0.655
Max Voltage: 0.79
Max PSU: 1330
Voltage is 202/200
Temperature: 22C-24C in / 72C, 72C out.
November 02, 2014, 05:03:53 PM
My SP20 is shipped.
Shipment Date Label printed Date: 31-10-2014
Shipment picked up Sunday, November 02, 2014 17:59 HAIFA - ISRAEL
However, is still waiting for an answer
Shipment picked up Sunday, November 02, 2014 17:59 HAIFA - ISRAEL
However, is still waiting for an answer
I ordered the SP20 (Order Date 09/09/2014) from 1,047.28 Euro and I'm still not paying for the order.
Can I pay from this order today and how much should be amount in euro?
Yesterday SP20 cost was 1,070.62 Euro with shipping.
Can I pay from this order today and how much should be amount in euro?
Yesterday SP20 cost was 1,070.62 Euro with shipping.
November 02, 2014, 04:02:11 PM
Anybody with a SP31 found a 'sweet spot', can't get more than 4.7THs out of mine.
November 02, 2014, 01:22:11 PM
Where can I download that version of FW? I wish you had links on your website for these updates as well. I'm not a "super" user which puts me at a bit of a disadvantage when trouble shooting my SP30. I've got the same issue with loop 12 ... I appreciate any help/guidance!
Go to Firmware Upgrade tab and press on Manual Selection then press ok and you can select from a list of FW versions. Be careful what you choose!
November 02, 2014, 01:02:17 PM
Where can I download that version of FW? I wish you had links on your website for these updates as well. I'm not a "super" user which puts me at a bit of a disadvantage when trouble shooting my SP30. I've got the same issue with loop 12 ... I appreciate any help/guidance!
November 02, 2014, 10:48:52 AM
Hi all.
Don't have much time to read the posts lately, you will need to catch me on skype if you need my attention.
I just released version 2.5.6, marked as experimental.
It has different behaviour regarding the BIST to reduce amount of noise caused by the latest batch of PSUs, so it's behaviour might differ.
It looks very good on the new PSUs, making the noise negligible, and it locks faster on optimal frequency.
If you have hash-rate under 4100 in 220V with all loops and under 3800 in 110V with all loops (for SP30), it might solve your problems.
I will be testing it tonight and make it official release tomorrow if all stable.
Regards`
Don't have much time to read the posts lately, you will need to catch me on skype if you need my attention.
I just released version 2.5.6, marked as experimental.
It has different behaviour regarding the BIST to reduce amount of noise caused by the latest batch of PSUs, so it's behaviour might differ.
It looks very good on the new PSUs, making the noise negligible, and it locks faster on optimal frequency.
If you have hash-rate under 4100 in 220V with all loops and under 3800 in 110V with all loops (for SP30), it might solve your problems.
I will be testing it tonight and make it official release tomorrow if all stable.
Regards`
November 02, 2014, 10:42:41 AM
Zvi,
What can I do/check to have this LOOP 9 communicate with the rest of the rig? It usually comes back after a number of reboots/restarts and then fails again when the mining process is restarted for whatever reasons might be (pool communications .. etc). Eventually .. it brings the whole bottom board down, the miner then hashing at about 2.2Gh/s.
I lowered the power limits below those set by the miner itself, with about 30W per power supply. I also limited the voltage from 660 to 708 to avoid ASIC overheating (i.e. above 115 degC). The firmware is 2.4.23.
What can I do/check to have this LOOP 9 communicate with the rest of the rig? It usually comes back after a number of reboots/restarts and then fails again when the mining process is restarted for whatever reasons might be (pool communications .. etc). Eventually .. it brings the whole bottom board down, the miner then hashing at about 2.2Gh/s.
I lowered the power limits below those set by the miner itself, with about 30W per power supply. I also limited the voltage from 660 to 708 to avoid ASIC overheating (i.e. above 115 degC). The firmware is 2.4.23.
Code:
Uptime:119 | FPGA ver:32
-----BOARD-0-----
PSU[EMERSON1200]: 1440->1280w[1276 1280 1276] (->1327w[1327 1327 1327]) (lim=1305) 0c cooling:0/0x0
-----BOARD-1-----
PSU[EMERSON1200]: 1200->1060w[1056 1060 1060] (->1099w[1099 1099 1099]) (lim=1270) 0c cooling:0/0x0
LOOP[0] ON
0: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 64W 93A 50c] ASIC:[ 85c 730hz(BL: 730) 249 (E:193) F:0]
1: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 67W 96A 51c] ASIC:[ 85c 745hz(BL: 745) 226 (E:191) F:0]
2: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 45c] ASIC:[ 85c 780hz(BL: 780) 210 (E:193) F:0]
LOOP[1] ON
3: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 65W 94A 51c] ASIC:[ 85c 740hz(BL: 740) 212 (E:192) F:0]
4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 63c] ASIC:[ 85c 785hz(BL: 785) 201 (E:193) F:0]
5: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 62W 88A 55c] ASIC:[ 85c 710hz(BL: 710) 166 (E:193) F:0]
LOOP[2] ON
6: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 66c] ASIC:[ 85c 785hz(BL: 785) 245 (E:193) F:0]
7: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 69c] ASIC:[ 85c 820hz(BL: 820) 222 (E:193) F:0]
8: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 53c] ASIC:[ 85c 795hz(BL: 795) 256 (E:193) F:0]
LOOP[3] ON
9: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 71W 102A 64c] ASIC:[105c 775hz(BL: 775) 246 (E:193) F:0]
10: DC2DC/1/:[vlt1:699 vlt2:701(DCl:794 Tl:794 Ul:706) 78W 112A 75c] ASIC:[105c 855hz(BL: 855) 234 (E:193) F:0]
11: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 67c] ASIC:[ 85c 770hz(BL: 770) 221 (E:193) F:0]
LOOP[4] ON
12: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 80c] ASIC:[105c 835hz(BL: 835) 220 (E:193) F:0]
13: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 99A 74c] ASIC:[110c 785hz(BL: 785) 221 (E:193) F:0]
14: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 60c] ASIC:[105c 815hz(BL: 815) 238 (E:193) F:0]
LOOP[5] ON
15: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 68W 97A 53c] ASIC:[ 85c 765hz(BL: 765) 197 (E:193) F:0]
16: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 102A 56c] ASIC:[ 85c 795hz(BL: 795) 207 (E:191) F:0]
17: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 48c] ASIC:[ 85c 790hz(BL: 790) 209 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 103A 58c] ASIC:[ 85c 805hz(BL: 805) 205 (E:193) F:0]
19: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 104A 69c] ASIC:[ 85c 815hz(BL: 815) 210 (E:193) F:0]
20: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 65c] ASIC:[ 85c 795hz(BL: 795) 244 (E:193) F:0]
LOOP[7] ON
21: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 76W 108A 78c] ASIC:[ 85c 835hz(BL: 835) 213 (E:193) F:0]
22: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 102A 76c] ASIC:[ 85c 810hz(BL: 810) 239 (E:193) F:0]
23: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 70W 100A 58c] ASIC:[ 85c 775hz(BL: 775) 204 (E:193) F:0]
LOOP[8] ON
24: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 74W 105A 68c] ASIC:[105c 815hz(BL: 815) 226 (E:193) F:0]
25: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 103A 79c] ASIC:[100c 815hz(BL: 815) 251 (E:193) F:0]
26: DC2DC/1/:[vlt1:675 vlt2:682(DCl:682 Tl:794 Ul:706) 72W 106A 76c] ASIC:[100c 820hz(BL: 820) 250 (E:190) F:0]
LOOP[9] ON
27: disabled (i2c good, no OC)
28: disabled (i2c good, no OC)
29: disabled (i2c good, no OC)
[H:HW:4122Gh,W:1918,L:0,A:27,MMtmp:0 TMP:(19)=>=>=>(66,48)]
Pushed 27 jobs , in HW queue 4 jobs (sw:1, hw:1)!
min:28 wins:6022[this/last min:106/265] bist-fail:461, hw-err:50
leading-zeroes:40 idle promils[s/m]:0/0, rate:4631gh/s asic-count:24
Fan:80, conseq:200
AC2DC BAD: 0 0
R/NR: 1588/0
RTF asics: 0
5 restarted 0 reset 0 reset2 3 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_oc 2 read_tmout2 5 read_crptn
0 purge_queue3 31 bad_idle
Adapter queues: rsp=3, req=19
-----BOARD-0-----
PSU[EMERSON1200]: 1440->1280w[1276 1280 1276] (->1327w[1327 1327 1327]) (lim=1305) 0c cooling:0/0x0
-----BOARD-1-----
PSU[EMERSON1200]: 1200->1060w[1056 1060 1060] (->1099w[1099 1099 1099]) (lim=1270) 0c cooling:0/0x0
LOOP[0] ON
0: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 64W 93A 50c] ASIC:[ 85c 730hz(BL: 730) 249 (E:193) F:0]
1: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 67W 96A 51c] ASIC:[ 85c 745hz(BL: 745) 226 (E:191) F:0]
2: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 45c] ASIC:[ 85c 780hz(BL: 780) 210 (E:193) F:0]
LOOP[1] ON
3: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 65W 94A 51c] ASIC:[ 85c 740hz(BL: 740) 212 (E:192) F:0]
4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 63c] ASIC:[ 85c 785hz(BL: 785) 201 (E:193) F:0]
5: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 62W 88A 55c] ASIC:[ 85c 710hz(BL: 710) 166 (E:193) F:0]
LOOP[2] ON
6: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 66c] ASIC:[ 85c 785hz(BL: 785) 245 (E:193) F:0]
7: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 69c] ASIC:[ 85c 820hz(BL: 820) 222 (E:193) F:0]
8: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 53c] ASIC:[ 85c 795hz(BL: 795) 256 (E:193) F:0]
LOOP[3] ON
9: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 71W 102A 64c] ASIC:[105c 775hz(BL: 775) 246 (E:193) F:0]
10: DC2DC/1/:[vlt1:699 vlt2:701(DCl:794 Tl:794 Ul:706) 78W 112A 75c] ASIC:[105c 855hz(BL: 855) 234 (E:193) F:0]
11: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 67c] ASIC:[ 85c 770hz(BL: 770) 221 (E:193) F:0]
LOOP[4] ON
12: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 80c] ASIC:[105c 835hz(BL: 835) 220 (E:193) F:0]
13: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 99A 74c] ASIC:[110c 785hz(BL: 785) 221 (E:193) F:0]
14: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 60c] ASIC:[105c 815hz(BL: 815) 238 (E:193) F:0]
LOOP[5] ON
15: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 68W 97A 53c] ASIC:[ 85c 765hz(BL: 765) 197 (E:193) F:0]
16: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 102A 56c] ASIC:[ 85c 795hz(BL: 795) 207 (E:191) F:0]
17: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 48c] ASIC:[ 85c 790hz(BL: 790) 209 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 103A 58c] ASIC:[ 85c 805hz(BL: 805) 205 (E:193) F:0]
19: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 104A 69c] ASIC:[ 85c 815hz(BL: 815) 210 (E:193) F:0]
20: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 65c] ASIC:[ 85c 795hz(BL: 795) 244 (E:193) F:0]
LOOP[7] ON
21: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 76W 108A 78c] ASIC:[ 85c 835hz(BL: 835) 213 (E:193) F:0]
22: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 102A 76c] ASIC:[ 85c 810hz(BL: 810) 239 (E:193) F:0]
23: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 70W 100A 58c] ASIC:[ 85c 775hz(BL: 775) 204 (E:193) F:0]
LOOP[8] ON
24: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 74W 105A 68c] ASIC:[105c 815hz(BL: 815) 226 (E:193) F:0]
25: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 103A 79c] ASIC:[100c 815hz(BL: 815) 251 (E:193) F:0]
26: DC2DC/1/:[vlt1:675 vlt2:682(DCl:682 Tl:794 Ul:706) 72W 106A 76c] ASIC:[100c 820hz(BL: 820) 250 (E:190) F:0]
LOOP[9] ON
27: disabled (i2c good, no OC)
28: disabled (i2c good, no OC)
29: disabled (i2c good, no OC)
[H:HW:4122Gh,W:1918,L:0,A:27,MMtmp:0 TMP:(19)=>=>=>(66,48)]
Pushed 27 jobs , in HW queue 4 jobs (sw:1, hw:1)!
min:28 wins:6022[this/last min:106/265] bist-fail:461, hw-err:50
leading-zeroes:40 idle promils[s/m]:0/0, rate:4631gh/s asic-count:24
Fan:80, conseq:200
AC2DC BAD: 0 0
R/NR: 1588/0
RTF asics: 0
5 restarted 0 reset 0 reset2 3 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_oc 2 read_tmout2 5 read_crptn
0 purge_queue3 31 bad_idle
Adapter queues: rsp=3, req=19
Please upgrade to latest version (2.5.6 experimental), but most probably it wont help.
It looks like it was damaged in shipping. Mark the whole loop as "removed" in "settings"->"asics".
Regards`
November 02, 2014, 10:27:53 AM
Zvi,
What can I do/check to have this LOOP 9 communicate with the rest of the rig? It usually comes back after a number of reboots/restarts and then fails again when the mining process is restarted for whatever reasons might be (pool communications .. etc). Eventually .. it brings the whole bottom board down, the miner then hashing at about 2.2Gh/s.
I lowered the power limits below those set by the miner itself, with about 30W per power supply. I also limited the voltage from 660 to 708 to avoid ASIC overheating (i.e. above 115 degC). The firmware is 2.4.23.
What can I do/check to have this LOOP 9 communicate with the rest of the rig? It usually comes back after a number of reboots/restarts and then fails again when the mining process is restarted for whatever reasons might be (pool communications .. etc). Eventually .. it brings the whole bottom board down, the miner then hashing at about 2.2Gh/s.
I lowered the power limits below those set by the miner itself, with about 30W per power supply. I also limited the voltage from 660 to 708 to avoid ASIC overheating (i.e. above 115 degC). The firmware is 2.4.23.
Code:
Uptime:119 | FPGA ver:32
-----BOARD-0-----
PSU[EMERSON1200]: 1440->1280w[1276 1280 1276] (->1327w[1327 1327 1327]) (lim=1305) 0c cooling:0/0x0
-----BOARD-1-----
PSU[EMERSON1200]: 1200->1060w[1056 1060 1060] (->1099w[1099 1099 1099]) (lim=1270) 0c cooling:0/0x0
LOOP[0] ON
0: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 64W 93A 50c] ASIC:[ 85c 730hz(BL: 730) 249 (E:193) F:0]
1: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 67W 96A 51c] ASIC:[ 85c 745hz(BL: 745) 226 (E:191) F:0]
2: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 45c] ASIC:[ 85c 780hz(BL: 780) 210 (E:193) F:0]
LOOP[1] ON
3: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 65W 94A 51c] ASIC:[ 85c 740hz(BL: 740) 212 (E:192) F:0]
4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 63c] ASIC:[ 85c 785hz(BL: 785) 201 (E:193) F:0]
5: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 62W 88A 55c] ASIC:[ 85c 710hz(BL: 710) 166 (E:193) F:0]
LOOP[2] ON
6: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 66c] ASIC:[ 85c 785hz(BL: 785) 245 (E:193) F:0]
7: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 69c] ASIC:[ 85c 820hz(BL: 820) 222 (E:193) F:0]
8: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 53c] ASIC:[ 85c 795hz(BL: 795) 256 (E:193) F:0]
LOOP[3] ON
9: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 71W 102A 64c] ASIC:[105c 775hz(BL: 775) 246 (E:193) F:0]
10: DC2DC/1/:[vlt1:699 vlt2:701(DCl:794 Tl:794 Ul:706) 78W 112A 75c] ASIC:[105c 855hz(BL: 855) 234 (E:193) F:0]
11: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 67c] ASIC:[ 85c 770hz(BL: 770) 221 (E:193) F:0]
LOOP[4] ON
12: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 80c] ASIC:[105c 835hz(BL: 835) 220 (E:193) F:0]
13: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 99A 74c] ASIC:[110c 785hz(BL: 785) 221 (E:193) F:0]
14: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 60c] ASIC:[105c 815hz(BL: 815) 238 (E:193) F:0]
LOOP[5] ON
15: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 68W 97A 53c] ASIC:[ 85c 765hz(BL: 765) 197 (E:193) F:0]
16: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 102A 56c] ASIC:[ 85c 795hz(BL: 795) 207 (E:191) F:0]
17: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 48c] ASIC:[ 85c 790hz(BL: 790) 209 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 103A 58c] ASIC:[ 85c 805hz(BL: 805) 205 (E:193) F:0]
19: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 104A 69c] ASIC:[ 85c 815hz(BL: 815) 210 (E:193) F:0]
20: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 65c] ASIC:[ 85c 795hz(BL: 795) 244 (E:193) F:0]
LOOP[7] ON
21: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 76W 108A 78c] ASIC:[ 85c 835hz(BL: 835) 213 (E:193) F:0]
22: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 102A 76c] ASIC:[ 85c 810hz(BL: 810) 239 (E:193) F:0]
23: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 70W 100A 58c] ASIC:[ 85c 775hz(BL: 775) 204 (E:193) F:0]
LOOP[8] ON
24: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 74W 105A 68c] ASIC:[105c 815hz(BL: 815) 226 (E:193) F:0]
25: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 103A 79c] ASIC:[100c 815hz(BL: 815) 251 (E:193) F:0]
26: DC2DC/1/:[vlt1:675 vlt2:682(DCl:682 Tl:794 Ul:706) 72W 106A 76c] ASIC:[100c 820hz(BL: 820) 250 (E:190) F:0]
LOOP[9] ON
27: disabled (i2c good, no OC)
28: disabled (i2c good, no OC)
29: disabled (i2c good, no OC)
[H:HW:4122Gh,W:1918,L:0,A:27,MMtmp:0 TMP:(19)=>=>=>(66,48)]
Pushed 27 jobs , in HW queue 4 jobs (sw:1, hw:1)!
min:28 wins:6022[this/last min:106/265] bist-fail:461, hw-err:50
leading-zeroes:40 idle promils[s/m]:0/0, rate:4631gh/s asic-count:24
Fan:80, conseq:200
AC2DC BAD: 0 0
R/NR: 1588/0
RTF asics: 0
5 restarted 0 reset 0 reset2 3 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_oc 2 read_tmout2 5 read_crptn
0 purge_queue3 31 bad_idle
Adapter queues: rsp=3, req=19
-----BOARD-0-----
PSU[EMERSON1200]: 1440->1280w[1276 1280 1276] (->1327w[1327 1327 1327]) (lim=1305) 0c cooling:0/0x0
-----BOARD-1-----
PSU[EMERSON1200]: 1200->1060w[1056 1060 1060] (->1099w[1099 1099 1099]) (lim=1270) 0c cooling:0/0x0
LOOP[0] ON
0: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 64W 93A 50c] ASIC:[ 85c 730hz(BL: 730) 249 (E:193) F:0]
1: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 67W 96A 51c] ASIC:[ 85c 745hz(BL: 745) 226 (E:191) F:0]
2: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 45c] ASIC:[ 85c 780hz(BL: 780) 210 (E:193) F:0]
LOOP[1] ON
3: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 65W 94A 51c] ASIC:[ 85c 740hz(BL: 740) 212 (E:192) F:0]
4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 63c] ASIC:[ 85c 785hz(BL: 785) 201 (E:193) F:0]
5: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 62W 88A 55c] ASIC:[ 85c 710hz(BL: 710) 166 (E:193) F:0]
LOOP[2] ON
6: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 66c] ASIC:[ 85c 785hz(BL: 785) 245 (E:193) F:0]
7: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 69c] ASIC:[ 85c 820hz(BL: 820) 222 (E:193) F:0]
8: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 53c] ASIC:[ 85c 795hz(BL: 795) 256 (E:193) F:0]
LOOP[3] ON
9: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 71W 102A 64c] ASIC:[105c 775hz(BL: 775) 246 (E:193) F:0]
10: DC2DC/1/:[vlt1:699 vlt2:701(DCl:794 Tl:794 Ul:706) 78W 112A 75c] ASIC:[105c 855hz(BL: 855) 234 (E:193) F:0]
11: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 67c] ASIC:[ 85c 770hz(BL: 770) 221 (E:193) F:0]
LOOP[4] ON
12: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 80c] ASIC:[105c 835hz(BL: 835) 220 (E:193) F:0]
13: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 99A 74c] ASIC:[110c 785hz(BL: 785) 221 (E:193) F:0]
14: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 60c] ASIC:[105c 815hz(BL: 815) 238 (E:193) F:0]
LOOP[5] ON
15: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 68W 97A 53c] ASIC:[ 85c 765hz(BL: 765) 197 (E:193) F:0]
16: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 102A 56c] ASIC:[ 85c 795hz(BL: 795) 207 (E:191) F:0]
17: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 48c] ASIC:[ 85c 790hz(BL: 790) 209 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 103A 58c] ASIC:[ 85c 805hz(BL: 805) 205 (E:193) F:0]
19: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 104A 69c] ASIC:[ 85c 815hz(BL: 815) 210 (E:193) F:0]
20: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 65c] ASIC:[ 85c 795hz(BL: 795) 244 (E:193) F:0]
LOOP[7] ON
21: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 76W 108A 78c] ASIC:[ 85c 835hz(BL: 835) 213 (E:193) F:0]
22: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 102A 76c] ASIC:[ 85c 810hz(BL: 810) 239 (E:193) F:0]
23: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 70W 100A 58c] ASIC:[ 85c 775hz(BL: 775) 204 (E:193) F:0]
LOOP[8] ON
24: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 74W 105A 68c] ASIC:[105c 815hz(BL: 815) 226 (E:193) F:0]
25: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 103A 79c] ASIC:[100c 815hz(BL: 815) 251 (E:193) F:0]
26: DC2DC/1/:[vlt1:675 vlt2:682(DCl:682 Tl:794 Ul:706) 72W 106A 76c] ASIC:[100c 820hz(BL: 820) 250 (E:190) F:0]
LOOP[9] ON
27: disabled (i2c good, no OC)
28: disabled (i2c good, no OC)
29: disabled (i2c good, no OC)
[H:HW:4122Gh,W:1918,L:0,A:27,MMtmp:0 TMP:(19)=>=>=>(66,48)]
Pushed 27 jobs , in HW queue 4 jobs (sw:1, hw:1)!
min:28 wins:6022[this/last min:106/265] bist-fail:461, hw-err:50
leading-zeroes:40 idle promils[s/m]:0/0, rate:4631gh/s asic-count:24
Fan:80, conseq:200
AC2DC BAD: 0 0
R/NR: 1588/0
RTF asics: 0
5 restarted 0 reset 0 reset2 3 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_oc 2 read_tmout2 5 read_crptn
0 purge_queue3 31 bad_idle
Adapter queues: rsp=3, req=19
November 02, 2014, 09:17:56 AM
I ordered the SP20 (Order Date 09/09/2014) from 1,047.28 Euro and I'm still not paying for the order.
Can I pay from this order today and how much should be amount in euro?
Yesterday SP20 cost was 1,070.62 Euro with shipping.
Can I pay from this order today and how much should be amount in euro?
Yesterday SP20 cost was 1,070.62 Euro with shipping.
November 01, 2014, 03:16:57 AM
You mean about the fact that 3 days prior to their shipping deadline they had no clue if they could ship or not? ...
We're working through the weekend to meet the October shipping deadline.The reasons for the last minute shipping are numerous and has also very much to do with unauthorized strikes in Israel sea ports, see for example here.
It happens also in previous months, we had to ask the carrier to change route, deliver to cypress and fly the parts into Israel.
We're going through hoops to make sure the entire material needed for production arrives on time. It's an enormous, challenging task.
Right now we're producing the SP20 and we'll ship them after the proper burn-in tests in Flextronics. It might be slipped to the beginning of next week. If this will be the case, we'll compensate.
Guy
The production of the SP20 is slipping into the beginning of the next week. We are working hard to make sure all units are shipped by Monday.
We will offer a BTC compensation for lost mining time.
Compensation and ship all SP20s by Monday.
First real slip in timeline we've seen. But with compensation I suspect customers will be happy at least in that regard. How long for compensation?
November 01, 2014, 03:11:02 AM
You mean about the fact that 3 days prior to their shipping deadline they had no clue if they could ship or not? ...
We're working through the weekend to meet the October shipping deadline.The reasons for the last minute shipping are numerous and has also very much to do with unauthorized strikes in Israel sea ports, see for example here.
It happens also in previous months, we had to ask the carrier to change route, deliver to cypress and fly the parts into Israel.
We're going through hoops to make sure the entire material needed for production arrives on time. It's an enormous, challenging task.
Right now we're producing the SP20 and we'll ship them after the proper burn-in tests in Flextronics. It might be slipped to the beginning of next week. If this will be the case, we'll compensate.
Guy
The production of the SP20 is slipping into the beginning of the next week. We are working hard to make sure all units are shipped by Monday.
We will offer a BTC compensation for lost mining time.
Compensation and ship all SP20s by Monday.
First real slip in timeline we've seen. But with compensation I suspect customers will be happy at least in that regard. How long for compensation?
November 01, 2014, 03:08:44 AM
so the sp20 is now officially delayed.
unforeseeable until today??
unforeseeable until today??
October 31, 2014, 07:57:01 PM
If your miner experiences instability with Murata PSU not related to any specific loop or ASIC (looks like periodic hash-rate dropping to ~3Th with some timeout notifications): please try updating to 2.5.4. it knows how to handle the PSU behaviour better. It should help you. If this fix helps you/doesn't help you - let me know.
Regards`
Regards`
October 31, 2014, 06:09:08 PM
My SP31 is out for delivery, and it just shipped 1.5 days ago, that's pretty fast!
I have ordered every Spondoolies-Tech Product that they has shipped so far, and every order has arrived within the time frame promised. Customer service has been excellent!
I will continue to be a customer on future products, their pre-sales and post-sales customer service and honesty cannot be touched, and their products are rock solid.
Thanks Spondoolies-Tech team, keep up the great work! Looking forward to hearing more about the next-gen!!
I have ordered every Spondoolies-Tech Product that they has shipped so far, and every order has arrived within the time frame promised. Customer service has been excellent!
I will continue to be a customer on future products, their pre-sales and post-sales customer service and honesty cannot be touched, and their products are rock solid.
Thanks Spondoolies-Tech team, keep up the great work! Looking forward to hearing more about the next-gen!!
when did you order?
October 31, 2014, 11:20:48 AM
My SP31 is out for delivery, and it just shipped 1.5 days ago, that's pretty fast!
I have ordered every Spondoolies-Tech Product that they has shipped so far, and every order has arrived within the time frame promised. Customer service has been excellent!
I will continue to be a customer on future products, their pre-sales and post-sales customer service and honesty cannot be touched, and their products are rock solid.
Thanks Spondoolies-Tech team, keep up the great work! Looking forward to hearing more about the next-gen!!
I have ordered every Spondoolies-Tech Product that they has shipped so far, and every order has arrived within the time frame promised. Customer service has been excellent!
I will continue to be a customer on future products, their pre-sales and post-sales customer service and honesty cannot be touched, and their products are rock solid.
Thanks Spondoolies-Tech team, keep up the great work! Looking forward to hearing more about the next-gen!!
October 31, 2014, 11:03:24 AM
24 hours left...will the SP20 tracking number be received? I'd bet NO.
We are still working hard to ship out all the SP20s by tomorrow and will continue to update you.
You are one angry miner...think it was reference to the fact that spondoolies just promised that they will likely ship out all the SP20 orders by the end of the month - 1 hour before you said you dont beleive them
Time will tell, eh?
When you're right, you're right. Looks like Spondoolies isn't shipping by the end of the month. I'm shocked.
October 31, 2014, 10:36:15 AM
Received my first SP31s as well today. Shit that was fast.
October 31, 2014, 08:32:55 AM
You mean about the fact that 3 days prior to their shipping deadline they had no clue if they could ship or not? ...
We're working through the weekend to meet the October shipping deadline.The reasons for the last minute shipping are numerous and has also very much to do with unauthorized strikes in Israel sea ports, see for example here.
It happens also in previous months, we had to ask the carrier to change route, deliver to cypress and fly the parts into Israel.
We're going through hoops to make sure the entire material needed for production arrives on time. It's an enormous, challenging task.
Right now we're producing the SP20 and we'll ship them after the proper burn-in tests in Flextronics. It might be slipped to the beginning of next week. If this will be the case, we'll compensate.
Guy
The production of the SP20 is slipping into the beginning of the next week. We are working hard to make sure all units are shipped by Monday.
We will offer a BTC compensation for lost mining time.
October 31, 2014, 07:34:53 AM
SP31 sent yesterday, SP31 received today by Advania! Thank you!
October 31, 2014, 06:20:53 AM
Thank you. Going to give it some thought, BTC's low price being the only thing that makes me hesitate. That SP35 would be nice. 
yeah i agree these guys have been good to me (gave me a refund even thou technically
they did not need to do so at least legally)
feel I owe them a product ...just at 15c/kwh and hosting fees can't get the numbers to work at these btc prices (or the prev units not really good for my home use)
well maybe the next lot then ... another.generation or some such I can figure out at least how to kinda float a miner from them.....the NO pre-order plan is helpful
on me jumping the shark on this....pretty much no more pre-orders of asic equip for me (no refund no roi Titan)
Searing
15c/kwh alone virtually prices you out of the mining game - hosting fees atop that must hurt. I pay $0.15/kwh but have free hosting in the back of a small business, and I still can't justify most current hardware.
@SP - will there be a price break in the SP20 soon? at $700/TH at 0.7w/GH its almost twice as expensive as antminer S3 units. I understand its much smaller and the software platform is much better, but that really prices it out of the market for most home users.
Jump to: