[ANN][0.8.6] Hirocoin - X11 - NGW - Secured Blockchain - Time Warp Limitation - page 114.

vlieg

newbie

Activity: 59

Merit: 0

Quote from: matauc12 on March 24, 2014, 09:50:23 AM

Quote from: vlieg on March 24, 2014, 09:05:18 AM

Quote

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192

I found that most rigs need the setx parameters with X11 despite lower thread concurrency (for scrypt you only need it with high thread concurrency)

This wil give me still hardware errors with a speed of about 1Mh/s per gpu card.

The other setting:

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u HrqxJyeguRvFcGU.1 -p x -I 13 -g 2 -w 400 --lookup-gap 2 --thread-concurrency 8192

also give hardware errors but much much more speed. about 2.2 Mh/s per gpu.

Don't know what i have to change Sad

also don't know what speed is acceptable at the moment.

it seems odd that you get pretty much spot on the mhs but with errors (would usually be much lower or much higher). Do you mind posting a screenshot of sgminer running?

Also, did you add the setx parameters?

Also add --gpu-engine 1040 --gpu-memclock 1400

i will let it run including your 1040/1400 . and keep it running a few hours. will post later this day.
tnx in adance.

EDIT POST:
with --gpu-engine 1040 --gpu-memclock 1400 included, the program will not start.

cgminer-o

sr. member

Activity: 350

Merit: 250

1$ =1 MEC 2013 (2,56 $) 5$ =1MEC 2014 ?

Is this good ?

7950 = 1.750 MH
280x = 2.000 MH

matauc12

hero member

Activity: 658

Merit: 500

Quote from: vlieg on March 24, 2014, 09:05:18 AM

Quote

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192

I found that most rigs need the setx parameters with X11 despite lower thread concurrency (for scrypt you only need it with high thread concurrency)

This wil give me still hardware errors with a speed of about 1Mh/s per gpu card.

The other setting:

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u HrqxJyeguRvFcGU.1 -p x -I 13 -g 2 -w 400 --lookup-gap 2 --thread-concurrency 8192

also give hardware errors but much much more speed. about 2.2 Mh/s per gpu.

Don't know what i have to change Sad

also don't know what speed is acceptable at the moment.

it seems odd that you get pretty much spot on the mhs but with errors (would usually be much lower or much higher). Do you mind posting a screenshot of sgminer running?

Also, did you add the setx parameters?

Also add --gpu-engine 1040 --gpu-memclock 1400

ShXnot

sr. member

Activity: 322

Merit: 250

hey guys,
anyone here using hd 7950?

im getting 1.8 m/h with this settings
sgminer.exe -k darkcoin -o stratum+tcp://pool -u user -p password -I 18 -g 4 -w 128

and also with this tweaks
core voltage 1100
core clock 1100
memory clock 1550

is 1.8m/h normal for this card?
thanks

vlieg

newbie

Activity: 59

Merit: 0

Quote from: cgminer-o on March 24, 2014, 09:19:52 AM

Hirocoin ?

yes

cgminer-o

sr. member

Activity: 350

Merit: 250

1$ =1 MEC 2013 (2,56 $) 5$ =1MEC 2014 ?

Hirocoin ?

vlieg

newbie

Activity: 59

Merit: 0

Quote

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192

I found that most rigs need the setx parameters with X11 despite lower thread concurrency (for scrypt you only need it with high thread concurrency)

This wil give me still hardware errors with a speed of about 1Mh/s per gpu card.

The other setting:

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u HrqxJyeguRvFcGU.1 -p x -I 13 -g 2 -w 400 --lookup-gap 2 --thread-concurrency 8192

also give hardware errors but much much more speed. about 2.2 Mh/s per gpu.

Don't know what i have to change Sad

also don't know what speed is acceptable at the moment.

matauc12

hero member

Activity: 658

Merit: 500

Quote from: HiroS on March 24, 2014, 05:58:03 AM

Quote from: tricass on March 24, 2014, 05:23:01 AM

new to hiro coin and loving the reduced power consumption and temps! running a version of sph-sgminer but it doesn't display temp or fan readings. i'm using cgwatch and can see the temps are much lower but its painful having to toggle between gpu cards. is there something i need to do to get this displaying? i've got 280x and 290 rigs mining hiro atm and both are having the same problem. the 280x has the dvd-i cross over plug and the 290 are connected to a monitor. any ideas would be great.

Please try the latest Badman miners from the post below. On my computer they show all the details for my card.

https://bitcointalk.org/index.php?topic=475795.0;all

Quote from: mikk2k2 on March 24, 2014, 05:54:38 AM

HIRO over HIC. Hiros can you look into getting this altered please?

We can do this in the next release however financial markets use three letters as far as I know. I did check Cryptsy to make sure there was no conflict but did not check more than that. Perhaps we compete with Hawaiicoin for use of HIC?

symbols are 3 or 4 letters

matauc12

hero member

Activity: 658

Merit: 500

Try

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192

I found that most rigs need the setx parameters with X11 despite lower thread concurrency (for scrypt you only need it with high thread concurrency)

Fastpow

full member

Activity: 322

Merit: 102

Quote from: vlieg on March 24, 2014, 07:36:50 AM

Quote

intensity for 280x should be set to 13
try deleting the shaders parameter to see if that fixes the HW issues

After deleting shaders, i still have got some hw errors.
Also I changed the intensity from 13 to 12 to 11, but every time i have harware errors.

Mining ultracoin with the following settings, without hw errors:

Code:

ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u x.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -g 2 -I 12 --lookup-gap 3 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --expiry 1 --queue 0 --no-submit-stale

And doge also with no hardware errors:

Code:

sgminer.exe -o stratum+tcp://eu.multipool.us:3352 -u x.1 -p x -I 13 --thread-concurrency 8192 -g 2 -w 256 --shaders 2048 --gpu-engine 1170 --gpu-memclock 1825 --temp-cutoff 87 --temp-target 77 --auto-fan

No luck this coin

with these settings:

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2

Try changing your -w to 400 and I 13 should work just fine

vlieg

newbie

Activity: 59

Merit: 0

Quote

intensity for 280x should be set to 13
try deleting the shaders parameter to see if that fixes the HW issues

After deleting shaders, i still have got some hw errors.
Also I changed the intensity from 13 to 12 to 11, but every time i have harware errors.

Mining ultracoin with the following settings, without hw errors:

Code:

ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u x.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -g 2 -I 12 --lookup-gap 3 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --expiry 1 --queue 0 --no-submit-stale

And doge also with no hardware errors:

Code:

sgminer.exe -o stratum+tcp://eu.multipool.us:3352 -u x.1 -p x -I 13 --thread-concurrency 8192 -g 2 -w 256 --shaders 2048 --gpu-engine 1170 --gpu-memclock 1825 --temp-cutoff 87 --temp-target 77 --auto-fan

No luck this coin

with these settings:

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2

HiroS

full member

Activity: 140

Merit: 100

Quote from: Fastpow on March 24, 2014, 06:20:45 AM

Thanks for the quick answer, cleared some things up.

Another question, is there a post/topic somewhere with optimized settings for 280x cards?

Take a look here and please contribute if you get better settings.

https://www.hirocoin.org/forum/index.php?topic=17.0

tricass

sr. member

Activity: 394

Merit: 250

Crypto enthusiast

Quote from: HiroS on March 24, 2014, 05:58:03 AM

Quote from: tricass on March 24, 2014, 05:23:01 AM

new to hiro coin and loving the reduced power consumption and temps! running a version of sph-sgminer but it doesn't display temp or fan readings. i'm using cgwatch and can see the temps are much lower but its painful having to toggle between gpu cards. is there something i need to do to get this displaying? i've got 280x and 290 rigs mining hiro atm and both are having the same problem. the 280x has the dvd-i cross over plug and the 290 are connected to a monitor. any ideas would be great.

Please try the latest Badman miners from the post below. On my computer they show all the details for my card.

https://bitcointalk.org/index.php?topic=475795.0;all

Quote from: mikk2k2 on March 24, 2014, 05:54:38 AM

HIRO over HIC. Hiros can you look into getting this altered please?

We can do this in the next release however financial markets use three letters as far as I know. I did check Cryptsy to make sure there was no conflict but did not check more than that. Perhaps we compete with Hawaiicoin for use of HIC?

tried and it does show the stats but hash rates are slightly lower than the current sgminer i'm using - http://dark.suchpool.pw/sph-sgminer-win.zip
i lose around around 90mhs per card on my 280x's so 2.050mhs instead of 2.130mhs but wu seem to settle around a similar figure of 0.080/m which is bit strange considering 240mhs is not contributing much submitted shared. i might try running with it for now.

thanks for the quick response!

Fastpow

full member

Activity: 322

Merit: 102

Quote from: HiroS on March 24, 2014, 06:19:06 AM

Quote from: Fastpow on March 24, 2014, 06:13:08 AM

I like the fact that my GPU''s run cooler alot. Just wondering, does this coin really bring something new when comparing it to darkcoin?

I do think that we will be the more popular choice for miners over Darkcoin as they use inverse difficulty reward, so the higher the difficulty the lower the coin reward. We could also be a more popular choice for merchants as we have automatic checkpointing to safeguard against 51% attacks aiming to reverse transaction. One of our keys goals is to be very secure.

Check the first post for the complete list of work done and if you are a coder go look at the commit history on GitHub to see that we have meticulously coded Hirocoin setting it above the majority of coins that get launched. Hirocoin is a long term project but with 100MH ASICs expected in Q2/Q3 we may see our popularity rising much soon er than that

Thanks for the quick answer, cleared some things up.

Another question, is there a post/topic somewhere with optimized settings for 280x cards?

HiroS

full member

Activity: 140

Merit: 100

Quote from: Fastpow on March 24, 2014, 06:13:08 AM

I like the fact that my GPU''s run cooler alot. Just wondering, does this coin really bring something new when comparing it to darkcoin?

I do think that we will be the more popular choice for miners over Darkcoin as they use inverse difficulty reward, so the higher the difficulty the lower the coin reward. We could also be a more popular choice for merchants as we have automatic checkpointing to safeguard against 51% attacks aiming to reverse transaction. One of our keys goals is to be very secure.

Check the first post for the complete list of work done and if you are a coder go look at the commit history on GitHub to see that we have meticulously coded Hirocoin setting it above the majority of coins that get launched. Hirocoin is a long term project but with 100MH ASICs expected in Q2/Q3 we may see our popularity rising much soon er than that

Fastpow

full member

Activity: 322

Merit: 102

I like the fact that my GPU''s run cooler alot. Just wondering, does this coin really bring something new when comparing it to darkcoin?

tricass

sr. member

Activity: 394

Merit: 250

Crypto enthusiast

thanks! i've give it a go...

HiroS

full member

Activity: 140

Merit: 100

Quote from: tricass on March 24, 2014, 05:23:01 AM

new to hiro coin and loving the reduced power consumption and temps! running a version of sph-sgminer but it doesn't display temp or fan readings. i'm using cgwatch and can see the temps are much lower but its painful having to toggle between gpu cards. is there something i need to do to get this displaying? i've got 280x and 290 rigs mining hiro atm and both are having the same problem. the 280x has the dvd-i cross over plug and the 290 are connected to a monitor. any ideas would be great.

Please try the latest Badman miners from the post below. On my computer they show all the details for my card.

https://bitcointalk.org/index.php?topic=475795.0;all

Quote from: mikk2k2 on March 24, 2014, 05:54:38 AM

HIRO over HIC. Hiros can you look into getting this altered please?

We can do this in the next release however financial markets use three letters as far as I know. I did check Cryptsy to make sure there was no conflict but did not check more than that. Perhaps we compete with Hawaiicoin for use of HIC?

mikk2k2

full member

Activity: 126

Merit: 100

HIRO over HIC. Hiros can you look into getting this altered please?

Klacik

member

Activity: 252

Merit: 10

Quote from: Acidyo on March 20, 2014, 09:03:11 AM

This coin has awoken my interest.

+1

Topic: [ANN][0.8.6] Hirocoin - X11 - NGW - Secured Blockchain - Time Warp Limitation - page 114. (Read 271675 times)