Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 381. (Read 1260354 times)

Have you skyped zvi? If you have teamviewer installed, he will help you directly.

Latest firmware and yes the PSU´s are running in 2 different circuits

Thanks, you can apply them to the SP50 now

That is wonderful, seems you have +5%   

What are you guys's hashrate? My sp30 runs at around 4600 Ghps 24h average, is that below, above or precisely average?

Yes.
Skype me at zvi_shteingart with team-viewer ready.

Due to a technical restriction the discount coupons are valid only for SP31. Should you choose to hang on to them for future products please contact us and we will replace the coupon.

Please contact us at [email protected] with your order number.

I did not get a coupon

Tell me first what voltage you are running at and whether the psus are on two different circuits.

Also, what firmware?

Please update all new units to 2.3.30

Yes restarted several times on GUI but not on current, should i restart them powering it off and then on ? I will try that when i get to the bunker

yes, it means that one of your two boards is basically completely disabled. (thats why it says BAD)
Only a total of 6 out of 30 chips are currently being powered properly.

Have you properly connected both PSUs? What voltage are you running at?

It looks to me like the top PSU isn´t providing any power at all.

Are you running on 2.3.30? Have you tried restarting you unit?

Ahummmm is this bad news ??


Uptime:2366 | FPGA ver:13
-----TOP-BOARD-----
PSU-TOP[NONE]: 0->0w[0 0 0] (lim=1360) 0c cooling:0/0x27000000
LOOP[0] OFF (no PSU)
0: disabled (i2c BAD, btw!)
1: disabled (i2c BAD, btw!)
2: disabled (i2c BAD, btw!)
LOOP[1] OFF (no PSU)
3: disabled (i2c BAD, btw!)
4: disabled (i2c BAD, btw!)
5: disabled (i2c BAD, btw!)
LOOP[2] OFF (no PSU)
6: disabled (i2c BAD, btw!)
7: disabled (i2c BAD, btw!)
8: disabled (i2c BAD, btw!)
LOOP[3] OFF (no PSU)
9: disabled (i2c BAD, btw!)
10: disabled (i2c BAD, btw!)
11: disabled (i2c BAD, btw!)
LOOP[4] OFF (no PSU)
12: disabled (i2c BAD, btw!)
13: disabled (i2c BAD, btw!)
14: disabled (i2c BAD, btw!)
----BOTTOM BOARD------
PSU-BOT[EMERSON1200]: 1440->1336w[1332 1328 1336] (lim=1335) 0c cooling:0/0x27000000
LOOP[5] ON
15: DC2DC/1/:[vlt1:730 vlt2:735(DCl:794 Tl:794 Ul:749) 87W 118A  77c] ASIC:[ 85c  870hz(BL: 870)  177 (E:193) F:0]
16: DC2DC/1/:[vlt1:732 vlt2:738(DCl:794 Tl:794 Ul:749) 89W 121A  80c] ASIC:[ 85c  885hz(BL: 885)  163 (E:193) F:0]
17: DC2DC/1/:[vlt1:699 vlt2:703(DCl:703 Tl:794 Ul:749) 78W 111A  67c] ASIC:[ 85c  850hz(BL: 850)  195 (E:193) F:0]
LOOP[6] ON
18: DC2DC/1/:[vlt1:722 vlt2:727(DCl:727 Tl:794 Ul:749) 90W 123A  82c] ASIC:[ 85c  910hz(BL: 910)  207 (E:193) F:0]
19: DC2DC/1/:[vlt1:703 vlt2:709(DCl:709 Tl:794 Ul:749) 77W 109A  82c] ASIC:[ 85c  825hz(BL: 825)  184 (E:193) F:0]
20: DC2DC/1/:[vlt1:718 vlt2:722(DCl:722 Tl:794 Ul:749) 87W 120A  85c] ASIC:[ 85c  885hz(BL: 885)  196 (E:192) F:0]
LOOP[7] OFF (no PSU)
21: disabled (i2c good)
22: disabled (i2c good)
23: disabled (i2c good)

Can I ask in this thread as I'm sure other will be interested too.

I have my vouchers thanks, it says they are valid for 6 months, are they restricted to the SP30/31 ?

I'd probably take a gamble and wait for what you have coming next if they aren't.

All of the August customers who requested a coupon were sent one.

We are now going over the September list.

Gadi

Some have received. Send an e-mail to sales@ asking about the coupon.

Edit: Noob question. Can I power the SP30 with regular PSU power cords that have 10A on them? I see that the cables SP-Tech used for PSUs have 15A. By my math plugging the PSUs on 220V should only require ~7A per PSU, but I want to be sure. Thx.

Is this answered yet? Have anybody recieved a coupon?
because i wait more than  a week for the coupon it means we who choose compensation in form of coupon are at the end of the order que...

Toomin, you resemble that remark LOL ! My views are my own and not for sale. Thats more than anybody can say for your gig here. Shilling for SPT to get hosting business ?

It is by no way silent, but one should be able to run it in a cellar with little to no sound-proofing required.

I also saw a community effort for a silent cabinet some months ago, I think by the same guy who built the open graphic card rigs.

It was fairly cheap (compared to the ludicrous amounts some companys charge) and had a very decent sound reduction.

I dont know about the noise being lower it sounds like a leafblower , I'm going to need to do some sort of sound proofing or silent cabinet.  Running two would be an insane amount of noise.