Topic: [ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside! - page 19. (Read 13550 times)

linux alone has around 5 to 10% advantage over windows... (based on my own experience with 1080TIs)
testing on zFastminer on Win is giving me now 660+ kH/s advantage over ccminer (@win) 1080TI with 2000MHz clock, which is nice... Let's see what does the miningpoolhub say (in few hours).

It's in our "To Do" list.



1060 is not supported, GTX 1070 (15 SM) and its Mining models is the minimum requirement.
https://www.techpowerup.com/gpudb/2840/geforce-gtx-1070

Best Regards,
zFastminer team.

What about linux version?

?
1063 (drv 391.01 win 10)

Hello, do you plan to release linux version? it would be probably included in all linux distros for mining and made miner more popular!

The miner fee is not an issue since your net income should increase by at least 20% compared to public lyra2z miners  currently available.
The Fee amount will decrease with each new Release relative to comunity interest, it's just for helping us keep the development live and to contenue Optimizing zFastminer and other Algos too.
When you find great deal on product that is 20%~30% lower then the current market price, are you gonna cancel your order just because the retailer will not say to you what his commission rate on the purchase - do you?

We continue our work on this project and we will share with you any further improvement that we can achieve...
At this stage, the fee will help us to continue to support the improvement of the software, but even at this moment, Zcoin is the most profitable coin for mining with NVIDIA cards that we mentioned with our zFastminer...

Thanks' to everyone who started mining with our zFastminer software.
Follow this thread for updates about further improvements very soon ...

Hope you also will join our zFastminer software and enjoy it...

Best Regards,
zFastminer team.

I still don't see what the fee % is...

This version is limited to MiningPoolHub so it's indeed only for Zcoin,
if there will be other important lyra2z coin we will consider another version to support it.

happy mining

Best Regards,
zFastminer team.

Why only MPH?
Is it a lyra2z miner or a MPH-XZC miner?

will this work on other lyra2z shitcoins or is it strictly for xzc?

What is the fee %?

Also, i'll let others test this software first. Don't believe for a second this isn't malware until proven otherwise.

Dear friends and comunity memmbers,
Miningpoolhub's latest updates caused zFastminer to slow down due to the change in the initial difficulty from 5 to 30.
This change brought a lot of luck to the pool and we welcome that
Before we release a new updated version, please use another miner (like coolminer or ccminer...)

Happy Mining
zFastminer team.

_______________________________________________________________________________ _______________


[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin xzc Miner On Poolside For NVIDIA Pascal GPUs
***** Optimized For MiningPoolHub - Fork from tpruvot ccminer 2.2.5 *****


Update Jun 22th: New Version Release: zFastminer-v2.3.4

Dear friends and community memmbers,
This new update is highly recommended, we advise you all to update to zFastminer-v234 for Reduced Dev Fee 1.0%,
Nvidia Maxwell support(sm_52) and better stability.

Changelog:

• Dev Fee reduced to 1.0%.
• Added Nvidia Maxwell(sm_52) support.
• Removed the min number of GPU's, Now can run on 1 Gpu too.
• Bug Fixes for better stability.

Nvidia GeForce 397.31 WHQL and newer drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.0%).

Download zFastminer-v2.3.4

HAPPY MINING
zFastminer team.


_____________________________________________________________________


Update May 22th: New Version Release: zFastminer-v2.3.3

Dear friends and community memmbers,
This new update is highly recommended, we advise you to update to zFastminer-v233 for better speed (Miner & Pool), better stability and less power spikes...

Changelog:

• Improved kernel ~+5% speed improvement from previews version (v2.3.2)
• Miner can display now if blocks found - "...SharesAccepted:(6543/6543), BlocksFound:(1)..."
• MaxNonces found per kernel launch increased up-to 3 Nonces(work->nonces[2]).
• We reduced waiting time for our optimization to apply on miner launch.
• Another attempt to reduce power spikes from previous version.

Nvidia GeForce 397.31 WHQL and newer drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 7~15 minute after program start to avoid disabling our miner Fee (1.8%).


_____________________________________________________________________


Update May 4th: Updated Version Release: zFastminer-v2.3.2

Changelog:

• Fixed Stratum connection Bug.
• Added support for IP addresses as URL- please choose the best IP for you with the lowest ping.
• Attempt to reduce power spikes.
• Mining Rigs with less then 2 GPU's not Supported.
• Max GPU's support increased to 19 per Rig.
• '--hide-diff' is ON by default to reduce CPU usage.
• Small Reduction of the Intensity for better stability.
• Compiled with Cuda 9.2

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Regarding power spikes:
We have looked about this issue with ccminer and found out that some users found solution by using '-plimit' option to limit the max power usage of the GPU's(in addition to MSI afterburner), you can set values per GPU like this:

This sets 60% power limit for each GPU on a rig with 8 GPU's, try this option with your preferred power percentage

Regarding MPH ongoing maintenance and stratum connection issues:
We enabled using IP address as URL and now you can choose the best IP address with the lowest ping for you and you shouldn't have connection problem anymore.
For example:


List of IP addresses:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

How to Test Ping?:
Open command prompt/PowerShell and type:


And you will see something like that:


Keep trying different IP's or URL's MPH URL's or choose from this list and test the ping:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

us-east.lyra2z-hub.miningpoolhub.com  
europe.lyra2z-hub.miningpoolhub.com
asia.lyra2z-hub.miningpoolhub.com
Until you find best IP address with the lowest ping and then use it in your .bat file.
_____________________________________________________________________


Update April 26th: Updated Version Release: zFastminer-v2.3.0

Changelog:

• Compiled with Cuda 9.2
• Small changes to kernel +2% ~ +5% speed improvement from previews version (v2.2.9)
• Mining Rigs with less then 3 GPU's not Supported

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Start.bat example:
zFastminer-v230 -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q
zFastminer-v230 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q
zFastminer-v230 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q

______________________________________________________________________

Update April 19th: Updated Version Release: zFastminer-v2.2.9

Changelog:

Miner Fee reduced to 1.8%.
Small changes to kernel + Second Nonce is working now, while not using quiet option "-q" you gonna see message like this when Second Nonce found:"GPU #6: Found second Nonce: c1fa0d6f!"
Around 5% speed improvement on poolside.

zFastminer-v2.2.9 Most Powerful And Profitable Zcoin Miner For NVIDIA GPUs At This Time. TESTED AND VERIFIED!
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Please mine only with full Rigs - (single GTX 1060, 1070, 1070 TI, 1080, 1080 TI isn't fast enough) to get best result.
Use New WORKERNAME for this miner to fix rejected shares error.
______________________________________________________________________

Update April 14th: Updated Version Release: zFastminer-V2.2.85

Minor bug fixes - please mine only with full Rigs (single GTX 1060, 1070, 1070 TI, 1080, 1080 TI isn't fast enough) to get best result.

zFastminer-V2.2.85 Most Powerful And Profitable Zcoin Miner For NVIDIA GPUs At This Time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
Please use New WORKERNAME for this miner to fix rejected shares error.
_____________________________________________________________________

Update April 10th: Updated version release: zFastminer-V2.2.8

Added support for GTX 1060 3GB/6GB - please test only with full Rigs (single 1060 isn't fast enough) to get best result.
Fixed "JSON decode failed(-1)"
Minor bug fixes
Quiet mode set to OFF by default, for cleaner stats display please use '-q' option at .bat file

zFastminer-V2.2.8 Most profitable Zcoin miner for NVIDIA GPUs at this time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
_____________________________________________________________________

Update April 7th:
Dear friends and community members,
on this weekend we were working hard on our next release - zFastminer-V2.2.7 to fix the reported bugs, to add support for GTX 1060 3Gb/6GB, and testing Linux version for future release...

Please keep in mind that testing with single GPU will not get you promised hashrate improvement.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.
_____________________________________________________________________

Update April 7th:
Dear friends and community members,
on this weekend we were working hard on our next release - zFastminer-V2.2.7 to fix the reported bugs, to add support for GTX 1060 3Gb/6GB, and testing Linux version for future release...

Please keep in mind that testing with single GPU will not get you promised hashrate improvement.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.
_____________________________________________________________________

Update April 5th Updated version release: zFastminer-V2.2.6

Increased reported speed on pool
Added Volta SM_70 support
Miner Fee set to 2%
Minor bug fixes
Quiet mode set to ON by default for cleaner stats, use '-q' if you want to disable it
_____________________________________________________________________

[ANN] April 04, 2018

Dear Friends,
We are exited to announce our best Zcoin mining software for Rigs - zFastminer Version 2.2.6.
zFastminer has a highest hashrate on a poolside and optimized only for MiningPoolHub.
zFastminer works with nVidia Pascal/Volta GPUs with SM count >= 15.

Tested on Rigs with:
GTX 1070
GTX 1070 TI
GTX 1080
GTX 1080 TI - (8 GPU Rig Reports 33Mhs~48Mhs minimum on poolside on 24hr Graph)

Compiled with Cuda 9.1 (3rd patch) and SM 6.1(Pascal and Never GPUs, Please use current NVIDIA drivers with cuda 9.1 support).
Rigs with ~8 GPUS shows the best results!!!.

Important!!!
zFastminer will automatically calculate the best Intensity for each GPU based on it's SM count.
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee.
With zFastminer you should expect + 25%~35% increase in reported hash rate on poolside (MiningPoolHub).

Update:
Please use New WORKERNAME for this miner to fix rejected shares error.
_____________________________________________________________________


Downloads:

Download zFastminer-v2.3.4

Download zFastminer-v2.3.3

Download zFastminer-v2.3.2

Download zFastminer-v2.3.0

Download zFastminer-v2.2.9

Download zFastminer-V2.2.85

Download zFastminer-V2.2.8

Download zFastminer-V2.2.6


Happy mining from our zFastminer team