[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 311.

Koontas

hero member

Activity: 784

Merit: 502

Quote from: edgar on November 04, 2014, 10:55:16 PM

UI says 1293GH - BTCG says 94GH but then stops

Total shares in 90 minutes - 11

on rebooting UI changes IP despite switching off DHCP

updated to latest FW... no diff

UI also states BTCG pool is 'dead' while all other rigs are running on that pool...

E2A - using 2 x Cougar 750w PSUs linked with 'Add2PSU'

I am having the exact same issue and I've tried multiple pools.

Shutting down until there's a solution. Sad

edgar

legendary

Activity: 1848

Merit: 1001

Asia.

Return to factory default settings didnt help much, except BTCG is now shown as 'alive'

Mining is still minimal & sporadic

stan258

sr. member

Activity: 440

Merit: 250

Quote from: edgar on November 04, 2014, 10:55:16 PM

SP20 arrived - 100USD in fees

Myminer.io doesnt see it - Found it with Adv. IP scanner

CGMiner stops running every minute or two

Changed DNS to 8.8.8.8 and 192.168.1.1 - reverts to "#Your static network configuration"

UI says 1293GH - BTCG says 94GH but then stops

Total shares in 90 minutes - 11

on rebooting UI changes IP despite switching off DHCP

updated to latest FW... no diff

UI also states BTCG pool is 'dead' while all other rigs are running on that pool...

E2A - using 2 x Cougar 750w PSUs linked with 'Add2PSU'

Are you in the United States? Normally zero import fees on technology. I hope this is not going to be common with the entire batch. RMA back and forth is going to cost alot in shipping.

edgar

legendary

Activity: 1848

Merit: 1001

SP20 arrived - 100USD in fees

Myminer.io doesnt see it - Found it with Adv. IP scanner

CGMiner stops running every minute or two

Changed DNS to 8.8.8.8 and 192.168.1.1 - reverts to "#Your static network configuration"

UI says 1293GH - BTCG says 94GH but then stops

Total shares in 90 minutes - 11

on rebooting UI changes IP despite switching off DHCP

updated to latest FW... no diff

UI also states BTCG pool is 'dead' while all other rigs are running on that pool...

E2A - using 2 x Cougar 750w PSUs linked with 'Add2PSU'

wh00per

hero member

Activity: 572

Merit: 500

Quote from: zvisha on November 02, 2014, 10:42:41 AM

Quote from: wh00per on November 02, 2014, 10:27:53 AM

Zvi,

What can I do/check to have this LOOP 9 communicate with the rest of the rig? It usually comes back after a number of reboots/restarts and then fails again when the mining process is restarted for whatever reasons might be (pool communications .. etc). Eventually .. it brings the whole bottom board down, the miner then hashing at about 2.2Gh/s.

I lowered the power limits below those set by the miner itself, with about 30W per power supply. I also limited the voltage from 660 to 708 to avoid ASIC overheating (i.e. above 115 degC). The firmware is 2.4.23.

Code:

Uptime:119 | FPGA ver:32
-----BOARD-0-----
PSU[EMERSON1200]: 1440->1280w[1276 1280 1276] (->1327w[1327 1327 1327]) (lim=1305) 0c cooling:0/0x0
-----BOARD-1-----
PSU[EMERSON1200]: 1200->1060w[1056 1060 1060] (->1099w[1099 1099 1099]) (lim=1270) 0c cooling:0/0x0
LOOP[0] ON
0: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 64W 93A 50c] ASIC:[ 85c 730hz(BL: 730) 249 (E:193) F:0]
1: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 67W 96A 51c] ASIC:[ 85c 745hz(BL: 745) 226 (E:191) F:0]
2: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 45c] ASIC:[ 85c 780hz(BL: 780) 210 (E:193) F:0]
LOOP[1] ON
3: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 65W 94A 51c] ASIC:[ 85c 740hz(BL: 740) 212 (E:192) F:0]
4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 63c] ASIC:[ 85c 785hz(BL: 785) 201 (E:193) F:0]
5: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 62W 88A 55c] ASIC:[ 85c 710hz(BL: 710) 166 (E:193) F:0]
LOOP[2] ON
6: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 66c] ASIC:[ 85c 785hz(BL: 785) 245 (E:193) F:0]
7: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 69c] ASIC:[ 85c 820hz(BL: 820) 222 (E:193) F:0]
8: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 53c] ASIC:[ 85c 795hz(BL: 795) 256 (E:193) F:0]
LOOP[3] ON
9: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 71W 102A 64c] ASIC:[105c 775hz(BL: 775) 246 (E:193) F:0]
10: DC2DC/1/:[vlt1:699 vlt2:701(DCl:794 Tl:794 Ul:706) 78W 112A 75c] ASIC:[105c 855hz(BL: 855) 234 (E:193) F:0]
11: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 67c] ASIC:[ 85c 770hz(BL: 770) 221 (E:193) F:0]
LOOP[4] ON
12: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 80c] ASIC:[105c 835hz(BL: 835) 220 (E:193) F:0]
13: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 99A 74c] ASIC:[110c 785hz(BL: 785) 221 (E:193) F:0]
14: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 60c] ASIC:[105c 815hz(BL: 815) 238 (E:193) F:0]
LOOP[5] ON
15: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 68W 97A 53c] ASIC:[ 85c 765hz(BL: 765) 197 (E:193) F:0]
16: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 102A 56c] ASIC:[ 85c 795hz(BL: 795) 207 (E:191) F:0]
17: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 48c] ASIC:[ 85c 790hz(BL: 790) 209 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 103A 58c] ASIC:[ 85c 805hz(BL: 805) 205 (E:193) F:0]
19: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 104A 69c] ASIC:[ 85c 815hz(BL: 815) 210 (E:193) F:0]
20: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 65c] ASIC:[ 85c 795hz(BL: 795) 244 (E:193) F:0]
LOOP[7] ON
21: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 76W 108A 78c] ASIC:[ 85c 835hz(BL: 835) 213 (E:193) F:0]
22: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 102A 76c] ASIC:[ 85c 810hz(BL: 810) 239 (E:193) F:0]
23: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 70W 100A 58c] ASIC:[ 85c 775hz(BL: 775) 204 (E:193) F:0]
LOOP[8] ON
24: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 74W 105A 68c] ASIC:[105c 815hz(BL: 815) 226 (E:193) F:0]
25: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 103A 79c] ASIC:[100c 815hz(BL: 815) 251 (E:193) F:0]
26: DC2DC/1/:[vlt1:675 vlt2:682(DCl:682 Tl:794 Ul:706) 72W 106A 76c] ASIC:[100c 820hz(BL: 820) 250 (E:190) F:0]
LOOP[9] ON
27: disabled (i2c good, no OC)
28: disabled (i2c good, no OC)
29: disabled (i2c good, no OC)

[H:HW:4122Gh,W:1918,L:0,A:27,MMtmp:0 TMP:(19)=>=>=>(66,48)]
Pushed 27 jobs , in HW queue 4 jobs (sw:1, hw:1)!
min:28 wins:6022[this/last min:106/265] bist-fail:461, hw-err:50
leading-zeroes:40 idle promils[s/m]:0/0, rate:4631gh/s asic-count:24
Fan:80, conseq:200
AC2DC BAD: 0 0
R/NR: 1588/0
RTF asics: 0
5 restarted 0 reset 0 reset2 3 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_oc 2 read_tmout2 5 read_crptn
0 purge_queue3 31 bad_idle
Adapter queues: rsp=3, req=19

Please upgrade to latest version (2.5.6 experimental), but most probably it wont help.
It looks like it was damaged in shipping. Mark the whole loop as "removed" in "settings"->"asics".

Regards`

Hi Zvi.

The update to 2.5.6 helped. I've seen that the PSU power is now limited at 1250 .. anything above it entered in the UI does not reflect in miner-gate config files after restart, when the unit restarts with 1250 no matter what you have in the UI. At least this is how it works here Grin

6h+ uptime now with no events. Before the upgrade, I had to restart the miner-gate and/or reboot the unit every 2h.

Code:

Uptime:24371 | FPGA ver:62
-----BOARD-0-----
PSU[EMERSON1200]: 1376->1248w[1248 1244 1248] (->1279w[1279 1279 1279]) (lim=1250) 0c cooling:0/0x0
-----BOARD-1-----
PSU[EMERSON1200]: 1392->1248w[1244 1248 1248] (->1268w[1268 1268 1268]) (lim=1249) 0c cooling:0/0x0
LOOP[0] ON
0: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 61W 88A 54c] ASIC:[ 85c (120c) 710hz(BL: 710) 3012 (E:193) F:0]
1: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 63W 91A 55c] ASIC:[ 85c (120c) 715hz(BL: 715) 3044 (E:191) F:0]
2: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 49c] ASIC:[ 85c (120c) 770hz(BL: 770) 3271 (E:193) F:0]
LOOP[1] ON
3: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 64W 93A 56c] ASIC:[ 85c (120c) 735hz(BL: 735) 3098 (E:192) F:0]
4: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 66W 96A 67c] ASIC:[ 85c (120c) 770hz(BL: 770) 3256 (E:193) F:0]
5: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 61W 88A 60c] ASIC:[ 85c (120c) 700hz(BL: 700) 2729 (E:193) F:0]
LOOP[2] ON
6: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 65W 94A 69c] ASIC:[ 85c (120c) 755hz(BL: 755) 3178 (E:193) F:0]
7: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 71W 103A 73c] ASIC:[ 95c (120c) 800hz(BL: 800) 3484 (E:193) F:0]
8: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 99A 56c] ASIC:[ 85c (120c) 770hz(BL: 770) 3264 (E:193) F:0]
LOOP[3] ON
9: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 98A 68c] ASIC:[105c (120c) 755hz(BL: 755) 3288 (E:193) F:0]
10: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 74W 108A 79c] ASIC:[110c (120c) 830hz(BL: 830) 3496 (E:193) F:0]
11: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 66W 96A 72c] ASIC:[ 85c (120c) 760hz(BL: 760) 3138 (E:193) F:0]
LOOP[4] ON
12: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 73W 105A 86c] ASIC:[110c (120c) 840hz(BL: 840) 3362 (E:193) F:0]
13: DC2DC/1/:[vlt1:691 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 96A 80c] ASIC:[115c (120c) 775hz(BL: 775) 3204 (E:193) F:0]
14: DC2DC/1/:[vlt1:691 vlt2:695(DCl:794 Tl:794 Ul:714) 71W 102A 66c] ASIC:[110c (120c) 815hz(BL: 815) 3432 (E:193) F:0]
LOOP[5] ON
15: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 60W 87A 55c] ASIC:[ 85c (120c) 695hz(BL: 695) 2895 (E:193) F:0]
16: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 59c] ASIC:[ 85c (120c) 770hz(BL: 770) 3142 (E:191) F:0]
17: DC2DC/1/:[vlt1:689 vlt2:690(DCl:794 Tl:794 Ul:714) 62W 91A 48c] ASIC:[ 85c (120c) 725hz(BL: 725) 3052 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:689 vlt2:690(DCl:794 Tl:794 Ul:714) 66W 96A 59c] ASIC:[ 85c (120c) 765hz(BL: 765) 3264 (E:193) F:0]
19: DC2DC/1/:[vlt1:685 vlt2:690(DCl:794 Tl:794 Ul:714) 66W 96A 70c] ASIC:[ 85c (120c) 770hz(BL: 770) 3099 (E:193) F:0]
20: DC2DC/1/:[vlt1:687 vlt2:690(DCl:794 Tl:794 Ul:714) 65W 95A 66c] ASIC:[ 85c (120c) 760hz(BL: 760) 3207 (E:193) F:0]
LOOP[7] ON
21: DC2DC/1/:[vlt1:685 vlt2:690(DCl:794 Tl:794 Ul:714) 69W 101A 78c] ASIC:[ 85c (120c) 790hz(BL: 790) 3374 (E:193) F:0]
22: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 66W 95A 77c] ASIC:[ 85c (120c) 770hz(BL: 770) 3102 (E:193) F:0]
23: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 64W 93A 60c] ASIC:[ 85c (120c) 730hz(BL: 730) 2972 (E:193) F:0]
LOOP[8] ON
24: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 69c] ASIC:[105c (120c) 770hz(BL: 770) 3220 (E:193) F:0]
25: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 82c] ASIC:[100c (120c) 780hz(BL: 780) 3330 (E:193) F:0]
26: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 80W 115A 86c] ASIC:[110c (120c) 875hz(BL: 875) 3752 (E:193) F:0]
LOOP[9] ON
27: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 99A 85c] ASIC:[105c (120c) 770hz(BL: 770) 3204 (E:189) F:0]
28: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 60W 86A 80c] ASIC:[105c (120c) 685hz(BL: 685) 2914 (E:193) F:0]
29: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 99A 71c] ASIC:[110c (120c) 780hz(BL: 780) 3351 (E:193) F:0]

[H:HW:4426Gh,W:2015,L:0,A:30,MMtmp:0 TMP:(23)=>=>=>(72,72)]
Pushed 28 jobs , in HW queue 4 jobs (sw:1, hw:1)!
min:48 wins:96134[this/last min:172/226] bist-fail:151, hw-err:513
leading-zeroes:40 idle promils[s/m]:0/0, rate:3949gh/s asic-count:30
Fan:80, conseq:200
AC2DC BAD: 0 0
R/NR: 23852/0
RTF asics: 0
0 restarted 0 reset 0 reset2 0 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_i2c 1 read_tmout2 3 read_crptn
0 purge_queue3 0 bad_idle
Adapter queues: rsp=3, req=19

Many thanks.

wh00per

hero member

Activity: 572

Merit: 500

what kind of power supply are you using? please post link to the manufacturer or newegg/tigerdirect sites

then, log into the unit and post here the contents of your ASIC stats page.

Koontas

hero member

Activity: 784

Merit: 502

Quote from: wh00per on November 04, 2014, 09:11:35 PM

Quote from: Koontas on November 04, 2014, 09:06:23 PM

Alright, well, I got my SP20 rig today and I've got to admit, it's pretty nice. I take back MOST of the stuff I said about Spondoolies. Wink

Now tell me, what's the trick to getting it over 1310 gh/s?

buy 2 rigs Grin

Well, that's disappointing considering the site still says 1.7th/s +/- 10%

wh00per

hero member

Activity: 572

Merit: 500

Quote from: Koontas on November 04, 2014, 09:06:23 PM

Alright, well, I got my SP20 rig today and I've got to admit, it's pretty nice. I take back MOST of the stuff I said about Spondoolies. Wink

Now tell me, what's the trick to getting it over 1310 gh/s?

buy 2 rigs Grin

Koontas

hero member

Activity: 784

Merit: 502

Alright, well, I got my SP20 rig today and I've got to admit, it's pretty nice. I take back MOST of the stuff I said about Spondoolies. Wink

Now tell me, what's the trick to getting it over 1310 gh/s?

nhminer

sr. member

Activity: 473

Merit: 250

Quote from: zvisha on November 04, 2014, 05:28:19 PM

Quote from: nhminer on November 04, 2014, 02:13:35 PM

SP20 arrived today; up and mining in 30 minutes

However, ASIC stats shows:
LOOP[3] OFF (test serial failed or something)
6: disabled (i2c good, no OC)
7: disabled (i2c good, no OC)

Should I be concerned?

~nh

PS -- email sent to support, but I'm looking for collective wisdom here...

Yes.
The unit didn't manage to make the 2 ASICs work. That is 25% of it's ASICs, so that has big impact. Both ASICs 6 and 7 sit on same PSU.
Try to switch PSU between boards to see if the problem in board or PSU.

Switched PSUs, same results

~nh

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: eleahcim on November 04, 2014, 05:38:09 PM

Temp Front / Back T,B
36 °C / 86,89 °C
Socket Voltage
240/240 volt
Fan Speed
70

Put fans on 90. That's a hot room!

eleahcim

newbie

Activity: 5

Merit: 0

SP31 received today. Thanks Spondoolies!!!!!

Upgraded FW to 2.5.6

Mining Rate: 4752.63Ghs

I am going to let it sit for a while and burn-in. It had a little odd behavior after the FW upgrade with one of the PSU's going offline and the mining rate cut in half. I pulled plugs and reset and the unit came back up and I had to start the miner manually. It's been running fine so far.

Temp Front / Back T,B
36 °C / 86,89 °C
Socket Voltage
240/240 volt
Fan Speed
70
Start Voltage
0.655 / 0.655
Max Voltage
0.75
Max Watts
1330 / 1330

zvisha

hero member

Activity: 560

Merit: 500

Quote from: nhminer on November 04, 2014, 02:13:35 PM

SP20 arrived today; up and mining in 30 minutes

However, ASIC stats shows:
LOOP[3] OFF (test serial failed or something)
6: disabled (i2c good, no OC)
7: disabled (i2c good, no OC)

Should I be concerned?

~nh

PS -- email sent to support, but I'm looking for collective wisdom here...

Yes.
The unit didn't manage to make the 2 ASICs work. That is 25% of it's ASICs, so that has big impact. Both ASICs 6 and 7 sit on same PSU.
Try to switch PSU between boards to see if the problem in board or PSU.

zvisha

hero member

Activity: 560

Merit: 500

Hi all.
We will be using Chrome Shared Desktop instead of TeamViewer from now to provide support.
Please install Chrome R.D. if calling for support (or open ports).
Regards

wh00per

hero member

Activity: 572

Merit: 500

Quote from: Biodom on November 04, 2014, 03:17:51 PM

No? This is NOT a marketplace thread, but if you insist, I have one or two for you for, say, about 9-9.5 BTC.
Watch various OP jump on this with their ridiculous 4 BTC comments. Then, perhaps, moderator will remove all of this.
SP35 is for sale at $3900 plus shipping, that's more than 12 BTC.
Sp35 is 5.5 th vs 4.5 th for Sp-30., but ships later in the month. 12X4.5/5.5=9.81 BTC fair price for Sp-30.

Back during the summer I paid 10.5 BTC for a SP30. I got refunded 2.1 BTC (for compensation) and the nice unit mined 4.24268512 BTC up to this date. I can see where Blazedout419 comes from. It makes some sense what he said if you disregard the hosting paid since Aug, or electricity if you were keeping it at home.

I guess the answer is between 4 BTC and 9 BTC .. if I would want to get even right now, I'd sell it somewhere around 6.5 BTC .. the hosting is expensive (about 1 BTC/month now). However, the units are good and can mine a lot longer. If you have free electricity ~4 BTC is straight on the spot. With the unit I got home, the whole thing gets more complicated. I paid another $560 in taxes at customs (so another 1.5 BTC) .. that makes it even more expensive (up to 8 BTC) if you buy one from Canada. And that's just to get even, and if the seller does not want to make any profit on it.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: Prelude on November 04, 2014, 08:00:52 AM

Quote from: Biodom on November 04, 2014, 12:37:20 AM

Quote from: Blazed on November 03, 2014, 09:34:16 PM

Quote from: Prelude on November 03, 2014, 08:59:34 PM

How much BTC would you guys pay for a used sp30 right now?

4BTC maybe

can a "hero" pawnshop move away to another thread, please.

No.

And to clarify since I've gotten PMs to buy my SP30, I don't have one. I was thinking about buying a used SP30.

No? This is NOT a marketplace thread, but if you insist, I have one or two for you for, say, about 9-9.5 BTC.
Watch various OP jump on this with their ridiculous 4 BTC comments. Then, perhaps, moderator will remove all of this.
SP35 is for sale at $3900 plus shipping, that's more than 12 BTC.
Sp35 is 5.5 th vs 4.5 th for Sp-30., but ships later in the month. 12X4.5/5.5=9.81 BTC fair price for Sp-30.

hdbuck

legendary

Activity: 1260

Merit: 1002

Quote from: nhminer on November 04, 2014, 02:13:35 PM

PS -- email sent to support, but I'm looking for collective wisdom here...

you should wait their answer. ^^

nhminer

sr. member

Activity: 473

Merit: 250

SP20 arrived today; up and mining in 30 minutes

However, ASIC stats shows:
LOOP[3] OFF (test serial failed or something)
6: disabled (i2c good, no OC)
7: disabled (i2c good, no OC)

Should I be concerned?

~nh

PS -- email sent to support, but I'm looking for collective wisdom here...

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Bicknellski on November 04, 2014, 02:55:29 AM

-------------------------

Buy BTC with $$$ then buy miners with BTC is what I do, when and if the price is right and profitability / resale potential is possible. These units do have a strong resale value still.

So you are not EVEN mining right?
And when deal does not suits you you cry for refund. Nice seems fair.
How pathetic..

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: Biodom on November 04, 2014, 12:37:20 AM

Quote from: Blazed on November 03, 2014, 09:34:16 PM

Quote from: Prelude on November 03, 2014, 08:59:34 PM

How much BTC would you guys pay for a used sp30 right now?

4BTC maybe

can a "hero" pawnshop move away to another thread, please.

No.

And to clarify since I've gotten PMs to buy my SP30, I don't have one. I was thinking about buying a used SP30.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 311. (Read 1260290 times)