Pages:
Author

Topic: [ANN][APT] Aptcoin★ASIC Resistant Scrypt In-Motion(NM) w/Aptcurve Retargeting - page 4. (Read 56760 times)

full member
Activity: 252
Merit: 100
No connections on wallet, Any working nodes would help thanks in advance

addnode=148.251.8.18
addnode=50.244.13.30
addnode=88.206.186.4
addnode=78.220.161.122
addnode=76.105.204.52

Nope nodes didnt work in cofig file still no connections any idea why ?
legendary
Activity: 896
Merit: 1001
No connections on wallet, Any working nodes would help thanks in advance

addnode=148.251.8.18
addnode=50.244.13.30
addnode=88.206.186.4
addnode=78.220.161.122
addnode=76.105.204.52
full member
Activity: 252
Merit: 100
No connections on wallet, Any working nodes would help thanks in advance
sr. member
Activity: 260
Merit: 250
Guys, my wallet can't sync. No connections available.

Last time it did, was on the 14th of June.

Tried all these nodes:

addnode=45.32.67.42
addnode=108.61.194.182
addnode=50.7.47.93
addnode=199.127.225.232
addnode=199.127.225.195
addnode=199.127.225.191
addnode=199.127.225.164

Help Smiley
jr. member
Activity: 55
Merit: 1
I have a question, why block explorer is late compared to network reality ?
For example : block explorer shows that there are 650k APT in this address http://45.32.231.128:3002/address/AQG1rDvz3MHtmaAfVGqUWCeVMmRnMarKa5 but I can tell you that all coins have been moved for a while (more than 10 days and many blocks)

I don't know.  Are you sure you're not on a fork?  The block explorer http://45.32.231.128:3002/ is on the same block as my wallet and Yobit.

I'm on the right fork and this was my Yobit address. All coins have been transfered but block explorer still show that there are 650k APT but there is none now.  Huh
legendary
Activity: 896
Merit: 1001
I have a question, why block explorer is late compared to network reality ?
For example : block explorer shows that there are 650k APT in this address http://45.32.231.128:3002/address/AQG1rDvz3MHtmaAfVGqUWCeVMmRnMarKa5 but I can tell you that all coins have been moved for a while (more than 10 days and many blocks)

I don't know.  Are you sure you're not on a fork?  The block explorer http://45.32.231.128:3002/ is on the same block as my wallet and Yobit.
jr. member
Activity: 55
Merit: 1
I have a question, why block explorer is late compared to network reality ?
For example : block explorer shows that there are 650k APT in this address http://45.32.231.128:3002/address/AQG1rDvz3MHtmaAfVGqUWCeVMmRnMarKa5 but I can tell you that all coins have been moved for a while (more than 10 days and many blocks)
legendary
Activity: 896
Merit: 1001
I setup a block explorer at 45.32.231.128:3002 It currently only shows the Yobit market but I'll add the Novaexchange market shortly when I get the time. 
jr. member
Activity: 55
Merit: 1
What's wrong with the deposits on yobit?  

I made 2 deposits and no one is credited (These are not my first APT deposits on Yobit). I opened a ticket 5 days ago and still no answer.
Moreover when I look at the APT wallet in Yobit the Wallet status is delayed  Undecided

Edit : I tried one more deposit this morning, still not working, wallet still delayed (wallet is at block 130919 when network is 131730)  Angry
legendary
Activity: 896
Merit: 1001
Really dead this time ?  Huh

Explorer not online  Undecided
Deposits on Yobit don't work anymore  Undecided

What's wrong with the deposits on yobit?  They look like they're working to me.  Nova Exchange has also listed Aptcoin.

I can setup a block explorer if there is a need.
jr. member
Activity: 55
Merit: 1
Really dead this time ?  Huh

Explorer not online  Undecided
Deposits on Yobit don't work anymore  Undecided
legendary
Activity: 896
Merit: 1001
newbie
Activity: 18
Merit: 0
Dev, update please download link for wallet and do you try add this coin on bittrex? Smiley
Nice page http://aptcoin.net/ Smiley
jr. member
Activity: 55
Merit: 1
I also tried to make a pool following MPOS getting strated and aptcoin readme. The pool seems to be ok but all my shares are invalid  Huh

I specified COINDAEMON_ALGO = 'scrypt-nm' in stratum-mining/conf/config.py But what I have to put in MPOS global.inc.php for $config['algorithm'] = '******';  ?
full member
Activity: 176
Merit: 100
Pool seems to be working, do you need testers ?
http://45.32.67.42/index.php?page=statistics&action=pool


Solved blocks are still being rejected so don't waste your hash.  Still looking into it.
jr. member
Activity: 55
Merit: 1
I changed the block explorer to http://45.32.67.42:3001/ because I wanted port 80 for a pool.

I am testing a pool but it won't accept found blocks.

Here is the error from the stratum log:

Code:
2016-05-16 00:32:09,128 INFO template_registry template_registry.submit_share # We found a block candidate! 0000000c1160fd144d21951f38449baf097a114105d7045b498592be8f30df90
2016-05-16 00:32:09,142 ERROR protocol protocol.process_failure # [Failure instance: Traceback: : 'BlockTemplate' object has no attribute 'calc_sha256'
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:192:dataReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:238:lineReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:13:_handle_event
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:81:call
--- ---
/usr/lib/python2.7/dist-packages/twisted/internet/defer.py:139:maybeDeferred
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:78:_run
/home/d/stratum-mining/mining/service.py:172:submit
/home/d/stratum-mining/lib/template_registry.py:329:submit_share
/home/d/stratum-mining/lib/halfnode.py:358:is_valid
]

Any ideas?

This has not been tested for some time.  Have you certainly installed the aptcoin_scrypt and stratum_mining from the aptcoin github sources after or instead of installing the normal ones?  Also, the configuration appears to not be correct.  Perhaps yours is trying to use sha256 instead of scrypt-nm?

I followed this:

Attention all Pool Operators:

We have added stratum support for aptcoin to the stratum-mining module.  All of the code is in github, and the easiest way to get it is as follows:

https://github.com/aptcoin/stratum-mining.git

Follow normal pool setup instructions (for example the MPos quickstart guide), but using our stratum-mining module instead.  The steps differ only a little bit:

cd stratum-mining
git submodule init
git submodule update

cd externals/aptcoin_scrypt
sudo python setup.py install

cd ../stratum
sudo python setup.py install

Then add your config file to stratum-mining/conf/config.py (be sure to specify 'scrypt-nm' instead of 'scrypt' though) and start the pool.

This does not affect the pool front end that you're using.

This does not require a new Aptcoin release, however it won't hurt to update your CPUminer if you're going to mine against a pool.  Our version is here:

https://github.com/aptcoin/cpuminer.git

Questions, comments, problems?  Let us know!


Ok and it works ? can we sign up to your pool ?
full member
Activity: 176
Merit: 100
I changed the block explorer to http://45.32.67.42:3001/ because I wanted port 80 for a pool.

I am testing a pool but it won't accept found blocks.

Here is the error from the stratum log:

Code:
2016-05-16 00:32:09,128 INFO template_registry template_registry.submit_share # We found a block candidate! 0000000c1160fd144d21951f38449baf097a114105d7045b498592be8f30df90
2016-05-16 00:32:09,142 ERROR protocol protocol.process_failure # [Failure instance: Traceback: : 'BlockTemplate' object has no attribute 'calc_sha256'
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:192:dataReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:238:lineReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:13:_handle_event
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:81:call
--- ---
/usr/lib/python2.7/dist-packages/twisted/internet/defer.py:139:maybeDeferred
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:78:_run
/home/d/stratum-mining/mining/service.py:172:submit
/home/d/stratum-mining/lib/template_registry.py:329:submit_share
/home/d/stratum-mining/lib/halfnode.py:358:is_valid
]

Any ideas?

This has not been tested for some time.  Have you certainly installed the aptcoin_scrypt and stratum_mining from the aptcoin github sources after or instead of installing the normal ones?  Also, the configuration appears to not be correct.  Perhaps yours is trying to use sha256 instead of scrypt-nm?

I followed this:

Attention all Pool Operators:

We have added stratum support for aptcoin to the stratum-mining module.  All of the code is in github, and the easiest way to get it is as follows:

https://github.com/aptcoin/stratum-mining.git

Follow normal pool setup instructions (for example the MPos quickstart guide), but using our stratum-mining module instead.  The steps differ only a little bit:

cd stratum-mining
git submodule init
git submodule update

cd externals/aptcoin_scrypt
sudo python setup.py install

cd ../stratum
sudo python setup.py install

Then add your config file to stratum-mining/conf/config.py (be sure to specify 'scrypt-nm' instead of 'scrypt' though) and start the pool.

This does not affect the pool front end that you're using.

This does not require a new Aptcoin release, however it won't hurt to update your CPUminer if you're going to mine against a pool.  Our version is here:

https://github.com/aptcoin/cpuminer.git

Questions, comments, problems?  Let us know!

jr. member
Activity: 55
Merit: 1
jr. member
Activity: 55
Merit: 1
So finally, did you managed to run the pool ?
newbie
Activity: 53
Merit: 0
I changed the block explorer to http://45.32.67.42:3001/ because I wanted port 80 for a pool.

I am testing a pool but it won't accept found blocks.

Here is the error from the stratum log:

Code:
2016-05-16 00:32:09,128 INFO template_registry template_registry.submit_share # We found a block candidate! 0000000c1160fd144d21951f38449baf097a114105d7045b498592be8f30df90
2016-05-16 00:32:09,142 ERROR protocol protocol.process_failure # [Failure instance: Traceback: : 'BlockTemplate' object has no attribute 'calc_sha256'
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:192:dataReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/protocol.py:238:lineReceived
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:13:_handle_event
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:81:call
--- ---
/usr/lib/python2.7/dist-packages/twisted/internet/defer.py:139:maybeDeferred
/usr/local/lib/python2.7/dist-packages/stratum-0.3.14-py2.7.egg/stratum/services.py:78:_run
/home/d/stratum-mining/mining/service.py:172:submit
/home/d/stratum-mining/lib/template_registry.py:329:submit_share
/home/d/stratum-mining/lib/halfnode.py:358:is_valid
]

Any ideas?

This has not been tested for some time.  Have you certainly installed the aptcoin_scrypt and stratum_mining from the aptcoin github sources after or instead of installing the normal ones?  Also, the configuration appears to not be correct.  Perhaps yours is trying to use sha256 instead of scrypt-nm?
Pages:
Jump to: