[ANN][APT] Aptcoin★ASIC Resistant Scrypt In-Motion(NM) w/Aptcurve Retargeting - page 4.

MickyCOB

full member

Activity: 252

Merit: 100

Quote from: shojayxt on July 24, 2016, 08:25:11 PM

Quote from: MickyCOB on July 24, 2016, 08:03:28 PM

No connections on wallet, Any working nodes would help thanks in advance

addnode=148.251.8.18
addnode=50.244.13.30
addnode=88.206.186.4
addnode=78.220.161.122
addnode=76.105.204.52

Nope nodes didnt work in cofig file still no connections any idea why ?

shojayxt

legendary

Activity: 896

Merit: 1001

Quote from: MickyCOB on July 24, 2016, 08:03:28 PM

No connections on wallet, Any working nodes would help thanks in advance

addnode=148.251.8.18
addnode=50.244.13.30
addnode=88.206.186.4
addnode=78.220.161.122
addnode=76.105.204.52

MickyCOB

full member

Activity: 252

Merit: 100

No connections on wallet, Any working nodes would help thanks in advance

jcpbs

sr. member

Activity: 260

Merit: 250

Guys, my wallet can't sync. No connections available.

Last time it did, was on the 14th of June.

Tried all these nodes:

addnode=45.32.67.42
addnode=108.61.194.182
addnode=50.7.47.93
addnode=199.127.225.232
addnode=199.127.225.195
addnode=199.127.225.191
addnode=199.127.225.164

Help

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

Quote from: shojayxt on July 01, 2016, 10:26:39 PM

Quote from: jojo_le_haricot on June 28, 2016, 02:21:21 AM

I have a question, why block explorer is late compared to network reality ?
For example : block explorer shows that there are 650k APT in this address http://45.32.231.128:3002/address/AQG1rDvz3MHtmaAfVGqUWCeVMmRnMarKa5 but I can tell you that all coins have been moved for a while (more than 10 days and many blocks)

I don't know. Are you sure you're not on a fork? The block explorer http://45.32.231.128:3002/ is on the same block as my wallet and Yobit.

I'm on the right fork and this was my Yobit address. All coins have been transfered but block explorer still show that there are 650k APT but there is none now. Huh

shojayxt

legendary

Activity: 896

Merit: 1001

Quote from: jojo_le_haricot on June 28, 2016, 02:21:21 AM

I have a question, why block explorer is late compared to network reality ?
For example : block explorer shows that there are 650k APT in this address http://45.32.231.128:3002/address/AQG1rDvz3MHtmaAfVGqUWCeVMmRnMarKa5 but I can tell you that all coins have been moved for a while (more than 10 days and many blocks)

I don't know. Are you sure you're not on a fork? The block explorer http://45.32.231.128:3002/ is on the same block as my wallet and Yobit.

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

I have a question, why block explorer is late compared to network reality ?
For example : block explorer shows that there are 650k APT in this address http://45.32.231.128:3002/address/AQG1rDvz3MHtmaAfVGqUWCeVMmRnMarKa5 but I can tell you that all coins have been moved for a while (more than 10 days and many blocks)

shojayxt

legendary

Activity: 896

Merit: 1001

I setup a block explorer at 45.32.231.128:3002 It currently only shows the Yobit market but I'll add the Novaexchange market shortly when I get the time.

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

Quote from: shojayxt on June 24, 2016, 11:51:12 AM

What's wrong with the deposits on yobit?

I made 2 deposits and no one is credited (These are not my first APT deposits on Yobit). I opened a ticket 5 days ago and still no answer.
Moreover when I look at the APT wallet in Yobit the Wallet status is delayed Undecided

Edit : I tried one more deposit this morning, still not working, wallet still delayed (wallet is at block 130919 when network is 131730) Angry

shojayxt

legendary

Activity: 896

Merit: 1001

Quote from: jojo_le_haricot on June 23, 2016, 02:01:04 AM

Really dead this time ? Huh

Explorer not online Undecided

Deposits on Yobit don't work anymore Undecided

What's wrong with the deposits on yobit? They look like they're working to me. Nova Exchange has also listed Aptcoin.

I can setup a block explorer if there is a need.

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

Really dead this time ? Huh

Explorer not online Undecided

Deposits on Yobit don't work anymore Undecided

shojayxt

legendary

Activity: 896

Merit: 1001

I just noticed that Aptcoin is on Novaexchange https://novaexchange.com/market/BTC_APT/

Cryptoraizen

newbie

Activity: 18

Merit: 0

Dev, update please download link for wallet and do you try add this coin on bittrex?

Nice page http://aptcoin.net/

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

I also tried to make a pool following MPOS getting strated and aptcoin readme. The pool seems to be ok but all my shares are invalid Huh

I specified COINDAEMON_ALGO = 'scrypt-nm' in stratum-mining/conf/config.py But what I have to put in MPOS global.inc.php for $config['algorithm'] = '******'; ?

oldcoinguru

full member

Activity: 176

Merit: 100

Quote from: jojo_le_haricot on May 19, 2016, 02:03:31 PM

Pool seems to be working, do you need testers ?
http://45.32.67.42/index.php?page=statistics&action=pool

Solved blocks are still being rejected so don't waste your hash. Still looking into it.

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

Quote from: oldcoinguru on May 19, 2016, 02:16:34 PM

Quote from: aptcoin on May 16, 2016, 09:36:56 PM

Quote from: oldcoinguru on May 15, 2016, 08:10:54 PM

I changed the block explorer to http://45.32.67.42:3001/ because I wanted port 80 for a pool.

I am testing a pool but it won't accept found blocks.

Here is the error from the stratum log:

Code:

2016-05-16 00:32:09,128 INFO template_registry template_registry.submit_share # We found a block candidate! 0000000c1160fd144d21951f38449baf097a114105d7045b498592be8f30df90
2016-05-16 00:32:09,142 ERROR protocol protocol.process_failure # [Failure instance: Traceback: : 'BlockTemplate' object has no attribute 'calc_sha256'
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:192:dataReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:238:lineReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:13:_handle_event
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:81:call
---  ---
/usr/lib/python2.7/dist-packages/twisted/internet/defer.py:139:maybeDeferred
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:78:_run
/home/d/stratum-mining/mining/service.py:172:submit
/home/d/stratum-mining/lib/template_registry.py:329:submit_share
/home/d/stratum-mining/lib/halfnode.py:358:is_valid
]

Any ideas?

This has not been tested for some time. Have you certainly installed the aptcoin_scrypt and stratum_mining from the aptcoin github sources after or instead of installing the normal ones? Also, the configuration appears to not be correct. Perhaps yours is trying to use sha256 instead of scrypt-nm?

I followed this:

Quote from: aptcoin on October 28, 2014, 12:00:19 PM

Attention all Pool Operators:

We have added stratum support for aptcoin to the stratum-mining module. All of the code is in github, and the easiest way to get it is as follows:

https://github.com/aptcoin/stratum-mining.git

Follow normal pool setup instructions (for example the MPos quickstart guide), but using our stratum-mining module instead. The steps differ only a little bit:

cd stratum-mining
git submodule init
git submodule update

cd externals/aptcoin_scrypt
sudo python setup.py install

cd ../stratum
sudo python setup.py install

Then add your config file to stratum-mining/conf/config.py (be sure to specify 'scrypt-nm' instead of 'scrypt' though) and start the pool.

This does not affect the pool front end that you're using.

This does not require a new Aptcoin release, however it won't hurt to update your CPUminer if you're going to mine against a pool. Our version is here:

https://github.com/aptcoin/cpuminer.git

Questions, comments, problems? Let us know!

Ok and it works ? can we sign up to your pool ?

oldcoinguru

full member

Activity: 176

Merit: 100

Quote from: aptcoin on May 16, 2016, 09:36:56 PM

Quote from: oldcoinguru on May 15, 2016, 08:10:54 PM

I changed the block explorer to http://45.32.67.42:3001/ because I wanted port 80 for a pool.

I am testing a pool but it won't accept found blocks.

Here is the error from the stratum log:

Code:

2016-05-16 00:32:09,128 INFO template_registry template_registry.submit_share # We found a block candidate! 0000000c1160fd144d21951f38449baf097a114105d7045b498592be8f30df90
2016-05-16 00:32:09,142 ERROR protocol protocol.process_failure # [Failure instance: Traceback: : 'BlockTemplate' object has no attribute 'calc_sha256'
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:192:dataReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:238:lineReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:13:_handle_event
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:81:call
---  ---
/usr/lib/python2.7/dist-packages/twisted/internet/defer.py:139:maybeDeferred
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:78:_run
/home/d/stratum-mining/mining/service.py:172:submit
/home/d/stratum-mining/lib/template_registry.py:329:submit_share
/home/d/stratum-mining/lib/halfnode.py:358:is_valid
]

Any ideas?

This has not been tested for some time. Have you certainly installed the aptcoin_scrypt and stratum_mining from the aptcoin github sources after or instead of installing the normal ones? Also, the configuration appears to not be correct. Perhaps yours is trying to use sha256 instead of scrypt-nm?

I followed this:

Quote from: aptcoin on October 28, 2014, 12:00:19 PM

Attention all Pool Operators:

We have added stratum support for aptcoin to the stratum-mining module. All of the code is in github, and the easiest way to get it is as follows:

https://github.com/aptcoin/stratum-mining.git

Follow normal pool setup instructions (for example the MPos quickstart guide), but using our stratum-mining module instead. The steps differ only a little bit:

cd stratum-mining
git submodule init
git submodule update

cd externals/aptcoin_scrypt
sudo python setup.py install

cd ../stratum
sudo python setup.py install

Then add your config file to stratum-mining/conf/config.py (be sure to specify 'scrypt-nm' instead of 'scrypt' though) and start the pool.

This does not affect the pool front end that you're using.

This does not require a new Aptcoin release, however it won't hurt to update your CPUminer if you're going to mine against a pool. Our version is here:

https://github.com/aptcoin/cpuminer.git

Questions, comments, problems? Let us know!

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

Pool seems to be working, do you need testers ?
http://45.32.67.42/index.php?page=statistics&action=pool

jojo_le_haricot

jr. member

Activity: 55

Merit: 1

So finally, did you managed to run the pool ?

aptcoin

newbie

Activity: 53

Merit: 0

Quote from: oldcoinguru on May 15, 2016, 08:10:54 PM

I changed the block explorer to http://45.32.67.42:3001/ because I wanted port 80 for a pool.

I am testing a pool but it won't accept found blocks.

Here is the error from the stratum log:

Code:

2016-05-16 00:32:09,128 INFO template_registry template_registry.submit_share # We found a block candidate! 0000000c1160fd144d21951f38449baf097a114105d7045b498592be8f30df90
2016-05-16 00:32:09,142 ERROR protocol protocol.process_failure # [Failure instance: Traceback: : 'BlockTemplate' object has no attribute 'calc_sha256'
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:192:dataReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:238:lineReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:13:_handle_event
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:81:call
---  ---
/usr/lib/python2.7/dist-packages/twisted/internet/defer.py:139:maybeDeferred
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:78:_run
/home/d/stratum-mining/mining/service.py:172:submit
/home/d/stratum-mining/lib/template_registry.py:329:submit_share
/home/d/stratum-mining/lib/halfnode.py:358:is_valid
]

Any ideas?

This has not been tested for some time. Have you certainly installed the aptcoin_scrypt and stratum_mining from the aptcoin github sources after or instead of installing the normal ones? Also, the configuration appears to not be correct. Perhaps yours is trying to use sha256 instead of scrypt-nm?

Topic: [ANN][APT] Aptcoin★ASIC Resistant Scrypt In-Motion(NM) w/Aptcurve Retargeting - page 4. (Read 56758 times)