[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside! - page 18.

ekze

jr. member

Activity: 210

Merit: 6

Quote from: BitSoftGeek on April 05, 2018, 07:11:43 AM

All the sources can be found here:
https://github.com/tpruvot/ccminer

Feel Free to analyze/optimize/and analyze again and again until you will get the result you like Wink

.
We are not selling it, just sharing our optimized version that work the best for us, Feel free to try and report or keep using the current available miners, it a free world, the choise is yours :-).

Best Regards,

zFastminer team.

Please read https://github.com/tpruvot/ccminer/blob/windows/LICENSE.txt

TL;DR: You modify GPLv3 source - you are obliged to release the source of your work.

BitSoftGeek

newbie

Activity: 62

Merit: 0

All the sources can be found here:
https://github.com/tpruvot/ccminer

Feel Free to analyze/optimize/and analyze again and again until you will get the result you like Wink

.
We are not selling it, just sharing our optimized version that work the best for us, Feel free to try and report or keep using the current available miners, it a free world, the choise is yours :-).

Best Regards,
zFastminer team.

shinkei

newbie

Activity: 48

Merit: 0

Open-source software from djm and tpruvot, no sources available. SCAM!

ekze

jr. member

Activity: 210

Merit: 6

Care to share sources? You used open-source work from DJM and TPruvot. Not sharing sources is a license violation.

BitSoftGeek

newbie

Activity: 62

Merit: 0

Quote from: DES_MX on April 05, 2018, 05:38:08 AM

Tried this miner on overclocked titan Xp's rig, while it does perform ~600kh better per card, achieving 3800khash per card (21% better than other miners), it's nowhere near the stated33-39mhash per 8 Ti's (4500khash average).

This is in miner by the way. Pool didn't show boost after 2.5 hours running. Also seeing that the OP won't tell the fee, which leads to believe it is draconic, can't recommend right now

Thank you for your feedback,

Could you please tell me what was the speed on the Graph?
For reference- this is the graph of our Rig with 8 1080Ti(blower version):
https://s14.postimg.org/d045vwom9/z_Fastminerv225_x8_1080_Ti_Hash.jpg
Can you share the .Bat file parameters that you used?

Best Regards,
zFastminer team.

__________________________________________________________________________

Quote from: greml on April 05, 2018, 05:43:51 AM

Ok tried this miner now and it instantly crashes.

Thank you for your feedback,
I am sorry to hear that, Could you please share the .Bat file parameters that you used?
Or you can add "pause" to the .bat file and you will be able to see the error.

Quote from: xarix on April 05, 2018, 05:55:25 AM

I'm getting ''stratum authentication failed'' notice using bat file for EU, please help.

Thank you for your feedback,
Have you correctly set-up the .bat file with your Username and Worker?
is this happening only on EU server?

I also saw this error few time on the last days, I don't know what is going on on MPH right now.
can you check again and inform us?

Best Regards,
zFastminer team.

__________________________________________________________________________

Quote from: damniatx on April 05, 2018, 05:54:36 AM

new link ?

We are working on that, apparently even with paid premium account on megaupload.us/ you could not download files without crazy amount of Ads/Popup and etc' so we removed it.
Soon we will post new Mirror Links for download.

Best Regards,
zFastminer team.

xarix

newbie

Activity: 88

Merit: 0

Okay got it working, just one more question, will the actuall earnings match the increase in hashrate gain, or are we just filling up your wallets even more?

ginterh

newbie

Activity: 10

Merit: 0

Windows defender detected Trojan:Win32/Fuery.A!cl in the executable file

Is this a false positive?

xarix

newbie

Activity: 88

Merit: 0

I'm getting ''stratum authentication failed'' notice using bat file for EU, please help.

damniatx

member

Activity: 109

Merit: 10

new link ?

ekze

jr. member

Activity: 210

Merit: 6

Sources?

greml

member

Activity: 107

Merit: 10

Ok tried this miner now and it instantly crashes.

DES_MX

member

Activity: 216

Merit: 13

Tried this miner on overclocked titan Xp's rig, while it does perform ~600kh better per card, achieving 3800khash per card (21% better than other miners), it's nowhere near the stated33-39mhash per 8 Ti's (4500khash average).

This is in miner by the way. Pool didn't show boost after 2.5 hours running. Also seeing that the OP won't tell the fee, which leads to believe it is draconic, can't recommend right now

greml

member

Activity: 107

Merit: 10

Quote from: BitSoftGeek on April 05, 2018, 03:16:35 AM

Please read carefully what I have wrote:

Quote

your net income should increase by at least 20%

This reffers to the actual avarege reported hashrate on your pool side, not just the speed you see in the miner.

Feel free to test and report back after 24hr how our miner compares against other miners, we are sure you going to be pleased.

Best Regards,

zFastminer team.

Instead of writing a dozen posts with vague statements you just could say what the miner fee is.
People wanna know that and if you avoid to answer this, people won't trust you.

map_ua

copper member

Activity: 59

Merit: 2

Tg: @map_ua Discrod: vjmap#6929

MPH is constantly stealing our coins. Why do you do miner for this pool? can you make it for our pool? bsod.pw

St.Neman

newbie

Activity: 40

Merit: 0

Quote from: BitSoftGeek on April 05, 2018, 04:53:16 AM

Quote from: St.Neman on April 05, 2018, 04:40:20 AM

something is wrong with miner?
3x1080 ti rig on Miningpoolhub.com about 1 hour
to much rejected, invalid round shares

Thank you for your feedback.
I have just checked our Rigs, all seem ok, But I have seen this behavior on the last days, (MPH is under attack?) on some coins- maybe this the coz?

The solution that we found was to simply add new ".WORKERNAME" and point the miner to this new worker.
So just do the following and tells us if the problem gone:
Change this :
-u USERNAME.OldWorkerName
with your NewWorkerName
-u USERNAME.NewWorkerName

Best Regards,

zFastminer team.

Done!
I will tell you soon
Thanks for quick response

Best regards !

BitSoftGeek

newbie

Activity: 62

Merit: 0

Quote from: St.Neman on April 05, 2018, 04:40:20 AM

something is wrong with miner?
3x1080 ti rig on Miningpoolhub.com about 1 hour
to much rejected, invalid round shares

Thank you for your feedback.
I have just checked our Rigs, all seem ok, But I have seen this behavior on the last days, (MPH is under attack?) on some coins- maybe this the coz?

The solution that we found was to simply add new ".WORKERNAME" and point the miner to this new worker.
So just do the following and tells us if the problem gone:
Change this :
-u USERNAME.OldWorkerName
with your NewWorkerName
-u USERNAME.NewWorkerName

Best Regards,
zFastminer team.

rusty91

newbie

Activity: 21

Merit: 0

custom intensity? Wink

St.Neman

newbie

Activity: 40

Merit: 0

something is wrong with miner?
3x1080 ti rig on Miningpoolhub.com about 1 hour
to much rejected, invalid round shares

BitSoftGeek

newbie

Activity: 62

Merit: 0

Please read carefully what I have wrote:

Quote

your net income should increase by at least 20%

This reffers to the actual avarege reported hashrate on your pool side, not just the speed you see in the miner.
Feel free to test and report back after 24hr how our miner compares against other miners, we are sure you going to be pleased.

Best Regards,
zFastminer team.

mcetin35

newbie

Activity: 28

Merit: 0

Quote from: BitSoftGeek on April 05, 2018, 01:59:36 AM

Quote from: EdgeOfSanity on April 04, 2018, 05:58:10 PM

I still don't see what the fee % is...

The miner fee is not an issue since your net income should increase by at least 20% compared to public lyra2z miners currently available.
The Fee amount will decrease with each new Release relative to comunity interest, it's just for helping us keep the development live and to contenue Optimizing zFastminer and other Algos too.
When you find great deal on product that is 20%~30% lower then the current market price, are you gonna cancel your order just because the retailer will not say to you what his commission rate on the purchase - do you?

We continue our work on this project and we will share with you any further improvement that we can achieve...
At this stage, the fee will help us to continue to support the improvement of the software, but even at this moment, Zcoin is the most profitable coin for mining with NVIDIA cards that we mentioned with our zFastminer...

Thanks' to everyone who started mining with our zFastminer software.
Follow this thread for updates about further improvements very soon ...

Hope you also will join our zFastminer software and enjoy it...

If that +20% goes to developer, than there is no point to use it.. you guys should implement the exact number here.

Topic: [ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside! - page 18. (Read 13550 times)