Topic: [ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside! - page 16. (Read 13550 times)

Hello

Miner works great!

Would you consider making the miner work on f2pool and zpool? I've had more consitent profit on f2pool. Seems like miningpoolhub  luck is always lower and yields less coins than f2pool?  Zpool also has criptoreal which is also lyra2z.

thanks

whats the difference between the 2.2.8.5 and the 2.2.8 in the first post?

thanks
Marco

Dear crocozino,
Yes, you are right, zFastminer only supports mining Lyra2z(Zcoin) on Miningpoolhub only.

Best Regards,
zFastminer team.

Thanks for your quick response.

so if I understood this right, this miner will work on minigpoolhub only?
other coins and other pools is not possible to mine with this miner?
or possible? please let me know

Dear cida ,
We are sorry to hear that, Did you overclocked the cards? if so please try to run without OC and see if it helps.
If not, you can try this version that we think may solve the problem and please report back.

zFastminer-V2285
https://file.fm/f/kevswzg2
Please update the .bat file:
zFastminer-V2285 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q

We got Rigs with 1070/1070TI/1080Ti with win10 and latest NVIDIA drivers and we are testing on them before release,
we did not encountered this problem with our 1070 rig.

Best Regards,
zFastminer team.

Not working for me too.

4x 1070 - Win 10 1709 - Nvidia driver 391.35
command line:
zFastminer-v228.exe -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u ***.**** -p x -q

Always abort after few moments with following output:

Hope this can help you.

Dear anatolikostis ,
We are sorry to hear that, unfortunetlly we don't have rigs with WIN 7 to test, could you please share the .bat you are using (without the -u name.)


Best Regards,
zFastminer team.

not working - win7 x64 geforce 391.24 4*1080ti
completely untested miner

Update April 10th: Updated version release: zFastminer-V2.2.8

• Added support for GTX 1060 3GB/6GB - please test only with full Rigs (single 1060 isn't fast enough) to get best result.
• Fixed "JSON decode failed(-1)"
• Minor bug fixes
• Quiet mode set to OFF by default, for cleaner stats display please use '-q' option at .bat file

zFastminer-V2.2.8 Most profitable miner for NVIDIA GPUs at this time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).

Download zFastminer-V2.2.8 link:

HAPPY MINING
zFastminer team.

Dear DonMaxim ,
We are happy to hear that, thank you

Best Regards,
zFastminer team.



Dear yvmen,
We just finished working on fixed version and testing it now,
we are planning to release it in a few hours,

Best Regards,
zFastminer team.

When I assume the optimization happens, I get JSON decode failed(-1):wrong arguments. happened about 15 min in on one rig and about 30 min on the other. then continues to mine at same speed. and keeps saying Json decode failed every so often.
Happening on 1080ti and 1080 rigs.



For what mention here ... i think is some problem .. u have to check out a bit i did saw the above of ur reply on it .. out of 40-45 rig i run thru it i find out .. 1 of them totally cant run .. whenever it run it shut down i not sure what is the really problem .. but no problem running ccminer 2.2.5 .. and with the json error .. is more of a problem i find out of them if the gpu have no problem handling it .. it can give u a high speed .. let say 1 line of hash 1 line of json error but i did found when there is like 4 or 5 line of json error .. meaning it doesnt kick in on the right time the hash is so much lower .. but usual one have not much problem ..

lastly i find it will run into error every 1-2 day so .. have to check on it quite often ..

yvmen

if you need some help to testing linux version you are more than welcome to send me PM...
i have rigs with 1060 too...

Dear djm34 ,
It's a great honor to have you here, "We" are 2 computer science students with little spare time :-).

Best Regards,
zFastminer team.

how many people is there behind that "we" ?

My test result in last 24 hours with zfastminer-v226 without OC:
8x1080ti Zotac AMP Extreme core edition
8gb ram 2400mhz
Cpu i5
120gb ssd (64gb virtual memory)
Win10pro

After 24 hours of mining i got 0.8241 xzc
Its ~3 usd per gpu

Many thank’s for sharing it,
Waiting for linux version

Dear friends and community members,
on this weekend we were working hard on our next release - zFastminer-V2.2.7 to fix the reported bugs, to add support for GTX 1060 3Gb/6GB, and testing Linux version for future release...

Pease keep in mind that testing with single GPU will not get you promised hashrate improvement.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.

_________________________________________________________________________



We saw that error on zFastminer v2.2.6 on our Rigs too, but it  was not effecting the hashrate.
We are working on fix and we will release new version ASAP.

Best Regards,
zFastminer team.

___________________________________________________________



We are enabling support for GTX 1060 3GB/6GB in the upcoming zFastminer v2.2.7 release, we cannot guarantee the same hashrate improvement, but you are welcome to test it and inform us, please test it on full mining Rig and not just single 1060.

Best Regards,
zFastminer team.

___________________________________________________________


Please let us know about your config, GPU model/Num of GPUs used.
Testing only with single GPU is not recommended since not all the optimization could be enabled.

Best Regards,
zFastminer team.

___________________________________________________________


Thank you for you Update, we are glad that you are satisfied, moreover to get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.

Best Regards,
zFastminer team.

___________________________________________________________


Dear St.Neman,
We are exited to read your comment, we worked very hard to bring this miner to this community, and comments like yours gives us the positive energy to continue the hard work.
Thank you!.

Best Regards,
zFastminer team.

___________________________________________________________



Thank you for your feedback, much appreciated!.
Hope you got every thing sorted out.

Best Regards,
zFastminer team.

___________________________________________________________


Dear NameTaken,
Linux version currently in test phase, We will release it ASAP,
We are also considering moving our Rigs to Linux instead WIN10.
Please follow the updates on this thread.

Best Regards,
zFastminer team.

___________________________________________________________




Dear rusty91,
We are sorry to hear that, we also agree with you about current situation with Windows10.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.
Linux version currently in test phase, We will release it ASAP,
We are also considering moving our Rigs to Linux instead WIN10.
Please follow the updates on this thread.

Best Regards,
zFastminer team.

Hello. What about sgminer optimized? For example rx480 1~1.5 Mh/s 

guys, long way ahead... I spent two days trying to figure out whether it will be worth switching over to windows and my answer so far is -> no. All my production rigs are running linux perfectly... My Win dev rig is currently showing literally no improvement, mostly because the app basically stops with no errors and automating anything in Windows is... just not my thing. It does show some crazy high kH/s, but MPH doesnt agree... I honestly can't tell lookling at the mph chart if there is any improvement over standard ccminer_cuda9 that I use on Windows. Sure - it shows 4100++ kH/s per 1080TI with +100MHz core bump, but I dont see any improvement on MPH side... See for yourself... it's been running like that since yesterday, somewhere mid day today I switched to 266... dual 1080TI:

https://wrzutnik.net/quattro/image.php?di=UXNC

Excited with that initial reporting I failed over one 6-card node to Win10RS3 and I was shocked how much resources it needs to run... (3 hours to deploy, constant nvidia drama, reboots taking minutes instead of seconds, logging on, UI penalty on headless machine, etc), then one thing hit me (I honestly forgot the experience, but all Windows 95 memories came back) - the thing starts with B... ends with luescreen... Two days wasted invested. Now time to earn money with good old ccminer-msvc2015...

I'll wait for stable ubuntu release...

Linux version?