Topic: [ANN][FLAP] FlappyCoin ★ OLD/DEAD THREAD GO TO NEW ONE ★ - page 196. (Read 345331 times)

Stablehash Features:

• 48GB DDR3 ram + Xenon 4/8 core processor
• 2TB HDD + RAM memcache
• 160 Gbps DDoS mitigation
• 99+% efficiency
• 99+% uptime
• PROP 0% fee on launch!
• VARDIFF
• Commitment to uptime and stability
• IRC chat

A problem with the front end not displaying new blocks was fixed!

http://flappy.stablehash.com/

addnode=162.243.63.239

or
in console :
addnode 162.243.63.239 add

List of supported websites added to main page:
http://flappycoin.info/supported-sites

dont hope too much for the recognition of the coin. you may be the one losing at the end. I have a huge btc amount but only invested 0.1BTC in FLAP.

The issue is settled, and the other dev will pursue no action against this Flappycoin.  I have actually begun talking with the dev on possible project ideas together.  
  
In the meantime, the recognition of this coin alone will carry it to 30 satoshi.  If you are selling at 4 and 5 satoshi trying to scalp a profit, be careful; demand is increasing and you may find that plebs aren't willing to dump coins back on your at lower bid levels.  With the confusion of Pandacoin v2 vs. v3, people are looking for a new 'it' coin and this is going to be the one of the moment.  
  
If you want to sell and try to flip, fine, but go for higher levels than 1 satoshi higher.  At least go for double digit satoshis, but even then be careful.  I am buying and holding and recommend you do the same.  In at 2 - 4 satoshi and I'm holding until at least 50 -100, maybe more.

What's your problem man?

FT4w8E5xgyiVCLJmZ67ePvBA689XbfcsvM

Thanks I found it funny and for the guy who asked about the other...yes there is a controversy about who's flappy is flappin real! LMAO

A guy on reddit made us this video:
http://www.reddit.com/r/flappycoin/comments/1y38v2/flappycoin_1st_support_video/

Almost to block 6000! KGW here we come 

Buy/Sell anything with FlappyCoin here:
/r/FlappyCoinMarketPlace

No problem, thank you very much for your help.

Sorry for the delay had to wait an eternity to post

Working now thanks to new nodes. If anyone needs it, my addnodes:


First 8 lines were added thanks to alchebyte's getpeerinfo.

Thank you all for your help, this really is a nice community. I have tried:

- Using the .conf fearisfearless pasted (it's the same .conf I used before changing ports and username/password) - no luck
- Copying the .conf to qt folder as suggested by fearisfearless (I though this might work) - but still no luck
- Adding the rpcconnect line as minerman1234 suggested (and also removing port line later, though I don't think that's necessary) - nothing

Thank you very much for your suggestions, though.

As I mentioned, I could debug this issue myself if anyone would paste getpeerinfo from their windows wallet (addresses:ports, you can censor everything else if you want to).
Thank you alchebyte!

getpeerinfo


[
{
"addr" : "173.58.8.110:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601476,
"bytessent" : 527098,
"bytesrecv" : 11744651,
"blocksrequested" : 0,
"conntime" : 1392593284,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5315,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "213.114.129.89:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601475,
"bytessent" : 675301,
"bytesrecv" : 3455514,
"blocksrequested" : 0,
"conntime" : 1392593290,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5315,
"banscore" : 0
},
{
"addr" : "99.241.74.216:11556",
"services" : "00000003",
"lastsend" : 1392601477,
"lastrecv" : 1392601476,
"bytessent" : 353498,
"bytesrecv" : 1963709,
"blocksrequested" : 0,
"conntime" : 1392593291,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5315,
"banscore" : 0
},
{
"addr" : "98.196.133.57:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601475,
"bytessent" : 267624,
"bytesrecv" : 2100373,
"blocksrequested" : 0,
"conntime" : 1392593297,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5316,
"banscore" : 0
},
{
"addr" : "137.226.148.87:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601473,
"bytessent" : 329021,
"bytesrecv" : 1963115,
"blocksrequested" : 0,
"conntime" : 1392593313,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5316,
"banscore" : 0
},
{
"addr" : "78.90.137.167:11556",
"services" : "00000003",
"lastsend" : 1392601477,
"lastrecv" : 1392601475,
"bytessent" : 286214,
"bytesrecv" : 1548176,
"blocksrequested" : 0,
"conntime" : 1392593348,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5317,
"banscore" : 0
},
{
"addr" : "173.51.180.254:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601475,
"bytessent" : 243209,
"bytesrecv" : 1518156,
"blocksrequested" : 0,
"conntime" : 1392593352,
"version" : 70002,
"subver" : "/Satoshi:1.0.0.1/",
"inbound" : false,
"startingheight" : 5317,
"banscore" : 0
},
{
"addr" : "5.175.193.221:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601476,
"bytessent" : 114248,
"bytesrecv" : 199770,
"blocksrequested" : 0,
"conntime" : 1392596218,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5370,
"banscore" : 0
}
]

To begin, the "port" field shouldn't be necessary.  Secondly, it looks like you're missing the rpcconnect field, try adding:

rpcconnect=127.0.0.1

If you're mining from a rig that's separate from the one on your wallet, you'll also need to add rpcallowip as a field as well.

Replace config file with this

rpcuser=flappy
rpcpassword=mario
daemon=1
server=1
listen=1
rpcport=11555

addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651

Nothing wrong with 20 satoshi... that's 5x where it is now, and it means every million is worth 0.2BTC You can still mine that even with 1 2-3 card rig in a day :5-P

If I invest 0.5BTC in renting rigs then I can expect to make around 4-4.5BTC if it goes to 20 Satoshi :]

look at my post close to the bottom.  https://bitcointalk.org/index.php?topic=464743.640  See if this helps.  I put my conf file with my flappycoin-qt.exe and others put in AppData\Roaming\Flappycoin.  I can fire up my webex and help you, if you'd like

Well, it's the same one that was suggested to me, I only changed the ports in case it conflicted with some other wallet...


I would just like to get some "getpeerinfo" to compare the nodes.

Thanks for all the help, though. This is the first time I encounter such problem with a wallet, and I've had about 20-30-ish wallets on this machine.