Author

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 524. (Read 1260354 times)

hero member
Activity: 818
Merit: 1006
at that point it will be the 10k btu a/c window unit vs the 4000 watts from the miners in heat (ie equiv of fighing a 4000 watt space heater)

let the better device win (man it will be like trying to heat your house with the windows open same logic)

10,000 BTU/hr is 2930 watts.

https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=10000+btu%2Fhr+in+watts

If you want to get an idea of how hot your basement will be with 4 kW of miners and 2.9 kW of AC, you can try sticking a 1.1 kW space heater (or miner) in there and letting it run without AC. This won't be exact, since the airflow from the window with the AC unit will be different, but it will be a reasonable approximation.
full member
Activity: 154
Merit: 100
Lost the post where it showed the power plugs...they are just standard 220v usa type power plugs correct?

anyway a pic of the end that goes in the socket would help seems there are 4 types at the local Menard hardware chain
pretty sure 3 are just exotic..but best to make sure

so don't know if I need something exotic of the 3 or not?

(thought I had this thread saved with pics but can't remember nor find..the mind is going)

Searing

You will need a standard 14AWG mickey mouse power cable

IEC320-C13 PSU cord.
copper member
Activity: 2898
Merit: 1465
Clueless!
Lost the post where it showed the power plugs...they are just standard 220v usa type power plugs correct?

anyway a pic of the end that goes in the socket would help seems there are 4 types at the local Menard hardware chain
pretty sure 3 are just exotic..but best to make sure

so don't know if I need something exotic of the 3 or not?

(thought I had this thread saved with pics but can't remember nor find..the mind is going)

Searing

copper member
Activity: 2898
Merit: 1465
Clueless!
Also, you have to consider temperature increases and statistical variance of hashing speed etc.
It is normal that the hashrate can go down by 30-100 GH if the unit gets warmer (e.g by 7 degrees....).


crap...what is the best temp for say sp30 (ball park guess?).... decided to stick the sp30 sept and the Titan KNC miner
in bsmt ....(cheapo.....figured 40 days of cooling vs 2-3 months heat in winter)  .prob was not my wisest move

in other words just from the get go should I have something like the window a/c unit (with say looped flex a/c type tube 16") from
front of regular basement window...about 3'ft across ceiling and then just drape the last 3 ft straight down over the sp30 unit?

would 'baby' purr better? (ie how cold is too cold or don't matter)

maybe i should just shoot for overkill in the first place (doable if a pain in the a*s)

(well..this project certainly is getting out of control)

Searing


If you have an attick, don't install any gable fans. I would definitely go for one of those full house fans that usually sit on your roof in the middle of the attick. If you get one powerful enough it can pull and circulate the air in your house in a matter of minutes. I've seen some so powerful that if you open up the access panel to the attick while the fan is on and toss a tissue in the air it will get swept up into the attack. Negative air pressure is what you want of course for that air circulation. I learned my lesson with this by installing gable fans on both ends of my attick and basically nothing happened. Too bad those evaporative fans don't work good in the summer.

sorry I was unclear by 'attic fans' i ment the fans you are refering to but plan to put them in bsmt windows (cold limestone bsmt) and use them to push/pull or whatever air thru the bsmt on those days it makes sense to do so..if there is a particular attic type fan (type not actully in the attic I just call them that) anyway a 'fan' that would work better to get air flow in and out of the bsmt on those days it makes sense please refer me to such (all you gpu guys had to get heat out of the bsmt somehow)

but arriving in august titan and sept sp30 i suspect there will be 30 days or so where just plan ass a/c window unit gets cranked up....no real sense in dragging in  humid 95F degree heat in the bsmt till bsmt is 94F and humid and then pushing it out again ..at that point it will be the 10k btu a/c window unit vs the 4000 watts from the miners in heat (ie equiv of fighing a 4000 watt space heater)


let the better device win (man it will be like trying to heat your house with the windows open same logic)

anyway over kill it is...may not need window a/c unit for some sweltering days better to set it up ahead of time as a failsafe..would have been nice to have central air

(alas those $$$ went into miners heh)

Searing
hero member
Activity: 966
Merit: 502

I've seen the email, we'll reply.

Regards,
Guy

Thanks, I appreciate your reply...
legendary
Activity: 1274
Merit: 1000
Personal text my ass....
Also, you have to consider temperature increases and statistical variance of hashing speed etc.
It is normal that the hashrate can go down by 30-100 GH if the unit gets warmer (e.g by 7 degrees....).


crap...what is the best temp for say sp30 (ball park guess?).... decided to stick the sp30 sept and the Titan KNC miner
in bsmt ....(cheapo.....figured 40 days of cooling vs 2-3 months heat in winter)  .prob was not my wisest move

in other words just from the get go should I have something like the window a/c unit (with say looped flex a/c type tube 16") from
front of regular basement window...about 3'ft across ceiling and then just drape the last 3 ft straight down over the sp30 unit?

would 'baby' purr better? (ie how cold is too cold or don't matter)

maybe i should just shoot for overkill in the first place (doable if a pain in the a*s)

(well..this project certainly is getting out of control)

Searing


If you have an attack, don't install any gable fans. I would definitely go for one of those full house fans that usually sit on your roof in the middle of the attack. If you get one powerful enough it can pull and circulate the air in your house in a matter of minutes. I've seen some so powerful that if you open up the access panel to the attack while the fan is on and toss a tissue in the air it will get swept up into the attack. Negative air pressure is what you want of course for that air circulation. I learned my lesson with this by installing gable fans on both ends of my attack and basically nothing happened. Too bad those evaporative fans don't work good in the summer.

I know spelling error corrections are frowned upon by the board moderators. But due to the current Middle East conflict, I would like to point that the word "attack" used 4 times above should be "attic".

Another post today used "soldier" instead of "solder". Freudian slips, perhaps? Or just bad spellers? Lol.

Damn, my bad. Changed.
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
I guess that explains why I haven't received a response from Spondoolies' CS, you've been preoccupied with more pressing concerns.

 Glad to hear that you guy's are OK.

Posted From bitcointalk.org Android App

I've seen the email, we'll reply.

Regards,
Guy
hero member
Activity: 784
Merit: 1004
Glow Stick Dance!
Also, you have to consider temperature increases and statistical variance of hashing speed etc.
It is normal that the hashrate can go down by 30-100 GH if the unit gets warmer (e.g by 7 degrees....).


crap...what is the best temp for say sp30 (ball park guess?).... decided to stick the sp30 sept and the Titan KNC miner
in bsmt ....(cheapo.....figured 40 days of cooling vs 2-3 months heat in winter)  .prob was not my wisest move

in other words just from the get go should I have something like the window a/c unit (with say looped flex a/c type tube 16") from
front of regular basement window...about 3'ft across ceiling and then just drape the last 3 ft straight down over the sp30 unit?

would 'baby' purr better? (ie how cold is too cold or don't matter)

maybe i should just shoot for overkill in the first place (doable if a pain in the a*s)

(well..this project certainly is getting out of control)

Searing


If you have an attack, don't install any gable fans. I would definitely go for one of those full house fans that usually sit on your roof in the middle of the attack. If you get one powerful enough it can pull and circulate the air in your house in a matter of minutes. I've seen some so powerful that if you open up the access panel to the attack while the fan is on and toss a tissue in the air it will get swept up into the attack. Negative air pressure is what you want of course for that air circulation. I learned my lesson with this by installing gable fans on both ends of my attack and basically nothing happened. Too bad those evaporative fans don't work good in the summer.

I know spelling error corrections are frowned upon by the board moderators. But due to the current Middle East conflict, I would like to point that the word "attack" used 4 times above should be "attic".

Another post today used "soldier" instead of "solder". Freudian slips, perhaps? Or just bad spellers? Lol.
legendary
Activity: 1274
Merit: 1000
Personal text my ass....
Also, you have to consider temperature increases and statistical variance of hashing speed etc.
It is normal that the hashrate can go down by 30-100 GH if the unit gets warmer (e.g by 7 degrees....).


crap...what is the best temp for say sp30 (ball park guess?).... decided to stick the sp30 sept and the Titan KNC miner
in bsmt ....(cheapo.....figured 40 days of cooling vs 2-3 months heat in winter)  .prob was not my wisest move

in other words just from the get go should I have something like the window a/c unit (with say looped flex a/c type tube 16") from
front of regular basement window...about 3'ft across ceiling and then just drape the last 3 ft straight down over the sp30 unit?

would 'baby' purr better? (ie how cold is too cold or don't matter)

maybe i should just shoot for overkill in the first place (doable if a pain in the a*s)

(well..this project certainly is getting out of control)

Searing


If you have an attick, don't install any gable fans. I would definitely go for one of those full house fans that usually sit on your roof in the middle of the attick. If you get one powerful enough it can pull and circulate the air in your house in a matter of minutes. I've seen some so powerful that if you open up the access panel to the attick while the fan is on and toss a tissue in the air it will get swept up into the attack. Negative air pressure is what you want of course for that air circulation. I learned my lesson with this by installing gable fans on both ends of my attick and basically nothing happened. Too bad those evaporative fans don't work good in the summer.
hero member
Activity: 966
Merit: 502
I guess that explains why I haven't received a response from Spondoolies' CS, you've been preoccupied with more pressing concerns.

 Glad to hear that you guy's are OK.

Posted From bitcointalk.org Android App
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs

We'll ship on time.


So we should be getting some SP30 reports in from the field before the end of July, eh ?
Yes
legendary
Activity: 1316
Merit: 1014
ex uno plures

We'll ship on time.


So we should be getting some SP30 reports in from the field before the end of July, eh ?
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
To all the well wishers, from past experience, the round of violence will end in a week or two.
We'll ship on time.

Guy
legendary
Activity: 1288
Merit: 1004
Great news.
It is good to see more and more pop upi.
Good job  Grin

ICELAND P2POOL NODE IS UP AND RUNNING  Grin

http://is.centralcavern.uk:9332/static/
legendary
Activity: 1288
Merit: 1004
Yes you can.
Some soldier joins can crack with the severe cold. and then heat.
That being said for the most part you do not have to worry.


would 'baby' purr better? (ie how cold is too cold or don't matter)

You can't have too cold when it comes to mining machines. (as long as you don't have condensation)
legendary
Activity: 2408
Merit: 1102
Leading Crypto Sports Betting & Casino Platform
To all our customers (even the unreal provocateur ones) - we're ok.
We got a lot of heartwarming emails and we wanted to thank you.

It's not an easy situation for us, but we'll manage. Rest assure that the orders will be shipped on time.

Some facts:

- Our houses and families are within range of the missiles. Most of the population are.
- Our offices are about 100 meter from Intel 22nm Fab (soon 10nm Fab), which means that we have excellent Iron Dome coverage.
- Flextronics manufacturing plant is in the far north, well outside the range of the current conflict. Shipping is done from there.
- The mandatory enlisting of reserved forces is minimal. None of our engineers and employees have been drafted.

Guy
Can you see the smoke from there?
Son-of-a-bitch!!!  Now they are shooting from Lebanon too!!!  Please, please, please don't hit the miners at the shipping facility. 


hmmm....what about the hosting facility in Israel. Just looking over their site and can't find a TOS for the hosting. I have to think our machines are insured? Then again for other international trade terms and conditions I think Acts of War are not covered.

crossing fingers
newbie
Activity: 2
Merit: 0
To all our customers (even the unreal provocateur ones) - we're ok.
We got a lot of heartwarming emails and we wanted to thank you.

It's not an easy situation for us, but we'll manage. Rest assure that the orders will be shipped on time.

Some facts:

- Our houses and families are within range of the missiles. Most of the population are.
- Our offices are about 100 meter from Intel 22nm Fab (soon 10nm Fab), which means that we have excellent Iron Dome coverage.
- Flextronics manufacturing plant is in the far north, well outside the range of the current conflict. Shipping is done from there.
- The mandatory enlisting of reserved forces is minimal. None of our engineers and employees have been drafted.

Guy
Can you see the smoke from there?
Son-of-a-bitch!!!  Now they are shooting from Lebanon too!!!  Please, please, please don't hit the miners at the shipping facility. 


hmmm....what about the hosting facility in Israel. Just looking over their site and can't find a TOS for the hosting. I have to think our machines are insured? Then again for other international trade terms and conditions I think Acts of War are not covered.
newbie
Activity: 2
Merit: 0
Today is 41 days since my machines went online at Spondoolies DC. Right now achieved 50% ROI! YAY !

What has happened there in the last 24 hours as of today's date (July 11) exactly?  They are all running at absolute peak performance. Best I have seen yet. Cold snap come in? AC cranked up? Mighty curious at this point
legendary
Activity: 3892
Merit: 4331
Son-of-a-bitch!!!  Now they are shooting from Lebanon too!!!  Please, please, please don't hit the miners at the shipping facility. 

Maybe Spondoolies should move to China. Could help with their lead times in ordering parts.

at least their manufacturing and shipping...
spond could be an apple of bitcoinmining...design the product and market it, let others manufacture and assemble...
vip
Activity: 1358
Merit: 1000
AKA: gigavps
Son-of-a-bitch!!!  Now they are shooting from Lebanon too!!!  Please, please, please don't hit the miners at the shipping facility. 

Maybe Spondoolies should move to China. Could help with their lead times in ordering parts.
Jump to: