Author

Topic: [ANN][DGC] Digitalcoin | Multi-algo & Masternodes | Established 2013 - page 242. (Read 523584 times)

full member
Activity: 196
Merit: 100
How come digitalcoin is not in Cryptsy yet?

big miners are still on wdc until it's not profitable

re: http://dgc.scryptmining.com  keep in mind, as the site says, the coins/day calc is not accurate atm. The fact it says X but you get Y is not the sign of short-changing.  However, a couple people have pm'd me with some questions and details, and I will take a look.  Not running a scam here, if there are issues with payouts I'll make it right.   I can only fix what I know about, and only now have some details work work on.

Thanks for the hashrate support, I'll work to get any protential problems sorted out, and keep people updated here.

thanks
sr. member
Activity: 448
Merit: 250
re: http://dgc.scryptmining.com  keep in mind, as the site says, the coins/day calc is not accurate atm. The fact it says X but you get Y is not the sign of short-changing.  However, a couple people have pm'd me with some questions and details, and I will take a look.  Not running a scam here, if there are issues with payouts I'll make it right.   I can only fix what I know about, and only now have some details to work on.

Thanks for the hashrate support, I'll work to get any protential problems sorted out, and keep people updated here.
legendary
Activity: 1148
Merit: 1001
How come digitalcoin is not in Cryptsy yet?
full member
Activity: 196
Merit: 100
On 2 pools I get 1/2 of coins I should. Both http://dgc.scryptmining.com/index and http://digi.cryptcoins.net/index . With LTC/WDC I dont have that kind of problem, so my hardware is ok. Mining on arround 6500khs for many hours I get 600 coins per day, and both pools says 1200 coins per day. So I shall stick to WDC/LTC, since all other scrypt based coins work fine for me. Pool admins, you can look under username "linkaleksinac" and see if this is true. 430 coins I have in my wallet and was mining for 17 hours now.

They appreciated your 50 percent donation.  (I also noticed this discrepancy and went elsewhere).

Pool admin I'd suggest this gets a little attention ASAP or all the goodwill will evaporate as fast at it appeared. I do sense this is just a miss configuration and in good faith I'm keeping my 2 miners pointed at the pool.

I am missing a good 300-400 coins of payout from scryptmining too Sad

I hopw he will fix this as he did yesterday..
sr. member
Activity: 339
Merit: 250
The server next.afraid.org:8119 is still there and fully reliable. You are free to join the pool.
full member
Activity: 210
Merit: 110
God rest Donnie's soul.
On 2 pools I get 1/2 of coins I should. Both http://dgc.scryptmining.com/index and http://digi.cryptcoins.net/index . With LTC/WDC I dont have that kind of problem, so my hardware is ok. Mining on arround 6500khs for many hours I get 600 coins per day, and both pools says 1200 coins per day. So I shall stick to WDC/LTC, since all other scrypt based coins work fine for me. Pool admins, you can look under username "linkaleksinac" and see if this is true. 430 coins I have in my wallet and was mining for 17 hours now.

They appreciated your 50 percent donation.  (I also noticed this discrepancy and went elsewhere).

Pool admin I'd suggest this gets a little attention ASAP or all the goodwill will evaporate as fast at it appeared. I do sense this is just a miss configuration and in good faith I'm keeping my 2 miners pointed at the pool.

I am missing a good 300-400 coins of payout from scryptmining too Sad
sr. member
Activity: 392
Merit: 250
Had to do a quick restart of my server crypto-coins.de:8907

But now its finally connected to other P2Pool Nodes i think
sr. member
Activity: 392
Merit: 250
Trying out crypto-coins.de but getting a lot of rejects and also this "stratum from pool 0 requested work restart" which make my accepted shares a lot lower than at normal pools (36/10 atm). Should i use some different settings?

I think the "stratum from pool 0 requested work restart" message is normal for p2pool. Got lots of those messages on my own worker, but the payouts are not affected and are at a nomral heigth for me.

But you should not get so many rejected share

You could try "--queue 0 -s 1" on cgminer

or adjust share difficulty by putting +0.00116414 behind your username, or the value matching your hashing power. Se tthis List:

Hash Rate (KH/s)         Difficulty
                 1                  +0.00000116
                 5                  +0.00000582
                10                 +0.00001164
                50                 +0.00005821
                100               +0.00011641
                250               +0.00029103
                500               +0.00058207
                750               +0.00087310
                1000              +0.00116414
                1600              +0.001862624
sr. member
Activity: 336
Merit: 250
My p2pool has been up continuously and averaging about 100 mh/s.  Always happy to take new miners we're running at less than half CPU utilization so plenty of room to grow.

http://54.227.253.120:9500/static/


What P2P_PORT (from /p2pool/networks.py) are you using?

5477

thanks
hero member
Activity: 1395
Merit: 505
My p2pool has been up continuously and averaging about 100 mh/s.  Always happy to take new miners we're running at less than half CPU utilization so plenty of room to grow.

http://54.227.253.120:9500/static/


What P2P_PORT (from /p2pool/networks.py) are you using?

5477
hero member
Activity: 1395
Merit: 505
My p2pool has been up continuously and averaging about 100 mh/s.  Always happy to take new miners we're running at less than half CPU utilization so plenty of room to grow.

http://54.227.253.120:9500/static/

I've just directed a miner your way - cheers!

Going from your instructions +0.00116414 is fine for one of my rigs 2 x 7970, though how do I calculate for my other - is there a formula?

Here is a general guideline for where to set that difficulty:

Hash Rate (KH/s)         Difficulty
                 1                  +0.00000116
                 5                  +0.00000582
                10                 +0.00001164
                50                 +0.00005821
                100               +0.00011641
                250               +0.00029103
                500               +0.00058207
                750               +0.00087310
                1000              +0.00116414
                1600              +0.001862624
sr. member
Activity: 392
Merit: 250
Added some pools to my list, mail or PM me those i missed thanks.

http://pools.mishak.net/#/?=digitalcoin
great list.

PM'd you because of my other Pools
member
Activity: 112
Merit: 10

cryptcoins seemed legit for me but i checked my trasaction and looks look like i'm getting 30 every 3-4h with my 1900kh, estimate is about 400 and even with most optimistic calculations of 30 every 3h i get only 240. Pplns should not matter i think if i'm mining there for more that 24h straight and took 3 automatic payouts of 30(too small sample?) from the middle to figure this out, dunno...

seems slow for me too but meh. it works. lol
sr. member
Activity: 336
Merit: 250
My p2pool has been up continuously and averaging about 100 mh/s.  Always happy to take new miners we're running at less than half CPU utilization so plenty of room to grow.

http://54.227.253.120:9500/static/


What P2P_PORT (from /p2pool/networks.py) are you using?
newbie
Activity: 51
Merit: 0
Trying out crypto-coins.de but getting a lot of rejects and also this "stratum from pool 0 requested work restart" which make my accepted shares a lot lower than at normal pools (36/10 atm). Should i use some different settings?
newbie
Activity: 23
Merit: 0
Added some pools to my list, mail or PM me those i missed thanks.

http://pools.mishak.net/#/?=digitalcoin
newbie
Activity: 51
Merit: 0

cryptcoins seemed legit for me but i checked my trasaction and looks look like i'm getting 30 every 3-4h with my 1900kh, estimate is about 400 and even with most optimistic calculations of 30 every 3h i get only 240. Pplns should not matter i think if i'm mining there for more that 24h straight and took 3 automatic payouts of 30(too small sample?) from the middle to figure this out, dunno...
newbie
Activity: 17
Merit: 0


Hi, it's probably a good idea to put at least one other pool in the .conf file in the same format as you're using already, with a comma between the brackets so it looks like this:
},
{

This will mean you can use the stratum or longpoll from the other pool to detect new blocks faster, so you can start solo mining them at the same time other pools see them.


Wil try to add several stratum and longpool in the .conf.
Good formula.

Thanks.

+1.

full member
Activity: 120
Merit: 100
My p2pool has been up continuously and averaging about 100 mh/s.  Always happy to take new miners we're running at less than half CPU utilization so plenty of room to grow.

http://54.227.253.120:9500/static/

I've just directed a miner your way - cheers!

Going from your instructions +0.00116414 is fine for one of my rigs 2 x 7970, though how do I calculate for my other - is there a formula?
sr. member
Activity: 392
Merit: 250
My p2pool has been up continuously and averaging about 100 mh/s.  Always happy to take new miners we're running at less than half CPU utilization so plenty of room to grow.

http://54.227.253.120:9500/static/

Same here: http://crypto-coins.de:8907 is continously between 30 and 40 MHashs. Dedicated Server is running 24/7 and can take at lot more work....
Jump to: