[ANN][FC] Fuguecoin - Fugue256 hash, Launched! NO PRE-M! CPU/GPU minable! - page 39.

hashnine

full member

Activity: 126

Merit: 100

Quote from: drmavis on March 18, 2014, 10:51:23 AM

If SGMiner is working correctly, you will be receiving output similar to below (I also wanted to announce that I am excited to get my first-ever block doing solo-mining!):

[08:48:52] Network diff set to 39
[08:48:52] New block detected on network
[08:49:04] Network diff set to 39
[08:49:04] New block detected on network
[08:49:08] Found block for Pool 0!
[08:49:09] Accepted 024dd145 Diff 111/39 BLOCK! GPU 0

I dont have "Found block for Pool 0!" & "Accepted....."

Thats normal i think, no?

HD6950 -> 17 MH/S
HD6990 -> 20 MH/S

Intensity 18

enerbyte

hero member

Activity: 556

Merit: 501

Quote from: BTCspoon on March 18, 2014, 10:52:13 AM

Quote from: chiznitz on March 18, 2014, 10:47:19 AM

Well considering if you have 100 free votes which means less than 34 people voting once a day you will be included in the Chance selection, I don't really see anywhere on our page that it says you HAVE to pay. You vote, you get to 100 votes, you're included with 100 chances. So sure you can get listed for free, so your comment is incorrect.

Thanks all!

If you are here, it's probably because you see the potential the coin have! and the amount of money you can make from the fees alone. So, cut off the crap, and list it, or don't. Your loss if you don't anyway.

+1

count_cyrpto

sr. member

Activity: 288

Merit: 250

Quote from: anonuser777 on March 18, 2014, 10:33:39 AM

Try http:// instead of stratum

Quote from: crike on March 18, 2014, 10:34:42 AM

sgminer -k fuguecoin -o 127.0.0.1:portnumber -u asd -p asd -I 25 -g 4 -w 64

Quote from: jacknb1ack on March 18, 2014, 10:36:18 AM

Isn't port and rpcport should be different ? and try -o 127.0.0.1:9089 without http and/or stratum+tcp always work for me ...

btw, i can't get > 50MH on my r9 280x ... any help ?

127.0.0.1:port, no http or stratum coupled with adding -k fuguecoin seemed to work...

Thanks fellas. Much appreciated...

BTCspoon

full member

Activity: 238

Merit: 100

Quote from: chiznitz on March 18, 2014, 10:47:19 AM

Well considering if you have 100 free votes which means less than 34 people voting once a day you will be included in the Chance selection, I don't really see anywhere on our page that it says you HAVE to pay. You vote, you get to 100 votes, you're included with 100 chances. So sure you can get listed for free, so your comment is incorrect.

Thanks all!

If you are here, it's probably because you see the potential the coin have! and the amount of money you can make from the fees alone. So, cut off the crap, and list it, or don't. Your loss if you don't anyway.

drmavis

member

Activity: 69

Merit: 10

If SGMiner is working correctly, you will be receiving output similar to below (I also wanted to announce that I am excited to get my first-ever block doing solo-mining!):

[08:48:52] Network diff set to 39
[08:48:52] New block detected on network
[08:49:04] Network diff set to 39
[08:49:04] New block detected on network
[08:49:08] Found block for Pool 0!
[08:49:09] Accepted 024dd145 Diff 111/39 BLOCK! GPU 0

chiznitz

hero member

Activity: 574

Merit: 500

Quote from: crike on March 18, 2014, 10:29:23 AM

Quote from: matu on March 18, 2014, 10:28:09 AM

Hello!

I'm here to let you know about our exchange www.cryptoaltex.com, we have a voting program that you might be interested in participating if you would like to get listed, please check out https://www.cryptoaltex.com/index.php?page=newcoin for the details

you mean we should pay for you to list fuguecoin? no thanks

Well considering if you have 100 free votes which means less than 34 people voting once a day you will be included in the Chance selection, I don't really see anywhere on our page that it says you HAVE to pay. You vote, you get to 100 votes, you're included with 100 chances. So sure you can get listed for free, so your comment is incorrect.

Thanks all!

hashnine

full member

Activity: 126

Merit: 100

Hey i now mine using GPU but how can i be sure if that really work or not ? sgminer said it's ok, but i want to be 100% sure, can i see it from the wallet qt debug?

Kiss

zakorus

hero member

Activity: 736

Merit: 500

epic! this coin is going to be huge! Grin

segafanatik

member

Activity: 95

Merit: 10

woké michel

Oups, what's wrong with sgminer ?

[16:31:48] Started sgminer 4.1.0
[16:31:51] Error -11: Building Program (clBuildProgram)
[16:31:51] "./kernel/fugue.cl", line 33: error: storage-class spec
extern/static/register not allowed for variables
__constant static const sph_u32 IV224[] = {
^

"./kernel/fugue.cl", line 39: error: storage-class specifiers

[16:31:51] Failed to init GPU thread 1, disabling device 1
[16:31:51] Restarting the GPU from the menu will not fix this.
[16:31:51] Try restarting sgminer.
Press enter to continue:
[16:31:52] Waiting for work to be available from pools.

jacknb1ack

newbie

Activity: 48

Merit: 0

Quote from: count_cyrpto on March 18, 2014, 10:31:00 AM

Quote from: daemmon on March 18, 2014, 10:24:37 AM

Quote from: count_cyrpto on March 18, 2014, 10:23:00 AM

Trying to solo mine, edited my config right (or so I think), using 127.0.0.1 as an ip, changed the user password and added it to the bat file. Even synced it with my wallet, but nada.

Any ideas guys?

I had to add the rpcallowip=IP line to the conf file. Test with localhost, 127.0.0.1 or (in my case since I'm behind a router) 192.168.0.100.

Tried all three, and nothing. I'm thinking I might have the wrong port in my conf file? This is my conf.

listen=1
server=1
daemon=1
rpcuser=u
rpcpassword=p
rpcallowip=127.0.0.1
port=9089
rpcport=9089
addnode=192.200.115.101

my bat file is

timeout /t 10
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -o stratum+tcp://127.0.0.1:9089 -u u -p p

I've tried localhost and 192.168.0.100 in lieu of 127.0.0.1....

Isn't port and rpcport should be different ? and try -o 127.0.0.1:9089 without http and/or stratum+tcp always work for me ...

btw, i can't get > 50MH on my r9 280x ... any help ?

BTCspoon

full member

Activity: 238

Merit: 100

Quote from: crike on March 18, 2014, 10:29:23 AM

Quote from: matu on March 18, 2014, 10:28:09 AM

Hello!

Snip

you mean we should pay for you to list fuguecoin? no thanks

Yes unfortunately vote is becoming more valuable than the coins themselves. The new credo to rip you off of your BTC. Don't pay attention to that kind of guys, just push the 'Ignore' button under their names.

crike

full member

Activity: 168

Merit: 100

sgminer -k fuguecoin -o 127.0.0.1:portnumber -u asd -p asd -I 25 -g 4 -w 64

anonuser777

full member

Activity: 140

Merit: 100

Quote from: count_cyrpto on March 18, 2014, 10:31:00 AM

Tried all three, and nothing. I'm thinking I might have the wrong port in my conf file? This is my conf.

listen=1
server=1
daemon=1
rpcuser=u
rpcpassword=p
rpcallowip=127.0.0.1
port=9089
rpcport=9089
addnode=192.200.115.101

my bat file is

timeout /t 10
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -o stratum+tcp://127.0.0.1:9089 -u u -p p

I've tried localhost and 192.168.0.100 in lieu of 127.0.0.1....

Try http:// instead of stratum

supermachion

newbie

Activity: 14

Merit: 0

I like it.

count_cyrpto

sr. member

Activity: 288

Merit: 250

Quote from: daemmon on March 18, 2014, 10:24:37 AM

Quote from: count_cyrpto on March 18, 2014, 10:23:00 AM

Trying to solo mine, edited my config right (or so I think), using 127.0.0.1 as an ip, changed the user password and added it to the bat file. Even synced it with my wallet, but nada.

Any ideas guys?

I had to add the rpcallowip=IP line to the conf file. Test with localhost, 127.0.0.1 or (in my case since I'm behind a router) 192.168.0.100.

Tried all three, and nothing. I'm thinking I might have the wrong port in my conf file? This is my conf.

listen=1
server=1
daemon=1
rpcuser=u
rpcpassword=p
rpcallowip=127.0.0.1
port=9089
rpcport=9089
addnode=192.200.115.101

my bat file is

timeout /t 10
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -o stratum+tcp://127.0.0.1:9089 -u u -p p

I've tried localhost and 192.168.0.100 in lieu of 127.0.0.1....

sceneboss

newbie

Activity: 4

Merit: 0

where is mac wallet.dat located? its not in normal place ~/Library/application support/coin

crike

full member

Activity: 168

Merit: 100

Quote from: matu on March 18, 2014, 10:28:09 AM

Hello!

I'm here to let you know about our exchange www.cryptoaltex.com, we have a voting program that you might be interested in participating if you would like to get listed, please check out https://www.cryptoaltex.com/index.php?page=newcoin for the details

you mean we should pay for you to list fuguecoin? no thanks

matu

full member

Activity: 168

Merit: 100

Hello!

I'm here to let you know about our exchange www.cryptoaltex.com, we have a voting program that you might be interested in participating if you would like to get listed, please check out https://www.cryptoaltex.com/index.php?page=newcoin for the details

PhattyBanks

hero member

Activity: 644

Merit: 500

GPU 0 failure

daemmon

member

Activity: 70

Merit: 10

Quote from: count_cyrpto on March 18, 2014, 10:23:00 AM

Trying to solo mine, edited my config right (or so I think), using 127.0.0.1 as an ip, changed the user password and added it to the bat file. Even synced it with my wallet, but nada.

Any ideas guys?

I had to add the rpcallowip=IP line to the conf file. Test with localhost, 127.0.0.1 or (in my case since I'm behind a router) 192.168.0.100.

Topic: [ANN][FC] Fuguecoin - Fugue256 hash, Launched! NO PRE-M! CPU/GPU minable! - page 39. (Read 122155 times)