X11 is the best algo. Why more coins don't use it I will never understand.
It is not bad I must say indeed!
This is very interesting coin and I am believing it will get some success!
Topic: [ANN][0.8.6] Hirocoin - X11 - NGW - Secured Blockchain - Time Warp Limitation - page 74. (Read 271697 times)
April 02, 2014, 05:20:29 PM
It is not bad I must say indeed!
This is very interesting coin and I am believing it will get some success!
April 02, 2014, 04:27:07 PM
I tried a lot of conf for my r9 290 but after some time has passed the sgminer reports that both cards are dead. Can anybody suggest a solution? What i'm doing wrong?
Does this play a big role in the hashrate "no-pool-disable" : true,
Thanks in advance
Code:
"kernel" : "darkcoin",
"auto-fan" : true,
"gpu-fan" : "30-60",
"intensity" : "20",
"temp-target" : "75",
"temp-overheat" : "82",
"temp-cutoff" : "90",
"thread-concurrency" : "32765",
"gpu-threads" : "2",
"worksize" : "512",
"gpu-engine" : "1050",
"gpu-memclock" : 1250
I also use msi afterburner with powertune +30
"auto-fan" : true,
"gpu-fan" : "30-60",
"intensity" : "20",
"temp-target" : "75",
"temp-overheat" : "82",
"temp-cutoff" : "90",
"thread-concurrency" : "32765",
"gpu-threads" : "2",
"worksize" : "512",
"gpu-engine" : "1050",
"gpu-memclock" : 1250
I also use msi afterburner with powertune +30
Does this play a big role in the hashrate "no-pool-disable" : true,
Thanks in advance
For my r290x I use this string to launch sgminer and get about 2.52mh per card:
sgminer -k darkcoin -o stratum+tcp://pool.com:port -u user.1 -p x -g 4 -w 128 -I 16 --no-submit-stale
April 02, 2014, 04:05:14 PM
hirocoin p2pool in Israel
not protected against DDOS, no redundancy
usually stable
runs on my ancient PC
0% fee
donations: HBjAoVHW75FCA1j37rr7qj9Gig7Jj1qNbn
http://hiro-il.zapto.org:9408/static/
not protected against DDOS, no redundancy
usually stable
runs on my ancient PC
0% fee
donations: HBjAoVHW75FCA1j37rr7qj9Gig7Jj1qNbn
http://hiro-il.zapto.org:9408/static/
April 02, 2014, 03:48:49 PM
X11 is the best algo. Why more coins don't use it I will never understand.
April 02, 2014, 03:38:40 PM
Yes darkcoin is the only other. Definitely not mint or black coin.
April 02, 2014, 03:36:59 PM
Great pool, its what I'm on. But best change your advert now its on 0.5% (very low!) Fee. Thanks
April 02, 2014, 03:24:43 PM
I tried a lot of conf for my r9 290 but after some time has passed the sgminer reports that both cards are dead. Can anybody suggest a solution? What i'm doing wrong?
Does this play a big role in the hashrate "no-pool-disable" : true,
Thanks in advance
Code:
"kernel" : "darkcoin",
"auto-fan" : true,
"gpu-fan" : "30-60",
"intensity" : "20",
"temp-target" : "75",
"temp-overheat" : "82",
"temp-cutoff" : "90",
"thread-concurrency" : "32765",
"gpu-threads" : "2",
"worksize" : "512",
"gpu-engine" : "1050",
"gpu-memclock" : 1250
I also use msi afterburner with powertune +30
"auto-fan" : true,
"gpu-fan" : "30-60",
"intensity" : "20",
"temp-target" : "75",
"temp-overheat" : "82",
"temp-cutoff" : "90",
"thread-concurrency" : "32765",
"gpu-threads" : "2",
"worksize" : "512",
"gpu-engine" : "1050",
"gpu-memclock" : 1250
I also use msi afterburner with powertune +30
Does this play a big role in the hashrate "no-pool-disable" : true,
Thanks in advance
intensity is too high!
April 02, 2014, 03:17:33 PM
I tried a lot of conf for my r9 290 but after some time has passed the sgminer reports that both cards are dead. Can anybody suggest a solution? What i'm doing wrong?
Does this play a big role in the hashrate "no-pool-disable" : true,
Thanks in advance
Code:
"kernel" : "darkcoin",
"auto-fan" : true,
"gpu-fan" : "30-60",
"intensity" : "20",
"temp-target" : "75",
"temp-overheat" : "82",
"temp-cutoff" : "90",
"thread-concurrency" : "32765",
"gpu-threads" : "2",
"worksize" : "512",
"gpu-engine" : "1050",
"gpu-memclock" : 1250
I also use msi afterburner with powertune +30
"auto-fan" : true,
"gpu-fan" : "30-60",
"intensity" : "20",
"temp-target" : "75",
"temp-overheat" : "82",
"temp-cutoff" : "90",
"thread-concurrency" : "32765",
"gpu-threads" : "2",
"worksize" : "512",
"gpu-engine" : "1050",
"gpu-memclock" : 1250
I also use msi afterburner with powertune +30
Does this play a big role in the hashrate "no-pool-disable" : true,
Thanks in advance
April 02, 2014, 03:02:57 PM
What coin used X11 first?
Darkcoin was the first! April 02, 2014, 03:02:05 PM
Wasnt it mintcoin?
April 02, 2014, 02:56:51 PM
April 02, 2014, 02:55:48 PM
What coin used X11 first?
April 02, 2014, 02:35:30 PM
http://poolz.eu:9408 - I am running a P2Pool node in Europe :
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
1% fee
How to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random password
Highlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.
You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate.
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
1% fee
How to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random password
Highlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.
You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate.
April 02, 2014, 10:31:56 AM
Suprnova Pool here:
https://hiro.suprnova.cc
Currently no fee with Vdiff + Stratum
Idle Worker Notifs, DDoS protected/Load balanced and all the goodies you need.
Get your Hiro's and don't forget to withdraw them !!
April 02, 2014, 09:44:45 AM
The first edition of Hironews has been published !
Full of the latest developments in the Hirocoin community, open bounties, fun stuff and serious business.
Bitcointalk thread
Hirocoin.org thread
EDIT if you guys could bump the thread a bit with good discussion that would be awesome
Full of the latest developments in the Hirocoin community, open bounties, fun stuff and serious business.
Bitcointalk thread
Hirocoin.org thread
EDIT if you guys could bump the thread a bit with good discussion that would be awesome
April 02, 2014, 09:29:00 AM
cant wait to see the 0.9 codebase in action 
April 02, 2014, 09:27:06 AM
So far Nite69 has not given a name to the new version of KGW. Any ideas as to what it should be?
Event Horizon
Singularity
Magnetic Power Inversion
( ok going overboard now, to much espressooo ahhaaarrrrrrrr )
TransWarp
(Yeah, I'm a trekkie
) April 02, 2014, 09:25:16 AM
So far Nite69 has not given a name to the new version of KGW. Any ideas as to what it should be?
Event Horizon
Singularity
Magnetic Power Inversion
( ok going overboard now, to much espressooo ahhaaarrrrrrrr )
April 02, 2014, 09:22:22 AM
The first edition of Hironews has been published !
Full of the latest developments in the Hirocoin community, open bounties, fun stuff and serious business.
Bitcointalk thread
Hirocoin.org thread
Full of the latest developments in the Hirocoin community, open bounties, fun stuff and serious business.
Bitcointalk thread
Hirocoin.org thread
Retweeted it
April 02, 2014, 08:25:50 AM
Guys - use P2Pool. It's completely decentralised by nature! You can use it even if you have barely 100kh/s, which is nothing in terms of X11 hashing.
Here's my node, which has 0% fees for nearly 1 whole month from now.
With P2Pool you get the following benefits:
The ONLY downside is the 24 hour share chain - this means that over the first 24 hours of mining your payments will ramp up to your final amount, but this doesn't mean you lose out on anything, because for 24 hours after you finish mining you get payouts that make up for it.
Seriously, I don't know why more people aren't using P2Pool. If you run a 24/7 miner and aren't using it you're hurting your own profits.
I'll even help others set up their own nodes to help us all secure the network. Just join #n00bsys0p on Freenode, or use the built in chat on any of my p2pool nodes.
Please do ask if anybody has any more questions...
EDIT: To use my p2pool node configure your miner as follows:
Pool URL: stratum+tcp://hiro.p2pool.n00bsys0p.co.uk:9408
User: Your wallet address
Password: Anything you like because P2Pool ignores it
You DO NOT need to set up workers, so if you have a few miners that have about the same power you can happily use the same address for all of them.
You should see your payments start to come in fairly fast. P2Pool on HIRO is finding blocks way more than once an hour.
Here's my node, which has 0% fees for nearly 1 whole month from now.
With P2Pool you get the following benefits:
- Transaction fees are paid to miners so you get payouts just as high as solo mining
- It almost completely avoids a 51% attack
- You don't have to trust a centralised server, as payments go directly into your own wallet!
- You can set up failover nodes so that you don't lose any shares if that one goes down. The share chain is shared across ALL P2Pool nodes.
The ONLY downside is the 24 hour share chain - this means that over the first 24 hours of mining your payments will ramp up to your final amount, but this doesn't mean you lose out on anything, because for 24 hours after you finish mining you get payouts that make up for it.
Seriously, I don't know why more people aren't using P2Pool. If you run a 24/7 miner and aren't using it you're hurting your own profits.
I'll even help others set up their own nodes to help us all secure the network. Just join #n00bsys0p on Freenode, or use the built in chat on any of my p2pool nodes.
Please do ask if anybody has any more questions...
EDIT: To use my p2pool node configure your miner as follows:
Pool URL: stratum+tcp://hiro.p2pool.n00bsys0p.co.uk:9408
User: Your wallet address
Password: Anything you like because P2Pool ignores it
You DO NOT need to set up workers, so if you have a few miners that have about the same power you can happily use the same address for all of them.
You should see your payments start to come in fairly fast. P2Pool on HIRO is finding blocks way more than once an hour.
Jump to: