Can I continue to exploit the old chain?
And I see Nova after the maintenance time, the address on the wallet is recorded Amsterdamcoin (old chain).
Can I continue to use this address to withdraw the AMS when exploiting the old chain?
Topic: [ANN][AMS] AmsterdamCoin™ | 100% PoS, Masternodes, Obfuscation, Seesaw - page 111. (Read 272368 times)
September 06, 2017, 12:25:36 PM
September 06, 2017, 12:23:16 PM
29 masternodes online now. (2.900.000 AMS)
I tested deposit and withdrawal on yobit and it's blazing fast.
I tested deposit and withdrawal on yobit and it's blazing fast.
September 06, 2017, 11:31:10 AM
Hey, at the moment you can only stake if you have a masternode running, is this correct? As in, you can't stake just by unlocking your wallet for staking?
Staking (PoS) is not active at the moment. It will become active after the PoW phase.
September 06, 2017, 11:28:44 AM
Hey, at the moment you can only stake if you have a masternode running, is this correct? As in, you can't stake just by unlocking your wallet for staking?
September 06, 2017, 10:48:10 AM
noob question,
my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
When I had a MN on the old chain and was solo mining I got blocks like this It may have something to do with that but I'm not sure.my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
i still have 0 connection but its still online ??
what must i do
Try to delete all files in the data folder except the wallet.dat and masternode.conf file. Let it resync for a minute and you should be fine. Never seen it before.
i kept the files ( wallet.dat and mn.conf and wallet conf.) and its doesnt sync now at all?
, gonna wait for a few hours , lets see what happens .....before i saw this, but its was giving coins ( approx. 6 a 7,5 per hour)
edit:
i think its working now , its now resynced with 3 active conection
and 29 masternodes nice .....
September 06, 2017, 10:45:57 AM
I understand correctly that on Yobit already have swapped the swap and coins there already a new chain?
and on other exchanges coins of the old chain?
and on other exchanges coins of the old chain?
That is 100% correct. CoinExchange will swap on september 14. Novaexchange is preparing.
September 06, 2017, 07:56:32 AM
I understand correctly that on Yobit already have swapped the swap and coins there already a new chain?
and on other exchanges coins of the old chain?
and on other exchanges coins of the old chain?
September 06, 2017, 07:02:41 AM
100k is the amt you need.
here is a guide for you.
1. Go to Tools -> Debug console and enter the command "masternode genkey".
2. Get account address from main wallet.
In Debug Console enter the command "getaccountaddress MyMasternode".
3. send exactly 100 000 AMS to the address generated in Step 2.
4. Get the proof of transaction in main wallet.
Enter "masternode outputs" and copy the output to the notepad. This is the proof of the transaction.
5. Update masternode.conf in main computer.
Open masternode.conf in the main computer (should be under AppData/AMS folder) and update it as below.
It should look something like this
MN1 IP:50020 PRIVATEKEY 918e5dfa....118093b 0
6. update AMS.conf file as below.
rpcuser=long random username
rpcpassword=longer random password
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1
maxconnections=256
masternode=1
externalip=your unique public ip address:50020
bind=your unique public ip address:50020
masternodeaddr=your unique public ip address:50020
masternodeprivkey= Masternode private key output from Step 1
7. Restart wallet
8. In Masternode tab make sure to activate your MN.
here is a guide for you.
1. Go to Tools -> Debug console and enter the command "masternode genkey".
2. Get account address from main wallet.
In Debug Console enter the command "getaccountaddress MyMasternode".
3. send exactly 100 000 AMS to the address generated in Step 2.
4. Get the proof of transaction in main wallet.
Enter "masternode outputs" and copy the output to the notepad. This is the proof of the transaction.
5. Update masternode.conf in main computer.
Open masternode.conf in the main computer (should be under AppData/AMS folder) and update it as below.
It should look something like this
MN1 IP:50020 PRIVATEKEY 918e5dfa....118093b 0
6. update AMS.conf file as below.
rpcuser=long random username
rpcpassword=longer random password
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1
maxconnections=256
masternode=1
externalip=your unique public ip address:50020
bind=your unique public ip address:50020
masternodeaddr=your unique public ip address:50020
masternodeprivkey= Masternode private key output from Step 1
7. Restart wallet
8. In Masternode tab make sure to activate your MN.
Superb Fishmaster42, it's always good to experience support like this! Keep it up.
September 06, 2017, 07:00:56 AM
actual nodes?
Nodes are included in the wallet by default:
nl-1.amsterdamcoin.com
us-1.amsterdamcoin.com
us-2.amsterdamcoin.com
eu-1.amsterdamcoin.com
eu-2.amsterdamcoin.com
asia-1.amsterdamcoin.com
September 06, 2017, 06:56:50 AM
actual nodes?
September 06, 2017, 03:16:02 AM
noob question,
my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
When I had a MN on the old chain and was solo mining I got blocks like this It may have something to do with that but I'm not sure.my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
i still have 0 connection but its still online ??
what must i do
Try to delete all files in the data folder except the wallet.dat and masternode.conf file. Let it resync for a minute and you should be fine. Never seen it before.
thx for th reply, i shall try it later
September 06, 2017, 02:53:50 AM
I want to invest in this coin
How much now brings one MN of income per day?
Are there any prospects for a rise in the value of the coin?
How much now brings one MN of income per day?
Are there any prospects for a rise in the value of the coin?
September 06, 2017, 02:26:44 AM
noob question,
my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
When I had a MN on the old chain and was solo mining I got blocks like this It may have something to do with that but I'm not sure.my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
i still have 0 connection but its still online ??
what must i do
Try to delete all files in the data folder except the wallet.dat and masternode.conf file. Let it resync for a minute and you should be fine. Never seen it before.
September 06, 2017, 02:26:15 AM
Announcement
Yobit has just swapped to the new blockchain. Deposits and withdrawals are enabled.
cool , so the wallet is active ( on yobit ) again, and its the new blockchain also...
good work Kees
September 06, 2017, 02:24:10 AM
noob question,
my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
When I had a MN on the old chain and was solo mining I got blocks like this It may have something to do with that but I'm not sure.my mn shows me earning of 0.075 AMS , while before it was ALWAYS 1.5 ams
i have 0 connection ?? still my mn is online ??
when i restarted the wallet it does toke his time to come online ??
i still have 0 connection but its still online ??
what must i do
September 06, 2017, 01:28:10 AM
Glad yobit switched out finally. I didn't think it would happen to be honest.
September 06, 2017, 01:12:45 AM
Today answered tech support yobit.
After 28 days after the ticket was created
28 !!!
about the fact that they blocked coins of clients under the fictitious pretext of moving from the storage.
For a month they took my bought coins, they either traded or used them in MN and a month later they returned nothing without explaining
Here is a "stock exchange"
After 28 days after the ticket was created
28 !!!
about the fact that they blocked coins of clients under the fictitious pretext of moving from the storage.
For a month they took my bought coins, they either traded or used them in MN and a month later they returned nothing without explaining
Here is a "stock exchange"
September 06, 2017, 12:09:28 AM
Awesome job on the swap. Excited to get my masternode up and running. Folks here we go!
September 05, 2017, 10:26:39 PM
Thanks Fishmaster42, this will help a lot Bro!
September 05, 2017, 10:13:00 PM
100k is the amt you need.
here is a guide for you.
1. Go to Tools -> Debug console and enter the command "masternode genkey".
2. Get account address from main wallet.
In Debug Console enter the command "getaccountaddress MyMasternode".
3. send exactly 100 000 AMS to the address generated in Step 2.
4. Get the proof of transaction in main wallet.
Enter "masternode outputs" and copy the output to the notepad. This is the proof of the transaction.
5. Update masternode.conf in main computer.
Open masternode.conf in the main computer (should be under AppData/AMS folder) and update it as below.
It should look something like this
MN1 IP:50020 PRIVATEKEY 918e5dfa....118093b 0
6. update AMS.conf file as below.
rpcuser=long random username
rpcpassword=longer random password
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1
maxconnections=256
masternode=1
externalip=your unique public ip address:50020
bind=your unique public ip address:50020
masternodeaddr=your unique public ip address:50020
masternodeprivkey= Masternode private key output from Step 1
7. Restart wallet
8. In Masternode tab make sure to activate your MN.
here is a guide for you.
1. Go to Tools -> Debug console and enter the command "masternode genkey".
2. Get account address from main wallet.
In Debug Console enter the command "getaccountaddress MyMasternode".
3. send exactly 100 000 AMS to the address generated in Step 2.
4. Get the proof of transaction in main wallet.
Enter "masternode outputs" and copy the output to the notepad. This is the proof of the transaction.
5. Update masternode.conf in main computer.
Open masternode.conf in the main computer (should be under AppData/AMS folder) and update it as below.
It should look something like this
MN1 IP:50020 PRIVATEKEY 918e5dfa....118093b 0
6. update AMS.conf file as below.
rpcuser=long random username
rpcpassword=longer random password
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1
maxconnections=256
masternode=1
externalip=your unique public ip address:50020
bind=your unique public ip address:50020
masternodeaddr=your unique public ip address:50020
masternodeprivkey= Masternode private key output from Step 1
7. Restart wallet
8. In Masternode tab make sure to activate your MN.
Jump to: