[ANN] [SPOT] | SUCCESSFUL FORK COMPLETE - On CoinPayments.net/Cryptsy/Coins-e - page 41.

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: ?? on ??

Can somebody please tell me or point me to a website or something where I can find how many Spots have been mined as of today?

Coinmarketcap.com. Still just a little over 3 million so far in like 5 months. Still early to get in on the price rally. Don't dump them. Hold for a few days and you can thank me next week

saedelaere

newbie

Activity: 3

Merit: 0

Any good pool where I could mine some spots?

pindis

full member

Activity: 187

Merit: 100

Quote from: vual on December 13, 2013, 10:11:45 AM

Quote from: iGotSpots on December 12, 2013, 11:18:52 PM

I would like to help you guys, and I'm doing my best, but all the answers for your issues have already been given. If you are still having any problems, please post in as much detail as you can what you are trying to do and what problem you are coming across. Syncing should not be a problem at all if you add p2pool.org, as someone else suggested earlier in the thread. I had no problems syncing before adding it, but that definitely sped it up quite a bit...but try starting from scratch if you are having problems:

Code:

1) Make a .bat in your Spots folder that says "spots-qt.exe -server" without the quotes
2) Make a .conf file in %appdata%/Spots/spots.conf saying this to load your QT as a server:
(You can use any user/pass/port you want as long as they match your mining .bat)

rpcuser=x
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=8108
server=1
gen=0

addnode=96.2.111.139
addnode=67.167.228.42
addnode=69.85.86.195
addnode=68.103.6.158
addnode=71.187.248.95
addnode=70.69.238.84
addnode=108.185.218.246
addnode=70.98.114.229
addnode=p2pool.org

Let it sync (it may take a while)

3) Make a .bat for your miner (or use config files) to point it to 127.0.0.1:8018 (or the user/port/pass you used in your config)

4) Make money!

Hope this helps

Did you add...
addnode=p2pool.org
?

Yes sir.

Dillinger

newbie

Activity: 20

Merit: 0

I had no problems sync my wallet yesterday. I think the problem in this case is in user itself.

vual

hero member

Activity: 714

Merit: 500

Quote from: iGotSpots on December 12, 2013, 11:18:52 PM

I would like to help you guys, and I'm doing my best, but all the answers for your issues have already been given. If you are still having any problems, please post in as much detail as you can what you are trying to do and what problem you are coming across. Syncing should not be a problem at all if you add p2pool.org, as someone else suggested earlier in the thread. I had no problems syncing before adding it, but that definitely sped it up quite a bit...but try starting from scratch if you are having problems:

Code:

1) Make a .bat in your Spots folder that says "spots-qt.exe -server" without the quotes
2) Make a .conf file in %appdata%/Spots/spots.conf saying this to load your QT as a server:
(You can use any user/pass/port you want as long as they match your mining .bat)

rpcuser=x
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=8108
server=1
gen=0

addnode=96.2.111.139
addnode=67.167.228.42
addnode=69.85.86.195
addnode=68.103.6.158
addnode=71.187.248.95
addnode=70.69.238.84
addnode=108.185.218.246
addnode=70.98.114.229
addnode=p2pool.org

Let it sync (it may take a while)

3) Make a .bat for your miner (or use config files) to point it to 127.0.0.1:8018 (or the user/port/pass you used in your config)

4) Make money!

Hope this helps

Did you add...
addnode=p2pool.org
?

pindis

full member

Activity: 187

Merit: 100

It's been 10 minutes and still hasn't started syncing. is something going on?

vual

hero member

Activity: 714

Merit: 500

Quote from: Scrappy Do on December 13, 2013, 01:00:15 AM

The damn wallet will not sync. I lost 16 hours of 8000 + kh/s mining on this coin. The dev does have a solution. There is an issue with this coin. Wallet was fully synced, as I would never turn a miner on bad wallet, yet I had damn near 10k spots, and they are gone. I need some help recovering this, or this coin is total shit.

I know what thew hell I am doing. please check my feedback and trust. But this coin just burned me. Sad

Like you where told about 7 times now, you are doing it wrong

Dont start mining untill you sync, shit i even stopped what i was doing yesterday and i took the time to download source code and build the daemon again and then re-download chain all for you in my spar time to make sure it was working, i then reported to you that it was........... Fuck im not even a dev just a random user.

Can i ask these questions:

- Where do you mine, solo or pool?
- GIVE ME A DUMP OR YOUR GETINFO ARRAY!
- What KH/S do you mine with ?? 8Mh/s
- How long did it take you to mine 10k spots?? 16hrs
- When did you start mining, when did you find SPOTS?
(i found some answers in your posts and filled them in for you)

I mean 49 spots a block... like i said before it dosn't add up.....
some thing is fishy, hey don't get me wrong we will find out soon when you report how long it took to make those 10k coins and what your KH/S is .
Please answer my questions so we all can try help you mate.

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: Scrappy Do on December 13, 2013, 01:00:15 AM

The damn wallet will not sync. I lost 16 hours of 8000 + kh/s mining on this coin. The dev does have a solution. There is an issue with this coin. Wallet was fully synced, as I would never turn a miner on bad wallet, yet I had damn near 10k spots, and they are gone. I need some help recovering this, or this coin is total shit.

I know what thew hell I am doing. please check my feedback and trust. But this coin just burned me. Sad

Not sure who you are referring to for having a solution. I've responded to you several times. Nobody is stealing any of your coins, but if you feel like it's shit then there's not much else I can do to help. I synced it on three separate wallets today. I'm beginning to think the problem is between your keyboard and chair

Scrappy Do

hero member

Activity: 686

Merit: 500

The damn wallet will not sync. I lost 16 hours of 8000 + kh/s mining on this coin. The dev does have a solution. There is an issue with this coin. Wallet was fully synced, as I would never turn a miner on bad wallet, yet I had damn near 10k spots, and they are gone. I need some help recovering this, or this coin is total shit.

I know what thew hell I am doing. please check my feedback and trust. But this coin just burned me. Sad

coinpig

newbie

Activity: 15

Merit: 0

Hi

Can i mine it with cpu on cloud ?

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: Coinsy on December 12, 2013, 11:33:39 PM

Just bought me some Spots!

Great choice! You are still in early on the price jump, too. Tickets was only at $30k before we started moving it and it hit $6 million USD market cap before settling around 2 million+. You can assume the same will happen with Spots Wink

Coinsy

full member

Activity: 163

Merit: 100

Just bought me some Spots!

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

I would like to help you guys, and I'm doing my best, but all the answers for your issues have already been given. If you are still having any problems, please post in as much detail as you can what you are trying to do and what problem you are coming across. Syncing should not be a problem at all if you add p2pool.org, as someone else suggested earlier in the thread. I had no problems syncing before adding it, but that definitely sped it up quite a bit...but try starting from scratch if you are having problems:

Code:

1) Make a .bat in your Spots folder that says "spots-qt.exe -server" without the quotes
2) Make a .conf file in %appdata%/Spots/spots.conf saying this to load your QT as a server:
(You can use any user/pass/port you want as long as they match your mining .bat)

rpcuser=x
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=8108
server=1
gen=0

addnode=96.2.111.139
addnode=67.167.228.42
addnode=69.85.86.195
addnode=68.103.6.158
addnode=71.187.248.95
addnode=70.69.238.84
addnode=108.185.218.246
addnode=70.98.114.229
addnode=p2pool.org

Let it sync (it may take a while)

3) Make a .bat for your miner (or use config files) to point it to 127.0.0.1:8018 (or the user/port/pass you used in your config)

4) Make money!

Hope this helps

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: dwayneblocks on December 12, 2013, 04:56:05 PM

So what's going on with this coin!? I can't get my wallet to sync.. :/ I want to start mining!!

Use addnode=p2pool.org in your spots.conf

Quote from: Scrappy Do on December 12, 2013, 10:25:23 PM

Seriously, I need some help. I mined this coin solo for 16 hours. I have 8000+kh/s. Wallet will not sync, and coins gone. Please help.

Use addnode=p2pool.org in your spots.conf

The only way your coins could have possibly disappeared from your wallet is if you were mining before being synced, thus finding blocks already found. Other than that, no coins can possibly disappear unless you deleted wallet.dat. There are no forks or anything, so those are the only two ways coins could disappear

I have synced up 3 rigs just today on Spots. I deleted my whole %appdata%/Spots folder to make sure it was a fresh try, used p2pool.org as an addnode, and synced very quickly. On all 3 machines...

If you guys are still somehow getting the Litecoin message...you can block ports, ban the bad node, or just ignore the message. It's purely cosmetic, but I don't get it on any of my rigs so I can't verify that it is still coming up with the newest version of the QT. As long as it says "Downloaded x of y blocks" and x is the current Spots block, you are synced. Regardless of any messages you see

Scrappy Do

hero member

Activity: 686

Merit: 500

Seriously, I need some help. I mined this coin solo for 16 hours. I have 8000+kh/s. Wallet will not sync, and coins gone. Please help.

dwayneblocks

newbie

Activity: 7

Merit: 0

So what's going on with this coin!? I can't get my wallet to sync.. :/ I want to start mining!!

geronimo77

sr. member

Activity: 476

Merit: 250

on p2pool.org im only getting stratum requested work restart over and over agan....no accepts no rejects

NUFCrichard

legendary

Activity: 1218

Merit: 1003

How do you mine using the client? I selected 2 threads and 99 scantime but it did nothing

MVRKANaetxcMBeDFyAnTnMXGvaf9hkqfQu

yabit

hero member

Activity: 658

Merit: 500

started today!

MPLjEQ5eVrrvezfNfyZt2STtJSLyrFzALn

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: Xer on December 12, 2013, 09:23:16 AM

How long would it take to find a block if solo mining with 900 khash?
There is no working pool for spots.

Edit: whats going on with the difficulty, its jumping between 2 and 15 all the time. Is someone having fun turning on/off a huge unknown asic miner?

Diff adjusts every block, like it has for the last 5 months. Unless someone has invented a Scrpyt ASIC, I doubt that's the case Wink

Topic: [ANN] [SPOT] | SUCCESSFUL FORK COMPLETE - On CoinPayments.net/Cryptsy/Coins-e - page 41. (Read 166085 times)