what miner are you using? Lower expiration time and queue length.
using CGminer, i'll give that a shot and report back... BTW
Your Valid: 2573
Invalid: 188
Topic: [ANN][FTC][STRATUM] [0% Fee] feathercoin.is-a-geek.com Pool - page 18. (Read 33917 times)
using CGminer, i'll give that a shot and report back... BTW
Your Valid: 2573
Invalid: 188
what miner are you using? Lower expiration time and queue length.
been running straight for 2 days... no real change in hash rate
Paid Shares
Your Valid: 2447
Invalid: 165
dono after an hour here are my stats
Your Valid: 2479
Invalid: 176
so that is 25% lost this hour
what would be causing this?
Yesterday some changes were made to help reduce rejects and stales. If most of your invalids are from before that time, it shouldn't be a problem anymore, if they are steadily growing, there is something going on.
As far as individual hashrates, they might not be 100% accurate, but they are close enough for the amount of CPU I am saving on the calculations. The pools hashrate is much more correct.
As far as individual hashrates, they might not be 100% accurate, but they are close enough for the amount of CPU I am saving on the calculations. The pools hashrate is much more correct.
k sounds good i'm just making sure that my hash is getting to you correctly... i don't really care it it shows ocorrect lol... i'll moniter the invalids for 24h and report back
Hash is just a feel good statistic. What really matters are the shares.
Yesterday some changes were made to help reduce rejects and stales. If most of your invalids are from before that time, it shouldn't be a problem anymore, if they are steadily growing, there is something going on.
As far as individual hashrates, they might not be 100% accurate, but they are close enough for the amount of CPU I am saving on the calculations. The pools hashrate is much more correct.
As far as individual hashrates, they might not be 100% accurate, but they are close enough for the amount of CPU I am saving on the calculations. The pools hashrate is much more correct.
k sounds good i'm just making sure that my hash is getting to you correctly... i don't really care it it shows ocorrect lol... i'll moniter the invalids for 24h and report back
Yesterday some changes were made to help reduce rejects and stales. If most of your invalids are from before that time, it shouldn't be a problem anymore, if they are steadily growing, there is something going on.
As far as individual hashrates, they might not be 100% accurate, but they are close enough for the amount of CPU I am saving on the calculations. The pools hashrate is much more correct.
As far as individual hashrates, they might not be 100% accurate, but they are close enough for the amount of CPU I am saving on the calculations. The pools hashrate is much more correct.
are those invalids recent, or older?
only been part of the pool for 2 days so none older than that =)
are those invalids recent, or older?
You might need to give it a few minutes to get the hash rate up.
As far as invalids go, I am seeing very low to none.
As far as invalids go, I am seeing very low to none.
been running straight for 2 days... no real change in hash rate
Paid Shares
Your Valid: 2447
Invalid: 165
You might need to give it a few minutes to get the hash rate up.
As far as invalids go, I am seeing very low to none.
As far as invalids go, I am seeing very low to none.
few questions
1. why is it that my displayed hash rate is about 1/3 of what is displayed by my miner, i know that the site is an estimate but normally on other sites it is within about 20kh/s. but i'm displaying 42kh/s yet my miner is showing 140-160kh/s
2. what is a normal invalid share % i'm sitting at about 15% of all shares are invalid
thanks
1. why is it that my displayed hash rate is about 1/3 of what is displayed by my miner, i know that the site is an estimate but normally on other sites it is within about 20kh/s. but i'm displaying 42kh/s yet my miner is showing 140-160kh/s
2. what is a normal invalid share % i'm sitting at about 15% of all shares are invalid
thanks
BlockStats graph is now working with correct difficulty, shares, etc.
All unpaid blocks have been paid. Check transaction log to see.
That was the new difficulty kicking back in with new hash algorithms.
Pool is now up to 63 difficulty.
Will process payments on unpaid shares within a few hours.
Pool is now up to 63 difficulty.
Will process payments on unpaid shares within a few hours.
seems like the hashrate of everyone has doubled
edit : back to normal
edit : back to normal
A few recent blocks over the night didnt payout. I am looking into it. So many transactions happening that I needed to look further than 500 every 2 minutes to catch everything.
*edit*
and you cannot calculate the amount you will get from a block directly from shares/total shares*200. PPLNS comes into play to adjust that number.
As for stales: Seems we have doubled in size in the past 12 hours. Time to up the pool difficulty again I see.
*edit*
and you cannot calculate the amount you will get from a block directly from shares/total shares*200. PPLNS comes into play to adjust that number.
As for stales: Seems we have doubled in size in the past 12 hours. Time to up the pool difficulty again I see.
Stales are 7-10% now with my miners... It's not an issue on my end as I get 1-2% stales with give-me-ltc
Last confirm got me 0.37412694
i had 429 shares in that round
round total share was 37,920
0.000872091 per share x 37,920 = 33.069 FC
are my calculations wrong ?
i had 429 shares in that round
round total share was 37,920
0.000872091 per share x 37,920 = 33.069 FC
are my calculations wrong ?
I think i'm getting only half the coins on this pool... 
Can you guys check if i calculate it correctly?
Pool sais i have 53.333 valid paid shares.
I have received about 215.5 feathercoin for these shares.
If i then look at the difficulty graph in block stats i see that the mean shares per block is about 25.000.
So according to this info i should have received more than 400 feathercoin on current difficulty. So it should have been more since most of these shares were mined a few days ago. It is as if the blocks are only counted for 100FC instead of 200FC.
So, whats going on?
Can you guys check if i calculate it correctly?
Pool sais i have 53.333 valid paid shares.
I have received about 215.5 feathercoin for these shares.
If i then look at the difficulty graph in block stats i see that the mean shares per block is about 25.000.
So according to this info i should have received more than 400 feathercoin on current difficulty. So it should have been more since most of these shares were mined a few days ago. It is as if the blocks are only counted for 100FC instead of 200FC.
So, whats going on?
working correctly on my side are earning estimate correct ?
I believe they are correct as they can be.
thanks alot added 1650 kh/s your way
Jump to: