Topic: [ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside! - page 12. (Read 13514 times)
April 22, 2018, 03:22:42 PM
The miner halts for no reason on one of my machines with 3 x 1080ti after a few shares sent/accepted.
April 22, 2018, 02:40:36 PM
2 my rigs 8*gtx 1060 don't start, what can I do to use this miner?
Dear Dr_Victor,
Could you please disable overclocks and run the latest zFastminer-v229 for 15 minutes and take print-screen without the quiet option('-q')?
I would like to see what the miner is showing.
Best Regards,
zFastminer team.
April 22, 2018, 02:27:08 PM
2 my rigs 8*gtx 1060 don't start, what can I do to use this miner?
April 22, 2018, 02:19:43 PM
MPH is currently not updating XZC site info. Top of the dashboard page states the following ....
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
Mph is back and zfastminer is still the best
Can you tell me if the memory clock 450 helps to get more speed on lyra2z?
I can’t find any improvement with MC,
Even if i put mc to -400 i get same speed ...
Thanks
Yep, your right. Put one of them at -400 MC a few hours ago and it seemed to have "no" effect on hashrate.
Initially I shifted from ccminer equihash to zfastminer and didn't change any settings much less fine tune afterburner for the lyra2z algorithm. Made a .bat and clicked .... everything worked so I went with it. Might try lowering PL and raising CC today if I find time.
April 22, 2018, 07:32:18 AM
well, I have mined with this miner for about a week I think, it was previouce version of the miner I think
I run it on 3 rigs, two rigs were 6 x gtx 1080ti rigs and one rig were 6x gtx 1070 rig
I can confirm that hashrate and income have grown.. which is a good side!
the bad side is that I have trided the miner on the rig with just two gtx 1070ti.. no luck, just a lot bad shares..
I run it on 3 rigs, two rigs were 6 x gtx 1080ti rigs and one rig were 6x gtx 1070 rig
I can confirm that hashrate and income have grown.. which is a good side!
the bad side is that I have trided the miner on the rig with just two gtx 1070ti.. no luck, just a lot bad shares..
Change the worker name to a new worker name and you will get only good shares ...
April 22, 2018, 06:46:53 AM
well, I have mined with this miner for about a week I think, it was previouce version of the miner I think
I run it on 3 rigs, two rigs were 6 x gtx 1080ti rigs and one rig were 6x gtx 1070 rig
I can confirm that hashrate and income have grown.. which is a good side!
the bad side is that I have trided the miner on the rig with just two gtx 1070ti.. no luck, just a lot bad shares..
I run it on 3 rigs, two rigs were 6 x gtx 1080ti rigs and one rig were 6x gtx 1070 rig
I can confirm that hashrate and income have grown.. which is a good side!
the bad side is that I have trided the miner on the rig with just two gtx 1070ti.. no luck, just a lot bad shares..
April 22, 2018, 06:30:14 AM
The miner fee is not an issue since your net income should increase by at least 20% compared to public lyra2z miners currently available.
The Fee amount will decrease with each new Release relative to comunity interest, it's just for helping us keep the development live and to contenue Optimizing zFastminer and other Algos too.
When you find great deal on product that is 20%~30% lower then the current market price, are you gonna cancel your order just because the retailer will not say to you what his commission rate on the purchase - do you?
We continue our work on this project and we will share with you any further improvement that we can achieve...
At this stage, the fee will help us to continue to support the improvement of the software, but even at this moment, Zcoin is the most profitable coin for mining with NVIDIA cards that we mentioned
April 22, 2018, 05:57:55 AM
MPH is currently not updating XZC site info. Top of the dashboard page states the following ....
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
Mph is back and zfastminer is still the best
Can you tell me if the memory clock 450 helps to get more speed on lyra2z?
I can’t find any improvement with MC,
Even if i put mc to -400 i get same speed ...
Thanks
April 21, 2018, 10:27:50 PM
MPH is back
April 21, 2018, 05:46:32 PM
MPH is currently not updating XZC site info. Top of the dashboard page states the following ....
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
let's hope it will not. Cause otherwise AMD will be the only cards to use to mine zcoin.
Anyway I've been able to withdraw the coin i've mined in the last few days to my wallet.
April 21, 2018, 05:03:43 PM
Finally i finished build my new rig 12x1080ti zotac blower,
3 psu x 1200w
Win10pro
Cpu -i5
16gb ram
240 gb m.2 ssd
Mb Asrock h110 pro btc+
Latest nvidia driver
Set pl 70
Core clock 70 (synchronized with msi afterburner), yes it’s support 12gpus)
Mc -0
I got 48mhs on zfastminer,
And on graph it’s showing over 70mhs...
Rig of 12 gpus, working great, fantastic speed !!!
I newer though that windows can handle more than 8 gpus, but it’s working excellent for me,
I have other 6x8x1080ti, i will add to them more gpus in near future,
One more time i want say,
many thank’s !!!
3 psu x 1200w
Win10pro
Cpu -i5
16gb ram
240 gb m.2 ssd
Mb Asrock h110 pro btc+
Latest nvidia driver
Set pl 70
Core clock 70 (synchronized with msi afterburner), yes it’s support 12gpus)
Mc -0
I got 48mhs on zfastminer,
And on graph it’s showing over 70mhs...
Rig of 12 gpus, working great, fantastic speed !!!
I newer though that windows can handle more than 8 gpus, but it’s working excellent for me,
I have other 6x8x1080ti, i will add to them more gpus in near future,
One more time i want say,
many thank’s !!!
April 21, 2018, 01:25:29 PM
MPH is currently not updating XZC site info. Top of the dashboard page states the following ....
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend
Makes me wonder if this miner is using some sort of exploit to increase hash rate and they are on to it.
Regardless ......
5x8x1080tis are @ 33.28-33.78 MH/s per rig
PL: 75
CC: 100
MC: 450
April 21, 2018, 11:41:36 AM
Rig 8 gtx 1060/3 win10 doesn't start (the latest drv). Stops after intensity detection.
April 21, 2018, 05:09:01 AM
Awesome miner man! the results speak for themselves!. Lyra2z was my favourite power efficient algo to mine. But it is very disheartening lately that an AMD vega can do 6mh+ while a 1080ti can only get 3-4mh.
April 21, 2018, 04:25:59 AM
Hello, that works great on my 1060gtx rigs, but i have a lot more AMD rigs why don't you make it for AMD too, there is a lot more AMD owners than Nvidia. It would be better for your wallet 
April 21, 2018, 03:04:49 AM
My result in last 24 hours with zfastminer-v229 without OC:
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
64gb virtual memory you mean the paging file?
What's the Power Limit set on your cards?
Whats the current hush rate showed by the miner?
thanks
Marco
Rig of 8x1080ti shows ~31.98 mhs on miner
In pool graph its 39-48 mhs
Yes, i set paging file to 64gb
Total speed on pool with all my 6x8x1080ti is ~ 270 mhs
Power limit set to 70, but i think even if i set to 100 it’s same speed and same watts ~ 160w per gpu...
Memory set to 0, core clock to 0,
thanks mate...same performance here... 6x1080ti shows 25 on miner. but actually I've got 135w per gpu showed by miner.
My paging file is 16gb and not 64gb, and my PL is set at 90 but still... never reaches it.
April 21, 2018, 03:02:15 AM
My result in last 24 hours with zfastminer-v229 without OC:
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
64gb virtual memory you mean the paging file?
What's the Power Limit set on your cards?
Whats the current hush rate showed by the miner?
thanks
Marco
Rig of 8x1080ti shows ~31.98 mhs on miner
In pool graph its 39-48 mhs
Yes, i set paging file to 64gb
Total speed on pool with all my 6x8x1080ti is ~ 270 mhs
Power limit set to 70, but i think even if i set to 100 it’s same speed and same watts ~ 160w per gpu...
Memory set to 0, core clock to 0,
April 21, 2018, 02:31:24 AM
My result in last 24 hours with zfastminer-v229 without OC:
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
64gb virtual memory you mean the paging file?
What's the Power Limit set on your cards?
Whats the current hush rate showed by the miner?
thanks
Marco
April 21, 2018, 01:44:35 AM
My result in last 24 hours with zfastminer-v229 without OC:
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
6x8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro
Edited:
Last 24 hours of mining i got 4.59 xzc
Its ~4.05 usd per gpu
Great job!!!
Many thank’s
April 20, 2018, 09:00:08 AM
Great...from 24.2MHs to 24.9 - 25.0 MH/s for 6x 1080ti
Still waiting for the API support
thanks a lot
Marco
Still waiting for the API support
thanks a lot
Marco
Jump to: