[ANN][CRW] CROWN (SHA256) | Platform | Governance | Systemnodes | Masternodes | - page 233.

defunctec

legendary

Activity: 1092

Merit: 1000

Quote from: stonehedge on June 13, 2016, 04:18:27 PM

Quote from: defunctec on June 13, 2016, 03:51:17 PM

Quote from: stonehedge on June 13, 2016, 03:46:48 PM

Right, that's five Thrones running. I'm going to park it there for a while.

Sounds like you did that with ease!?

You said you clone your Thrones, does this make it simple to create several?

BTW, the new Thrones wallet will include a GUI for setting up Thrones

I launched one VPS, compiled the daemon, synced the blockchain and created a crowncoin.conf. I then created a snapshot of that VPS.

I launched four other VPS instances using that snapshot. All I had to do was delete wallet.dat so that I could import the private key of a 10,000CRW vin without the vin from the previous Throne and edit the IP address and throne key in the conf file. Once that was done, all I had to do was start each Throne.

Takes about five minutes each.

Looking forward to your guide! Are you going to include all the goodies, like swap files and snapshot commands? Wink

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Quote from: defunctec on June 13, 2016, 03:51:17 PM

Quote from: stonehedge on June 13, 2016, 03:46:48 PM

Right, that's five Thrones running. I'm going to park it there for a while.

Sounds like you did that with ease!?

You said you clone your Thrones, does this make it simple to create several?

BTW, the new Thrones wallet will include a GUI for setting up Thrones

I launched one VPS, compiled the daemon, synced the blockchain and created a crowncoin.conf. I then created a snapshot of that VPS.

I launched four other VPS instances using that snapshot. All I had to do was delete wallet.dat so that I could import the private key of a 10,000CRW vin without the vin from the previous Throne and edit the IP address and throne key in the conf file. Once that was done, all I had to do was start each Throne.

Takes about five minutes each.

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Quote from: IconFirm on June 13, 2016, 04:01:51 PM

Quote from: defunctec on June 13, 2016, 03:51:17 PM

BTW, the new Thrones wallet will include a GUI for setting up Thrones

How does one set up a daemon as a throne wallet?

Edit: Sorry, wasn't reading previous posts......

The short answer is just like a Dash masternode.

The long answer will be in the guide I post in the next day or two.

IconFirm

hero member

Activity: 1438

Merit: 574

Always ask questions. #StandWithHongKong

Quote from: defunctec on June 13, 2016, 03:51:17 PM

BTW, the new Thrones wallet will include a GUI for setting up Thrones

How does one set up a daemon as a throne wallet?

Edit: Sorry, wasn't reading previous posts......

Edit2: I added

Code:

throne=1

to the conf file, but am now getting

Code:

You must specify a throneprivkey in the configuration.

Is the throneprivkey anything I want or does it have to be specific? Also, how should it be written in the conf file - throneprivkey=?

Thanks.

defunctec

legendary

Activity: 1092

Merit: 1000

Quote from: stonehedge on June 13, 2016, 03:46:48 PM

Right, that's five Thrones running. I'm going to park it there for a while.

Sounds like you did that with ease!?

You said you clone your Thrones, does this make it simple to create several?

BTW, the new Thrones wallet will include a GUI for setting up Thrones

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Right, that's five Thrones running. I'm going to park it there for a while.

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

I forgot a step.

1) New build to be put on BCT and web site.
2) Guide on how to set up a throne needs to be completed and posted.
3) Roadmap for services that thrones will provide in the future needs to be defined and published.
4) Miners need to update to latest version.
5) Enforce payments
6) ?
7) Profit
Cool

Bro Down

defunctec

legendary

Activity: 1092

Merit: 1000

Does anyone know where the majority of crowncoins hash comes from? we'll need to contact them very soon

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Quote from: defunctec on June 13, 2016, 01:05:19 PM

Quote from: stonehedge on June 13, 2016, 10:32:47 AM

Code:

ubuntu@server-2:~/src/crowncoin/src$ ./crowncoin-cli thronelist
{
    "149.202.164.150:9340" : "ENABLED"
}

First Throne is online.

Congratulations stone! I knew you could do it! Cheesy

Take alook at my newest version of potential income from Thrones. This is as close to accurate figures as we're going to get

https://docs.google.com/spreadsheets/d/1x4KjbxtqGPKghajJb3scJBL6ED3B_CCBbYES6N6CR28/edit#gid=1746240759

You've convinced me Cheesy

Four more Thrones live. Will launch a fifth when I have enough confirmations.

So, steps to get the ball rolling:

1) New build to be put on BCT and web site.
2) Guide on how to set up a throne needs to be completed and posted.
3) Roadmap for services that thrones will provide in the future needs to be defined and published.
4) Miners need to update to latest version.
5) Enforce payments
6) ?
7) Profit

defunctec

legendary

Activity: 1092

Merit: 1000

Quote from: stonehedge on June 13, 2016, 10:32:47 AM

Code:

ubuntu@server-2:~/src/crowncoin/src$ ./crowncoin-cli thronelist
{
    "149.202.164.150:9340" : "ENABLED"
}

First Throne is online.

Congratulations stone! I knew you could do it! Cheesy

Take alook at my newest version of potential income from Thrones. This is as close to accurate figures as we're going to get

https://docs.google.com/spreadsheets/d/1x4KjbxtqGPKghajJb3scJBL6ED3B_CCBbYES6N6CR28/edit#gid=1746240759

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Code:

ubuntu@server-2:~/src/crowncoin/src$ ./crowncoin-cli thronelist
{
"149.202.164.150:9340" : "ENABLED"
}

First Throne is online.

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Not long now

Code:

ubuntu@server-2:~/src/crowncoin/src$ ./crowncoin-cli throne start
throne input must have at least 15 confirmations

crowncoin_knight

hero member

Activity: 808

Merit: 500

Great news stone!

Quote from: stonehedge on June 13, 2016, 08:20:56 AM

Finally managed to compile successfully. Thanks for your help all.

Will sync chain and then see if I can set up some test Thrones.

I'm hoping to post a decent guide on how to compile and set up a Throne soon so other noobs like me can contribute to testing.

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Finally managed to compile successfully. Thanks for your help all.

Will sync chain and then see if I can set up some test Thrones.

I'm hoping to post a decent guide on how to compile and set up a Throne soon so other noobs like me can contribute to testing.

defunctec

legendary

Activity: 1092

Merit: 1000

Quote from: dihydrogenmonoxide on June 13, 2016, 06:45:52 AM

Quote from: defunctec on June 12, 2016, 04:28:08 PM

Quote from: IconFirm on June 12, 2016, 02:00:33 PM

Quote from: defunctec on June 12, 2016, 01:31:11 PM

Can anyone help us with the above problem?

I use Xubuntu 14.04 LTS 64bit & this is what I use for compiling my daemons - works for me every time.

From within the downloaded directory (crowncoin):

Code:

chmod +x autogen.sh
chmod +x share/genbuild.sh
chmod +x src/leveldb/build_detect_platform
./autogen.sh
./configure --disable-tests --without-gui
make clean
make

Then:

Code:

cd src
strip crowncoind
chmod +x crowncoind

No need to install, I just run it from whatever dierectory it's in.

16.04 is a relatively new release, so if it still fails it's probably due to missing packages that haven't been released for the newer version yet. There are some bugs with every new release, which is why I wait a few months before updating to the latest version.

So from root you just use those commands and the wallet will build?
I'll give it a go! Thanks

Edit: Tried your command and i seem to be getting much more compiled then with the previous commands used, but still doesn't work

Code:

rpcrawtransaction.cpp:299:77: required from here
/usr/include/boost/variant/get.hpp:178:5: error: invalid application of ‘sizeof’ to incomplete type ‘boost::STATIC_ASSERTION_FAILURE’
BOOST_STATIC_ASSERT_MSG(

https://github.com/Crowndev/crowncoin/pull/2

Thank you for the code! As soon as dev get's home (evening) we will merge this into the code.

dihydrogenmonoxide

full member

Activity: 197

Merit: 101

Quote from: defunctec on June 12, 2016, 04:28:08 PM

Quote from: IconFirm on June 12, 2016, 02:00:33 PM

Quote from: defunctec on June 12, 2016, 01:31:11 PM

Can anyone help us with the above problem?

I use Xubuntu 14.04 LTS 64bit & this is what I use for compiling my daemons - works for me every time.

From within the downloaded directory (crowncoin):

Code:

chmod +x autogen.sh
chmod +x share/genbuild.sh
chmod +x src/leveldb/build_detect_platform
./autogen.sh
./configure --disable-tests --without-gui
make clean
make

Then:

Code:

cd src
strip crowncoind
chmod +x crowncoind

No need to install, I just run it from whatever dierectory it's in.

16.04 is a relatively new release, so if it still fails it's probably due to missing packages that haven't been released for the newer version yet. There are some bugs with every new release, which is why I wait a few months before updating to the latest version.

So from root you just use those commands and the wallet will build?
I'll give it a go! Thanks

Edit: Tried your command and i seem to be getting much more compiled then with the previous commands used, but still doesn't work

Code:

rpcrawtransaction.cpp:299:77: required from here
/usr/include/boost/variant/get.hpp:178:5: error: invalid application of ‘sizeof’ to incomplete type ‘boost::STATIC_ASSERTION_FAILURE’
BOOST_STATIC_ASSERT_MSG(

https://github.com/Crowndev/crowncoin/pull/2

IconFirm

hero member

Activity: 1438

Merit: 574

Always ask questions. #StandWithHongKong

Not from root, from your normal user account. The sudo command is needed to install packages, but compiling is done from within your normal user account. However, judging from your logs, it looks like there is a problem with the boost packages for 16.04 - this is what I use to install all required packages for all my wallets:

Code:

sudo apt-get update && sudo apt-get upgrade
sudo apt-get -y install software-properties-common
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev

Then:

Code:

sudo apt-get --no-install-recommends install python-software-properties git python-rrdtool python-pygame python-scipy python-twisted python-twisted-web python-imaging build-essential libglib2.0-dev libglibmm-2.4-dev python-dev libssl-dev libboost-all-dev dh-autoreconf libcurl4-openssl-dev libtool autotools-dev autoconf automake pkg-config libprotoc8 libgtk2.0-dev libgmp-dev libmpfr-dev yasm libevent-dev python-gmpy curl bsdmainutils

Some of these packages are not required for CRW, but installing them won't harm & will ensure that all dependences are met for any other wallet daemons you compile in the future. If after installing the above you are still getting errors I'd say it's a 16.04 issue that needs further investigation.

defunctec

legendary

Activity: 1092

Merit: 1000

Quote from: IconFirm on June 12, 2016, 02:00:33 PM

Quote from: defunctec on June 12, 2016, 01:31:11 PM

Can anyone help us with the above problem?

I use Xubuntu 14.04 LTS 64bit & this is what I use for compiling my daemons - works for me every time.

From within the downloaded directory (crowncoin):

Code:

chmod +x autogen.sh
chmod +x share/genbuild.sh
chmod +x src/leveldb/build_detect_platform
./autogen.sh
./configure --disable-tests --without-gui
make clean
make

Then:

Code:

cd src
strip crowncoind
chmod +x crowncoind

No need to install, I just run it from whatever dierectory it's in.

16.04 is a relatively new release, so if it still fails it's probably due to missing packages that haven't been released for the newer version yet. There are some bugs with every new release, which is why I wait a few months before updating to the latest version.

So from root you just use those commands and the wallet will build?
I'll give it a go! Thanks

Edit: Tried your command and i seem to be getting much more compiled then with the previous commands used, but still doesn't work

Code:

rpcrawtransaction.cpp:299:77: required from here
/usr/include/boost/variant/get.hpp:178:5: error: invalid application of ‘sizeof’ to incomplete type ‘boost::STATIC_ASSERTION_FAILURE’
BOOST_STATIC_ASSERT_MSG(

IconFirm

hero member

Activity: 1438

Merit: 574

Always ask questions. #StandWithHongKong

Quote from: defunctec on June 12, 2016, 01:31:11 PM

Can anyone help us with the above problem?

I use Xubuntu 14.04 LTS 64bit & this is what I use for compiling my daemons - works for me every time.

From within the downloaded directory (crowncoin):

Code:

chmod +x autogen.sh
chmod +x share/genbuild.sh
chmod +x src/leveldb/build_detect_platform
./autogen.sh
./configure --disable-tests --without-gui
make clean
make

Then:

Code:

cd src
strip crowncoind
chmod +x crowncoind

No need to install, I just run it from whatever dierectory it's in.

16.04 is a relatively new release, so if it still fails it's probably due to missing packages that haven't been released for the newer version yet. There are some bugs with every new release, which is why I wait a few months before updating to the latest version.

defunctec

legendary

Activity: 1092

Merit: 1000

Can anyone help us with the above problem?

Topic: [ANN][CRW] CROWN (SHA256) | Platform | Governance | Systemnodes | Masternodes | - page 233. (Read 317079 times)