Hi Dev,
Very nice work on the swap function, it worked for me without any problems. I also really like the new wallet. Keep up the good work!
I live in Amsterdam myself and really like this coin to work. I am now collecting enough coins to start my own maternode and support this project and its community.
One question for the dev, the new wallet says "staking is not active" even when my wallet is unlocked, any idea why this is? i have around 35k of coins in my new wallet.
Topic: [ANN][AMS] AmsterdamCoin™ | 100% PoS, Masternodes, Obfuscation, Seesaw - page 128. (Read 272300 times)
August 10, 2017, 03:44:47 AM
August 10, 2017, 03:05:55 AM
Exchange AMS via Swap from Yobit to a new wallet very fast, DEV good work!
The Masternode setting in your wallet is fast. The Masternode is running.
Has the first payment come to someone? How many? :-)
The Masternode setting in your wallet is fast. The Masternode is running.
Has the first payment come to someone? How many? :-)
August 10, 2017, 02:30:07 AM
rpcpassword = CHANGE_PASSWORD in amsterdamcoin.conf
This should be the password that the wallet is password-protected? Or is it an arbitrary password? Where it is then used?
This should be the password that the wallet is password-protected? Or is it an arbitrary password? Where it is then used?
August 10, 2017, 01:54:47 AM
Swap your AmsterdamCoin (AMS)
https://swap.amsterdamcoin.com
1. Enter your new* AmsterdamCoin address
2. Send your old* coins to the given address
3. Receive the exact amount of new AmsterdamCoin after 6 confirmations
We are proud to present our unique automatic swap procedure. Swap your AmsterdamCoin (AMS) now and be the first to setup a new masternode!
(* new wallet is version 4.0.0.0 and the old wallet is version 3.1.0.0)
August 09, 2017, 11:55:30 PM
Masternode activation:
1. Create a new address -> Receive -> New Address
2. Send exactly 100000 AMS to your new address and write down the TX hash
3. Wait for 25 confirmations
4. Open Help -> Debug window -> Tab console
5. Type "masternode outputs" and write down the output
6. Type "masternode genkey" and write down the output
7. Menu Masternodes -> Button Create
8. Alias: Name of the masternode (can be anything)
9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org)
10. PrivKey: The output of the "masternode genkey" command (step 6)
11. TxHash: The left hand side of the output of "masternode outputs" (step 5)
12. Output Index: The right hand side of the output of "masternode outputs" (step 5)
masternode outputs example: { "159eea4303125de0a60fbce8d362778cfe915166d42de1339d9bc79523d9e9a8" : "0" } The left hand side is the TxHash "159eea4303125de0a60fbce8d362778cfe915166d42de1339d9bc79523d9e9a8" and the right hand side is 0 (zero)
Make sure port 61510 is forwarded to your computer (by NAT translation) and that you firewall (like Windows Firewall) accepts connection on this port.
1. Create a new address -> Receive -> New Address
2. Send exactly 100000 AMS to your new address and write down the TX hash
3. Wait for 25 confirmations
4. Open Help -> Debug window -> Tab console
5. Type "masternode outputs" and write down the output
6. Type "masternode genkey" and write down the output
7. Menu Masternodes -> Button Create
8. Alias: Name of the masternode (can be anything)
9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org)
10. PrivKey: The output of the "masternode genkey" command (step 6)
11. TxHash: The left hand side of the output of "masternode outputs" (step 5)
12. Output Index: The right hand side of the output of "masternode outputs" (step 5)
masternode outputs example: { "159eea4303125de0a60fbce8d362778cfe915166d42de1339d9bc79523d9e9a8" : "0" } The left hand side is the TxHash "159eea4303125de0a60fbce8d362778cfe915166d42de1339d9bc79523d9e9a8" and the right hand side is 0 (zero)
Make sure port 61510 is forwarded to your computer (by NAT translation) and that you firewall (like Windows Firewall) accepts connection on this port.
For example:
type: masternode genkey
11:27:58
111111111111111111111111111111111111111111111111111
type: getaccountaddress node
11:28:08
2222222222222222222222222222222222
type: sendtoaddress 2222222222222222222222222222222222 100000
11:28:32
3333333333333333333333333333333333333333333333333333333333333333
type: masternode outputs
11:29:16
{
"3333333333333333333333333333333333333333333333333333333333333333" : "0"
}
amsterdamcoin.conf
Code:
rpcuser=CHANGE_USER
rpcpassword=CHANGE_PASSWORD
rpcallowip=127.0.0.1
# --------------------
listen=1
server=1
daemon=1
#maxconnections=24
# --------------------
masternode=1
masternodeprivkey=111111111111111111111111111111111111111111111111111
externalip=11.22.33.44
masternode.conf
Code:
mn1 11.22.33.44:50020 111111111111111111111111111111111111111111111111111 3333333333333333333333333333333333333333333333333333333333333333 0
August 09, 2017, 11:42:32 PM
Now AMS needs to get listed on Cryptopia 
August 09, 2017, 08:12:36 PM
Man i wanted to have fun with you guys too. Im stuck in cold storage. Hopefully one day i can get my coin and set up. Thanks for all your hard work. Fish
August 09, 2017, 07:03:30 PM
I'm having problems with the swap.
Yobit cancelled my first transaction and afterwards I tried another withdrawal for the swap and now it seems
stuck, read a lot about it, but can't figure out what it is, confirm status: transfer from cold storage.
Any idea?
Yobit cancelled my first transaction and afterwards I tried another withdrawal for the swap and now it seems
stuck, read a lot about it, but can't figure out what it is, confirm status: transfer from cold storage.
Any idea?
Means that Yobit has to do your transaction manually as their hot (online) wallet is empty.
I hope everything goes right, this makes me worry a lot.
August 09, 2017, 06:36:59 PM
Swap your AmsterdamCoin (AMS)
https://swap.amsterdamcoin.com
1. Enter your new* AmsterdamCoin address
2. Send your old* coins to the given address
3. Receive the exact amount of new AmsterdamCoin after 6 confirmations
We are proud to present our unique automatic swap procedure. Swap your AmsterdamCoin (AMS) now and be the first to setup a new masternode!
(* new wallet is version 4.0.0.0 and the old wallet is version 3.1.0.0)
Many thanks for this fantastic swap. absolutly great work.
My MN was the first
now i have 6 MN online and it works great. not easy to set up but all MN on the same PC works now.thanks kees.
August 09, 2017, 06:31:20 PM
Which port is used for MN?
RPC port: 51020
P2P port: 50020
P2P 50020 as shown in the example masternode.conf
August 09, 2017, 06:29:13 PM
Which port is used for MN?
RPC port: 51020
P2P port: 50020
August 09, 2017, 06:26:27 PM
Dev,
I have all my coins on exchanges (yobit nove and coinex).
I have to do something for swap now?
Or swap will be done automatically by exchanges?
I have all my coins on exchanges (yobit nove and coinex).
I have to do something for swap now?
Or swap will be done automatically by exchanges?
The swap will also be done by the exchanges. Or you can use the swap form. You can choose.
August 09, 2017, 06:13:32 PM
Dev,
I have all my coins on exchanges (yobit nove and coinex).
I have to do something for swap now?
Or swap will be done automatically by exchanges?
I have all my coins on exchanges (yobit nove and coinex).
I have to do something for swap now?
Or swap will be done automatically by exchanges?
August 09, 2017, 06:05:00 PM
Swap your AmsterdamCoin (AMS)
https://swap.amsterdamcoin.com
1. Enter your new* AmsterdamCoin address
2. Send your old* coins to the given address
3. Receive the exact amount of new AmsterdamCoin after 6 confirmations
We are proud to present our unique automatic swap procedure. Swap your AmsterdamCoin (AMS) now and be the first to setup a new masternode!
(* new wallet is version 4.0.0.0 and the old wallet is version 3.1.0.0)
Minimum amount is 1 AMS
AMS coin swap with no problems. This was quick and easy and now I have my new AMS master node running with some AMS coins for staking.
August 09, 2017, 06:02:55 PM
I'm having problems with the swap.
Yobit cancelled my first transaction and afterwards I tried another withdrawal for the swap and now it seems
stuck, read a lot about it, but can't figure out what it is, confirm status: transfer from cold storage.
Any idea?
Yobit cancelled my first transaction and afterwards I tried another withdrawal for the swap and now it seems
stuck, read a lot about it, but can't figure out what it is, confirm status: transfer from cold storage.
Any idea?
Means that Yobit has to do your transaction manually as their hot (online) wallet is empty.
August 09, 2017, 06:00:31 PM
I'm having problems with the swap.
Yobit cancelled my first transaction and afterwards I tried another withdrawal for the swap and now it seems
stuck, read a lot about it, but can't figure out what it is, confirm status: transfer from cold storage.
Any idea?
Yobit cancelled my first transaction and afterwards I tried another withdrawal for the swap and now it seems
stuck, read a lot about it, but can't figure out what it is, confirm status: transfer from cold storage.
Any idea?
August 09, 2017, 05:29:07 PM
And we have our first masternode
Do you have a wallet address?
I need to send 100 AMS so that I have exactly 100,000 for the masternode.
Do you have a wallet address?
I need to send 100 AMS so that I have exactly 100,000 for the masternode.
I have 100,100 in my new wallet so want to send someone 100...
Then go to the "Send" tab and enter the address and amount. Click the "Send" button and confirm with "Yes"
I need exactly 100,000 to start a masternode right? but I have 100,100 in my wallet, so I need someone to give me a wallet address so that I can lose 100.
No you need to send 100.000 to your own address. So "to" and "from" the same wallet
Maybe this helps: https://www.youtube.com/watch?v=-GnwdKxBa1Q Its the same for AMS but only the collateral for AMS is 100.000
It worked, Masternode successfully started!
Thanks Keesdewit
August 09, 2017, 05:14:20 PM
And we have our first masternode
Do you have a wallet address?
I need to send 100 AMS so that I have exactly 100,000 for the masternode.
Do you have a wallet address?
I need to send 100 AMS so that I have exactly 100,000 for the masternode.
I have 100,100 in my new wallet so want to send someone 100...
Then go to the "Send" tab and enter the address and amount. Click the "Send" button and confirm with "Yes"
I need exactly 100,000 to start a masternode right? but I have 100,100 in my wallet, so I need someone to give me a wallet address so that I can lose 100.
No you need to send 100.000 to your own address. So "to" and "from" the same wallet
Maybe this helps: https://www.youtube.com/watch?v=-GnwdKxBa1Q Its the same for AMS but only the collateral for AMS is 100.000
August 09, 2017, 05:13:10 PM
And we have our first masternode
Do you have a wallet address?
I need to send 100 AMS so that I have exactly 100,000 for the masternode.
Do you have a wallet address?
I need to send 100 AMS so that I have exactly 100,000 for the masternode.
I have 100,100 in my new wallet so want to send someone 100...
Then go to the "Send" tab and enter the address and amount. Click the "Send" button and confirm with "Yes"
I need exactly 100,000 to start a masternode right? but I have 100,100 in my wallet, so I need someone to give me a wallet address so that I can lose 100.
August 09, 2017, 05:12:55 PM
The swap was really painless and fast! thank you Kees.
Yobit is still on wallet v3 I guess?
Yobit is still on wallet v3 I guess?
Jump to: