reservebalance=7
Your weight is 1
Network weight is 2
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10881,
"moneysupply" : 49506.12306100,
"connections" : 3,
"proxy" : "",
"ip" : "twp5t7bxfz6g4g43.onion",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
Topic: [ANN] Triangles [TRI] Now Stable & Working Anonymous Cloak over TOR - ON BITTREX - page 27. (Read 90287 times)
August 15, 2014, 02:10:57 PM
August 15, 2014, 09:50:00 AM
I see the price creeping up...hit 50,000 yesterday.
August 15, 2014, 09:49:23 AM
This is where Im at now. Says im minting.. Sorry I missed messages the other night and had closed my client. I'll leave it run for now...
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10881,
"moneysupply" : 49506.12306100,
"connections" : 1,
"proxy" : "",
"ip" : "4ykn4rifrcxrubdp.onion",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10881,
"moneysupply" : 49506.12306100,
"connections" : 1,
"proxy" : "",
"ip" : "4ykn4rifrcxrubdp.onion",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
August 14, 2014, 12:34:43 AM
It seems like we are at a stalemate with triangles. What's up with the peer showing 11111 blocks?
He is on a fork and should resync his client.
edit: yep. looks like a stalemate. thats a dev job.
August 13, 2014, 06:51:41 PM
It seems like we are at a stalemate with triangles. What's up with the peer showing 11111 blocks?
August 13, 2014, 01:41:51 PM
Nice graphics. Less than 50,000 coins out - ultra rare. May be one of the more valuable coins in the near future.
August 13, 2014, 11:37:55 AM
Whats this i see?? 2 new blocks?!!
newer transactions still have 0 confirms, but mined transactions show 2 more confirms. Only 36 more blocks to go!
newer transactions still have 0 confirms, but mined transactions show 2 more confirms. Only 36 more blocks to go!
you would have confirmations on those transactions if someone had followed what i wrote above.... :/
@pseudonymdude: i doubt that we will get another 27 blocks with current coin maturity settings. This is the time for the dev to do something.
@3angle: do it!
August 13, 2014, 11:35:27 AM
I might be first, but if anyone needs less than 27 transactions, make sure to set reserve balance as per wurstgelee's instructions
August 13, 2014, 12:32:31 AM
wow, lots of transactions..... - see "getrawmempool". 
August 12, 2014, 05:53:02 PM
Whats this i see?? 2 new blocks?!!
newer transactions still have 0 confirms, but mined transactions show 2 more confirms. Only 36 more blocks to go!
newer transactions still have 0 confirms, but mined transactions show 2 more confirms. Only 36 more blocks to go!
August 12, 2014, 04:18:43 PM
Same way you start a wallet from the terminal but with commandline switches. Switches should be the same for al platforms.
STOP!
But before you do that (only in case you have coins in your wallet!):
Please add an additonal comand line switch ans start the wallet like this via terminal: <-- That should be the answer to your question, right?
/path/to/ -loadblock=/path/to/block -reservebalance=100000
This way your wallet would sync but wouldnt start staking (since 100000 coins would be excluded from staking - double the amount of all TRI). If everything works leave your wallet online that way.
Post here stating that you have an online wallet ready to stake and give others a few hours to send coins from bittrex. If your wallet is online while these transactions are initiated, these transaction are known to your wallet and are included in the 1st block you are gonna mine.
Also other users should do "resendtx" via debug console to repopulate the unconfirmed transactions they have in their wallets. (im not sure if this works - it should. or not? could someone confirm?)
After you left the wallet online without staking for a while (a whole day would be superb if possible - different timezones of users...
), the actual staking begins:
The goal is mining at least 5 blocks (4, but 5 is better) with your TRI balance - to do this, you only put 20% of your coins on stake for each block. this is how you do it:
Lets say you have 100 TRI.
-close your wallet
-start it again, tihs time with: /path/to -loadblock=/path/to/block -reservebalance=80 -> only 20 TRI on stake
-when block mined (+5 mins or more), close your wallet
-start it again, tihs time with: /path/to -loadblock=/path/to/block -reservebalance=60 -> only 20 TRI on stake
-when block mined (+5 mins or more), close your wallet
-start it again, tihs time with: /path/to -loadblock=/path/to/block -reservebalance=60 -> only 20 TRI on stake
And so on. You get the drill.
If this works out, some people should have "fresh" coins for minting in their wallet and the blockchain should start moving again.
TRI would be forever in your debt. You know why.
edit: I hope I'm right about the mac terminal commandline part - someone correct me if I'm not.
STOP!
But before you do that (only in case you have coins in your wallet!):
Please add an additonal comand line switch ans start the wallet like this via terminal: <-- That should be the answer to your question, right?
/path/to/
This way your wallet would sync but wouldnt start staking (since 100000 coins would be excluded from staking - double the amount of all TRI). If everything works leave your wallet online that way.
Post here stating that you have an online wallet ready to stake and give others a few hours to send coins from bittrex. If your wallet is online while these transactions are initiated, these transaction are known to your wallet and are included in the 1st block you are gonna mine.
Also other users should do "resendtx" via debug console to repopulate the unconfirmed transactions they have in their wallets. (im not sure if this works - it should. or not? could someone confirm?)
After you left the wallet online without staking for a while (a whole day would be superb if possible - different timezones of users...
), the actual staking begins:The goal is mining at least 5 blocks (4, but 5 is better) with your TRI balance - to do this, you only put 20% of your coins on stake for each block. this is how you do it:
Lets say you have 100 TRI.
-close your wallet
-start it again, tihs time with: /path/to
-when block mined (+5 mins or more), close your wallet
-start it again, tihs time with: /path/to
-when block mined (+5 mins or more), close your wallet
-start it again, tihs time with: /path/to
And so on. You get the drill.
If this works out, some people should have "fresh" coins for minting in their wallet and the blockchain should start moving again.
TRI would be forever in your debt. You know why.
edit: I hope I'm right about the mac terminal commandline part - someone correct me if I'm not.
August 12, 2014, 12:35:43 PM
AND FOR MAC?[/color]
what command line to open on terminal??
riangles-qt.exe -loadblock= (like c:\blk0001.dat)
?
how to use peers.dat and blk0001.dat:
- (close wallet if not done already)
- replace your peers.dat @ %userprofile%\appdata\Roaming\triangles (windows) with the one from the archive.
- delete or rename your blk*.dat files in the same folder (both) and start your wallet like this:
triangles-qt.exe -loadblock= (like c:\blk0001.dat)
takes a few secs but your wallet should come up with 10868 blocks.
wait another few mins and you should have some connections.
TRADE ON BITTREX: https://bittrex.com/Market/Index?MarketName=BTC-TRI
UPDATE: NEW WEBSITE: http://www.triangles.club/
Cryptographic Triangles (TRI)
Because you know why
SOURCE: https://github.com/TrianglesProject/triangles (UPDATED)
use the source-code for now until the network is stable on the new fork, wallets will be compiled one at a time - we are breaking new ground and solving brand new issues, this is extremely experimental software - Updated, all networks are now operational and oiled for smoothness.
Triangles Block Explorer
http://162.243.238.12:9999
ipoMiner has added Triangles on direct port 3717. Just register at ipoMiner and then use stratum+tcp://pool.ipominer.com:3717 (They seem to have some Pool-issues)
http://www.hashharder.com/x13/triangles IS UP
Good Luck
PS: 2 blocks has been pre-mined (2 coins)
Because you know why
UPDATE:
Triangles.....: 49,497 Coins PoW
Plutonium....: 109,980 Coins PoW
Unobtanium.: 250,000 Coins PoW
Arcoin.........: 500,000 Coins PoW
Bitcoin........: 21,000,000 Coins PoW
Litecoin.......: 44,000,000 Coins PoW
BankNote....: 30,000,000,000 Coins PoW
DogeCoin....: 100,000,000,000 Coins PoW
DimeCoin....: 460,000,000,000 Coins PoW
sCoin..........: 1,000,000,000,000 Coins PoW
Support the network with triangles to PoS Wallet: TQHZPz75UmorQbsfDYDwsNEiAakJDWjxKF
A few coins here and there will oil things smooth - do not forget to stake your coins also - you know why.
what command line to open on terminal??
riangles-qt.exe -loadblock=
?how to use peers.dat and blk0001.dat:
- (close wallet if not done already)
- replace your peers.dat @ %userprofile%\appdata\Roaming\triangles (windows) with the one from the archive.
- delete or rename your blk*.dat files in the same folder (both) and start your wallet like this:
triangles-qt.exe -loadblock=
takes a few secs but your wallet should come up with 10868 blocks.
wait another few mins and you should have some connections.
TRADE ON BITTREX: https://bittrex.com/Market/Index?MarketName=BTC-TRI
UPDATE: NEW WEBSITE: http://www.triangles.club/
Cryptographic Triangles (TRI)
Because you know why
SOURCE: https://github.com/TrianglesProject/triangles (UPDATED)
peers.dat and blk00001.dat (10868 blocks):
https://mega.co.nz/#!ZQUCzILB!8w0obeEDOKyr-R7VWqaUbt6qyn3lUMspFD8F089xC2A
how to use peers.dat and blk0001.dat:
- (close wallet if not done already)
- replace your peers.dat @ %userprofile%\appdata\Roaming\triangles (windows) with the one from the archive.
- delete or rename your blk*.dat files in the same folder (both) and start your wallet like this:
triangles-qt.exe -loadblock= (like c:\blk0001.dat)
takes a few secs but your wallet should come up with 10868 blocks.
wait another few mins and you should have some connections.
use these wallets:
WINDOWS wallet, v 3.3.4.4 "illuminatus":
https://mega.co.nz/#!9J9DFZYa!YnJ8FShl774_z7YI4kFEdt6GeyPFz1jkNh1VWvnRXR8
MAC wallet, v 3.3.4.4 "illuminatus":
https://mega.co.nz/#!sdAkjAhJ!J6wbStpOSxq3PToEZD08hv0278eMTVqrQyIhyqFYsGk
https://mega.co.nz/#!ZQUCzILB!8w0obeEDOKyr-R7VWqaUbt6qyn3lUMspFD8F089xC2A
how to use peers.dat and blk0001.dat:
- (close wallet if not done already)
- replace your peers.dat @ %userprofile%\appdata\Roaming\triangles (windows) with the one from the archive.
- delete or rename your blk*.dat files in the same folder (both) and start your wallet like this:
triangles-qt.exe -loadblock=
takes a few secs but your wallet should come up with 10868 blocks.
wait another few mins and you should have some connections.
use these wallets:
WINDOWS wallet, v 3.3.4.4 "illuminatus":
https://mega.co.nz/#!9J9DFZYa!YnJ8FShl774_z7YI4kFEdt6GeyPFz1jkNh1VWvnRXR8
MAC wallet, v 3.3.4.4 "illuminatus":
https://mega.co.nz/#!sdAkjAhJ!J6wbStpOSxq3PToEZD08hv0278eMTVqrQyIhyqFYsGk
Triangles Block Explorer
http://162.243.238.12:9999
http://www.hashharder.com/x13/triangles IS UP
Good Luck
PS: 2 blocks has been pre-mined (2 coins)
Because you know why
UPDATE:
Triangles.....: 49,497 Coins PoW
Plutonium....: 109,980 Coins PoW
Unobtanium.: 250,000 Coins PoW
Arcoin.........: 500,000 Coins PoW
Bitcoin........: 21,000,000 Coins PoW
Litecoin.......: 44,000,000 Coins PoW
BankNote....: 30,000,000,000 Coins PoW
DogeCoin....: 100,000,000,000 Coins PoW
DimeCoin....: 460,000,000,000 Coins PoW
sCoin..........: 1,000,000,000,000 Coins PoW
Support the network with triangles to PoS Wallet: TQHZPz75UmorQbsfDYDwsNEiAakJDWjxKF
A few coins here and there will oil things smooth - do not forget to stake your coins also - you know why.
August 11, 2014, 03:53:03 PM
I did try the reserve balance thing but Im still stuck and wallet not synching.
It shows I have 8 active connections to the network but does not sync.
It shows I have 8 active connections to the network but does not sync.
Block 10879 is the last block. That's the one you're on, right? If so, just leave your wallet open. It might just say out of sync because it's been awhile since the last block was generated.
This is current status of my wallet...

{
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10879,
"moneysupply" : 49506.06519900,
"connections" : 8,
"proxy" : "",
"ip" : "3aphugm42am7m6a3.onion",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
}
IMPORTANT!
(this is may be the chance to get things moving again)
so you have a balance of 8.3 something - your wallet says youre staking then i guess?
@ EVERYONE:
PLEASE DROP A NOTE HERE IF YOURE CURRENTLY MINTING SO OTHERS CAN SEND COINS FROM BITTREX! BRING WALLET ONLINE - DROP NOTE!
this way those bittrex transactions would be included in the block which will be minted by your wallet and therefore confirmed in all subsequent blocks! so this has to happen before you actually mine the block(s)!
@romeshomey:
whats the highlight text of the red "minting" icon (the triangle in the lower right corner of the wallet) if you hover your mouse pointer over it?
after that please type "reservebalance true, 7" in the debug console of your wallet.
whats the highlight text now?
edit: i just sent some more coins from bittrex....just in case.
August 11, 2014, 01:15:58 PM
those bittrex transactions not being confirmed is the phenomenon i described earlier (see 'mempool').
the good news is no coins are lost.
in the worst case, your transactions to and from bittrex start getting confirmations as soon as you mine the next block yourself because those transaction would be included in this block then ("getrawmempool" in wallet debug console - all you unconfirmed transactions should be listed there. these transactions are what your wallet would include in the next PoS block if it mints one).
your wallet should repopulate those unconfirmed transactions in a certain interval - about that part im not 100% sure.
somebody correct me please if im misguided here.
is anybody here who has confirmed coins in his wallet (not stake!) and hasn't synced to block 10879 yet? if so, reveal yourself please.
DONT SYNC - JUST POST HERE FIRST.
edit: all this dumping again. you guys are fckn impatient.
the good news is no coins are lost.
in the worst case, your transactions to and from bittrex start getting confirmations as soon as you mine the next block yourself because those transaction would be included in this block then ("getrawmempool" in wallet debug console - all you unconfirmed transactions should be listed there. these transactions are what your wallet would include in the next PoS block if it mints one).
your wallet should repopulate those unconfirmed transactions in a certain interval - about that part im not 100% sure.
somebody correct me please if im misguided here.
is anybody here who has confirmed coins in his wallet (not stake!) and hasn't synced to block 10879 yet? if so, reveal yourself please.
DONT SYNC - JUST POST HERE FIRST.
edit: all this dumping again. you guys are fckn impatient.
August 11, 2014, 10:58:04 AM
I did try the reserve balance thing but Im still stuck and wallet not synching.
It shows I have 8 active connections to the network but does not sync.
It shows I have 8 active connections to the network but does not sync.
Block 10879 is the last block. That's the one you're on, right? If so, just leave your wallet open. It might just say out of sync because it's been awhile since the last block was generated.
This is current status of my wallet...

{
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10879,
"moneysupply" : 49506.06519900,
"connections" : 8,
"proxy" : "",
"ip" : "3aphugm42am7m6a3.onion",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
}
That seems right.
I guess I was staking on the wrong fork or something, I have like a dozen mined transactions from staking that seemed to be wiped out. Changed from confirmed to unconfirmed and unaccepted.
Yeah.
August 11, 2014, 10:56:09 AM
I guess I was staking on the wrong fork or something, I have like a dozen mined transactions from staking that seemed to be wiped out. Changed from confirmed to unconfirmed and unaccepted.
August 11, 2014, 10:53:57 AM
I did try the reserve balance thing but Im still stuck and wallet not synching.
It shows I have 8 active connections to the network but does not sync.
It shows I have 8 active connections to the network but does not sync.
Block 10879 is the last block. That's the one you're on, right? If so, just leave your wallet open. It might just say out of sync because it's been awhile since the last block was generated.
This is current status of my wallet...

{
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10879,
"moneysupply" : 49506.06519900,
"connections" : 8,
"proxy" : "",
"ip" : "3aphugm42am7m6a3.onion",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
}
August 11, 2014, 10:52:14 AM
I did try the reserve balance thing but Im still stuck and wallet not synching.
It shows I have 8 active connections to the network but does not sync.
It shows I have 8 active connections to the network but does not sync.
Block 10879 is the last block. That's the one you're on, right? If so, just leave your wallet open. It might just say out of sync because it's been awhile since the last block was generated.
August 11, 2014, 10:47:54 AM
I did try the reserve balance thing but Im still stuck and wallet not synching.
It shows I have 8 active connections to the network but does not sync.
This is what shows at Bittrex.
Last checked:
08/11/2014 11:48:49 AM TRI 8.66026000 0 / 6
When I initially sent, it showed
TRI 8.66026000 1 / 6
I also had like 256 confirmations in my wallet on the transaction.
Then I saw the updated ANN and did the new steps to open the wallet and have been having issues and haven't been able to sync since.
It shows I have 8 active connections to the network but does not sync.
This is what shows at Bittrex.
Last checked:
08/11/2014 11:48:49 AM TRI 8.66026000 0 / 6
When I initially sent, it showed
TRI 8.66026000 1 / 6
I also had like 256 confirmations in my wallet on the transaction.
Then I saw the updated ANN and did the new steps to open the wallet and have been having issues and haven't been able to sync since.
August 11, 2014, 10:24:22 AM
I did a repair wallet and now have this...
Coins show back in my balance but also show pending at Bittrex.
{
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10879,
"moneysupply" : 49506.06519900,
"connections" : 2,
"proxy" : "",
"ip" : "0.0.0.0",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
}
Coins show back in my balance but also show pending at Bittrex.
{
"version" : "v3.3.4.4",
"protocolversion" : 70101,
"walletversion" : 60000,
"balance" : 8.66036000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 10879,
"moneysupply" : 49506.06519900,
"connections" : 2,
"proxy" : "",
"ip" : "0.0.0.0",
"difficulty" : 125.80864323,
"testnet" : false,
"keypoololdest" : 1405616421,
"keypoolsize" : 109,
"paytxfee" : 0.00000000,
"errors" : ""
}
If your coins didn't stake yet, can you try the reserve balance thing and then loadblock? You might have sent them on the wrong fork.
edit: Actually, I'm not sure why they would continue to show as pending unless the block you sent them on was orphaned. Either way, they should be back in your wallet.
Jump to: