buying coin is way easier than mining it
+1
I buy them , mine them and multipool them
Im preparing my christmas
What was last year Christmas like ?
Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 964. (Read 2171091 times)
September 07, 2014, 06:26:23 AM
+1
I buy them , mine them and multipool them
Im preparing my christmas
What was last year Christmas like ?
September 07, 2014, 06:26:11 AM
hey guys ,
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
update please
So if the plotting stop for any reason and u know the last number lets say 145678 and u have 200 GB (80000) plotting size the next number will be 145678 + 800000 + 1
Second question ... if u make small plots or large ones is the same thing .... (if u make small ones u need to be more present at pc to watch them
)EDIT : sorry for my english i know is not the best
This has happened to me numerous times. If I can record where the nonce is at then I just change the start point of my generation. I then figure out how many nonces are left and enter that into the generate bat. I run it again, It will not overwrite the first.
If it crashes and I have to do it. I look at how much space is left on the drive and do the same calculations as above.
thanks
so i am using ( is this correct )
C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 6286766055087500646 0 4800000 1000 3
pause
last one was
writing from nonce 286000
Generating 287000
what do i have to put in the bat file now ?
September 07, 2014, 06:25:47 AM
buying coin is way easier than mining it
i see what you did there, lmao
September 07, 2014, 06:23:33 AM
buying coin is way easier than mining it
+1
I buy them , mine them and multipool them
Im preparing my christmas
September 07, 2014, 06:23:27 AM
buying coin is way easier than mining it
I am doing both but I have spent all of my btc and I do not want to part with any of my other cryptos. Tried to take out a 10 BTC loan on btcjam but no one likes me. I may try again at lower BTC but I will be damned if I pay 22% interest.
September 07, 2014, 06:21:12 AM
buying coin is way easier than mining it
September 07, 2014, 06:13:57 AM
hey guys ,
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
update please
So if the plotting stop for any reason and u know the last number lets say 145678 and u have 200 GB (80000) plotting size the next number will be 145678 + 800000 + 1
Second question ... if u make small plots or large ones is the same thing .... (if u make small ones u need to be more present at pc to watch them
)EDIT : sorry for my english i know is not the best
This has happened to me numerous times. If I can record where the nonce is at then I just change the start point of my generation. I then figure out how many nonces are left and enter that into the generate bat. I run it again, It will not overwrite the first.
If it crashes and I have to do it. I look at how much space is left on the drive and do the same calculations as above.
September 07, 2014, 06:09:25 AM
Thank you sir ,, that was painless enuff ,, now to figure out the mining bit
September 07, 2014, 06:05:20 AM
hey guys ,
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
update please
So if the plotting stop for any reason and u know the last number lets say 145678 and u have 200 GB (80000) plotting size the next number will be 145678 + 800000 + 1
Second question ... if u make small plots or large ones is the same thing .... (if u make small ones u need to be more present at pc to watch them
)EDIT : sorry for my english i know is not the best
September 07, 2014, 06:03:42 AM
did all the things the guide said i had to ,,changed the java bit ,changed the 4000 to 1000 did the pass phrase,ive got an adress.txt but the thing is empty
OK
Then try running the file called run.bat int the burst_1.0.3 folder. Give it a minute to load up. Then go to http://localhost:8125/ and enter your password. Then on the left hand side you should see an id number. That is your address. Copy and paste into the file address.txt.
September 07, 2014, 06:00:50 AM
hey guys ,
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
update please
September 07, 2014, 05:59:26 AM
did all the things the guide said i had to ,,changed the java bit ,changed the 4000 to 1000 did the pass phrase,ive got an adress.txt but the thing is empty
September 07, 2014, 05:55:20 AM
Well this has been 4 hours wasted and i aint even got an address yet.This is bull
Install the software on the harddrive that you want to generate plots with. Run the file called run_dump_address.bat
September 07, 2014, 05:53:25 AM
Well this has been 4 hours wasted and i aint even got an address yet.This is bull
September 07, 2014, 05:47:34 AM
Is there a way I can generate plots on a cloud server? How and where?
Yeah, you can, but storage ain't cheap..How and where please? I would like to look at it from top to bottom and do a cost benefit analysis.
there is something for cpu, i need to plot faster, i mean soemthing like betarig, but for cpu, i don't want to deal with all the bullshit of address/card holder and those shit
would this work? http://www.cpusage.com/
get startet doesn't work....
Well that sucks. Here I found some others:
Would Amazon EC2 work?
How about www.rackspacecloud.com? or GoGrid? or MS Azure?
September 07, 2014, 05:47:22 AM
Which stagger size I should use with 32gb ram on 3tb hdd?
If you are on Windows 8191 is the max size. If you are on linux go with 100000 (100000 x 256) to be safe
IMO , stagger size only matters if using a single huge HDD because of the time needed to scan through the drive. If for example , a person is using 500 gb HDD stagger size of 8000 VS 1000 wouldn't make a huge difference scanning drive whereas a single 20 TB (Not sure if it exist as a single drive) HDD will have a huge impact for 8000 vs 1000 because of the time needed to scan 20 TB of data. I would assume that a single 3 TB HDD and below wouldn't need a very big stagger to be effective in scanning through the data
September 07, 2014, 05:46:37 AM
it is great that now have 209.16 MH on scrypt multipool , but i was wonder there the multipool dump and buy burst? polo or c-cex
I think that these multipools will drive the price up because the pool owners need to convert their mined coinage to BURST. At least in the short term. Already starting to see an uptick in prices and first batch of payouts has not occurred yet.
September 07, 2014, 05:44:56 AM
Is there a way I can generate plots on a cloud server? How and where?
Yeah, you can, but storage ain't cheap..How and where please? I would like to look at it from top to bottom and do a cost benefit analysis.
there is something for cpu, i need to plot faster, i mean soemthing like betarig, but for cpu, i don't want to deal with all the bullshit of address/card holder and those shit
would this work? http://www.cpusage.com/
get startet doesn't work....
September 07, 2014, 05:43:32 AM
hey guys ,
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
CAN the OP be updated with how to?
thread is 350 pages
so if my computer restarts or i turn it off and i know the last number , how do I create a 2nd plot and with out over writing the plot i have already created
is it also better to make multiple small plots on a HDD or just one
can we please get a set by step with screen shots as this is still pretty high end nerdgasmic.
September 07, 2014, 05:41:10 AM
I think that is time to promote more the coin ...
1. mIRC Freenode #burstcoin
2. Twitter https://twitter.com/Burstcoin
3. Reddit http://www.reddit.com/r/burstcoin
4. Facebook https://www.facebook.com/pages/BurstCoin/381160565364801?fref=ts
1. mIRC Freenode #burstcoin
2. Twitter https://twitter.com/Burstcoin
3. Reddit http://www.reddit.com/r/burstcoin
4. Facebook https://www.facebook.com/pages/BurstCoin/381160565364801?fref=ts
Jump to: