Topic: [ANN][ETHASH][PoW] Aura - Smart Contract Ledger & YouStock - Tokenized Selfhood - page 20. (Read 31254 times)
January 25, 2018, 02:24:42 PM
January 25, 2018, 02:14:16 PM
Whats the proper syntax for claymore miner? I'm getting an invalid login when I execute:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool aura.hpool.net:8008 -ewal wallet -eworker rig1 -epsw x -allcoins 1
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool aura.hpool.net:8008 -ewal wallet -eworker rig1 -epsw x -allcoins 1
Ours looks like this
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethDcrMiner64.exe -epool aura.dpool.io:8008 -ewal
January 25, 2018, 02:13:20 PM
Whats the proper syntax for claymore miner? I'm getting an invalid login when I execute:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool aura.hpool.net:8008 -ewal wallet -eworker rig1 -epsw x -allcoins 1
nm figured it out, was missing "0x" in front of my generated wallet.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool aura.hpool.net:8008 -ewal wallet -eworker rig1 -epsw x -allcoins 1
nm figured it out, was missing "0x" in front of my generated wallet.
January 25, 2018, 01:54:08 PM
January 25, 2018, 01:49:01 PM
January 25, 2018, 01:39:48 PM
How do I create a wallet? 
You have to download aura.exe and launch the console in the directiory. Press shift+right mouse click and choose to launch cmd. Then write down next command: aura account new January 25, 2018, 01:37:28 PM
First round of payouts going out now. Looks good.
Yep! Now I have fresh auras! 
25mh is aproxx 3 aura not bad! January 25, 2018, 01:37:22 PM
How do I create a wallet?
January 25, 2018, 01:30:13 PM
And how relevant is the subject now with the ledger? There is already a sea of different accounting programs and to compete with them, there must be something in your book that is superior to the current one.
January 25, 2018, 01:22:18 PM
First round of payouts going out now. Looks good.
January 25, 2018, 01:18:17 PM
We are now up to 6gh and the pool and network looks like it's stabilizing well.
January 25, 2018, 12:20:22 PM
Everyone should be spreading hash out equally to help secure the network and prevent forks.
January 25, 2018, 12:15:50 PM
Pool Hash Rate: 10.06 GH
Network Hash Rate: 6.91 GH
January 25, 2018, 12:02:43 PM
January 25, 2018, 11:42:01 AM
http://aura.dpool.io
We have added Aura to our list of coins.
stratum+tcp://aura.dpool.io:8008
Cheers please add to ann OP
NICEHASH also supported on same port
We have added Aura to our list of coins.
stratum+tcp://aura.dpool.io:8008
Cheers please add to ann OP
NICEHASH also supported on same port
January 25, 2018, 11:20:39 AM
50mh/s for sometime and no new block found yet 
really need a pool
really need a pool January 25, 2018, 11:13:51 AM
Guys am I successfully mining?
looks like it. post screenshot of miner as well
Anyway here is another screenshot
i dont know what miner are you using. but i wanted to see the miner. I am using claymore ethdcrminer.
but first you have to do
aura account new
aura account list
then copy the account address and replace it in miner with 0x0000000000000000000
then start aura.exe with this command.
aura --rpc --rpccorsdomain localhost 2
then you
use this command to run claymore for solo mining.
EthDcrMiner64.exe -epool http://127.0.0.1:8545 -ewal 0x00000000000000000000000000000000000 -mode 1 -eworker rig1
I use Claymore and I got
Probably you are trying to mine Ethereum fork. Please specify "-allcoins 1" or "-allpools 1" option. Check "Readme" file for details.
Pool sent wrong data, cannot set epoch, disconnect
ETH: Connection lost, retry in 20 sec...
try this
EthDcrMiner64.exe -epool http://127.0.0.1:8545 -ewal 0x000000000000000000000000000000000000 -epsw x -allpools 1 -allcoins exp -gser 2 -mode 1 -eworker rig1
make sure you have run the command prompt with "aura --rpc --rpccorsdomain localhost 2" running.
January 25, 2018, 10:38:11 AM
Guys am I successfully mining?
looks like it. post screenshot of miner as well
Anyway here is another screenshot
https://preview.ibb.co/ddGi4G/untitled.png
i dont know what miner are you using. but i wanted to see the miner. I am using claymore ethdcrminer.
but first you have to do
aura account new
aura account list
then copy the account address and replace it in miner with 0x0000000000000000000
then start aura.exe with this command.
aura --rpc --rpccorsdomain localhost 2
then you
use this command to run claymore for solo mining.
EthDcrMiner64.exe -epool http://127.0.0.1:8545 -ewal 0x00000000000000000000000000000000000 -mode 1 -eworker rig1
I use Claymore and I got
Probably you are trying to mine Ethereum fork. Please specify "-allcoins 1" or "-allpools 1" option. Check "Readme" file for details.
Pool sent wrong data, cannot set epoch, disconnect
ETH: Connection lost, retry in 20 sec...
January 25, 2018, 10:26:04 AM
Guys am I successfully mining?
looks like it. post screenshot of miner as well
Anyway here is another screenshot
i dont know what miner are you using. but i wanted to see the miner. I am using claymore ethdcrminer.
but first you have to do
aura account new
aura account list
then copy the account address and replace it in miner with 0x0000000000000000000
then start aura.exe with this command.
aura --rpc --rpccorsdomain localhost 2
then you
use this command to run claymore for solo mining.
EthDcrMiner64.exe -epool http://127.0.0.1:8545 -ewal 0x00000000000000000000000000000000000 -mode 1 -eworker rig1
I think he is CPU mining in the console.
January 25, 2018, 10:24:08 AM
smartcrypto thank you!
simply for Clay
EthDcrMiner64 -epool http://127.0.0.1:8545 -mode 1 -allpools 1
This working
simply for Clay
EthDcrMiner64 -epool http://127.0.0.1:8545 -mode 1 -allpools 1
This working
Jump to: