Topic: [ANN][JPC]MAKE JACKPOTCOIN GREAT AGAIN! - page 28. (Read 470275 times)

Read the changelog.. if there was a fork between versions you have to use the newer version.. see what i mean ?

And the feedback about CPU wallet usage is interesting guys (assuming you are all staking ? if your posting your usage percentage)

I have a six core AMD 1100t. It usually uses about 6-13% on each core at any given time.

Thanks for the reply.

Main problem is the wallet becoming unresponsive everything I click on something. For instance if I want to check the transaction tab it goes into "Not Resposive" up in the top left corner and takes minutes, sometimes up to 10 minutes to get going. It does this every time I click on a tab.

I am not cpu mining anything else and I know the wallet uses some of the cpu to stake. I don't have this issue with any other wallets that I run and have staking.

I knew the DEV said something about 1.6 would solve some issues but that seems like ages ago.

the latest wallet uses 1 core for 100% almost all the time, so it depends how many cores you have.
for 8 core CPU it is like 13%.
do not know what the wallet is counting all the time.

If I'm not mistaken, the dev(s) is(are) Korean. The community is definitely less active here.  Might be more so on other languages forums.

For some speculation, I notice the rich lists are still very fat at the top so one could assume there is a future in it. Usually there is an "abandon ship" mentality when a coin is dying. Me personally, I'm holding my modest couple million and staking regularly. I've got a hunch we'll see something later.  Of course there's always a chance that as BTC becomes more widely known and used it actually makes alt coins less relevant rather than more.

P.S. what kind of bugs are you experiencing?

Asking serious question so if taken wrong please don't respond.

Has this coin been abandoned by the dev?

Just curious because for me the 1.5 version of wallet is still buggy as hell. Can't do nothing without it going into "(Not Responding)" anytime I click on anything. Takes forever to load and about 20 minutes just to get it to start staking because of it freezing up so much.

Does the 1.4.1 version still work or is that one on the wrong blockchain if I try and use it?

Thanks.

I can see the benefit in a relaunch or something, but it absolutely should only be done for good reason, not just in attempts to stir up some attention. I don't think changing the name is ideal personally either, just makes it seem weaker all around. Jackpot is a fitting title.

More gambling websites is a great idea though, I'd definitely play a bit to support and consider "staking" on the house.

I say we wait a bit.  Bitcoin was all over the place and then the holidays and stuff.  I definitely wasn't paying much attention and I probably watch all my coins closer than most people since I'm currently jobless and poor.  I have a lot of money tied up in electronics, car parts, and other crap i'm trying to sell, but losing 1btc through jpcdice and mintpal was at the completely wrong time for me.  If only I knew more about this crypto world back when volumes of alts were over 200btc/day and jpc was 60+...

Markets are all down and jpc didn't decline while they were declining, so I think it was due to finally lose it's stable 8 satoshi price.  I'm down quite a bit more on the other couple coins I didn't manage to sell a couple months ago.

maybe a good idea.. something has got to be done i think.. we have been too stagnant.

i am down let's do it  

.what ever "it" is LOL

EDIT:
It did not help things having JPCDice go down with drama..
Maybe a new gambling site would help ?
This link explains what happened *sort of hahaah
https://bitcointalk.org/index.php?topic=745422.860

Hey,

 I now conclude a Name Change, along with a New Release, may shake things up.

There's not much trading going on on few, if only One Exchanges.

It's Great to Mine and Stake, but a Million of Nothing is Nothing.

Tom

My point about the conf is you don't need one yet i see people handing out IP info all the time.
Try the simple stuff first !
And i find it hard to believe people can't connect like i said i have re-downloaded the block chain periodically and always end up with 16 connections
..with no conf

you guys realize a conf with with old nodes will NOT help you connect right ?
did you try checking what versions of the wallet each IP is using in your conf list ?
adding a list of outdated nodes will do far more harm than good.. but you all know this RIGHT ?

get rid of it then try it and maybe with a new wallet.dat file and see if it connects better and has lower usage maybe.
you guys are making things out to be way harder and worse sounding that it is.. and people say i am the drama queen LOL

get the .exe.. click it, done.
no .conf no this or that lol

and i have mine bouncing between 3 and 8% so i have no bloody idea what woudl cause yours to say 25%.. that is crazy high at least i think so on a 2500k ?

i ran the fucking .exce and get 3% or 8% bouncing back and forth in Task manager and never needed a conf before
so what the fuck is your problem all of you in the last 30 pages i have no bloody idea LOL
good luck with that my shit works fine and easy      

i HAVE caught bullshiters Trolling here by the way.. DO NOT FORGET THAT GUYS
I have lots of enemies and they LOOOOOOOOOOOOOOVE to troll around following me starting shit.

EDIT:
Oh and by the way you can't judge the CPU usage until the Block chain is FULLY updated..
Don't gimme this it's updating and at 25% usage crap lol
Because duuuuuuuuh ..ALL wallets are high usage when updating block chain when it gets up over a gig etc.. AKA: common sense.

I highlighted the part you missed. And yes, I use a conf file. I have 2+ million coins in that wallet.

Right on thanks Ritchie and you did not do it for nothing i bought 26k and sent it to my wallet and it worked good

FYI, sorry i should have posted a notice but we've been resycning the blockchain since the azure outtage a couple days ago.  I expect it to be back up tonight.  Sorry for the delay.

Thanks,
Richie@bittrex

What CPU though ?

On my machine staking around 586k coins i use about 2% to 13% (avg. about 8%) on my Intel 4770k Haswell CPU

So i don't know if i was staking on my Core 2 Duo e7500 i bet the CPU usage would be higher because it's a crappier CPU.. see what i mean ?
AND.. this would be the SAME high usage issue for ANY Proof Of Stake coin !

Right now there is 1,223,721 blocks

I also have re-downloaded the block chain from scratch periodically and never had any problem at all once.
i really can not comprehend why some of you are claiming you have problems.. i really don't get it !
i just looked now and any time i look i am connected to 16 or more connections and that is way more than enough and more than any coin i seen / used before.

And i had re-downloaded it lots too for many reasons and recently going back the start so i am not just saying that lol
I experimented by loading the Blockchain into Ramdisk software but i last had a power outage and when it cam back on my block chain was fucked up
so i had to re-download it all over again.. and once again it started right away ..none of this 4 days bullshit.
I find it hard to believe someone waited for days and didn't come here and bitch after waiting a day or two LOL

If you go back and read this topic there is never ending vague attacks on this coin.
guys post vague statements making all kinds of wild and vague claims.
they are trying to FUD the coin as they call it and i can almost guarantee guys are doing it because of me.. and we ALL know it too !

And you know what guys ?
It's pretty classy making us bend over backwards trying to help you over and over with the same problem for 50 straight pages.

If you know how wallets usually work then do the usual shit.. if it don't work still then ask for help.

Bitch and moan ? then provide details.. rather than NONE.
What did i you try and after 4 days of waiting Nanoprobe ? what CPU do you have ? do you use a conf ?

I never used a conf with Nodes in it before. it is not needed.. run it, eventually it syncs (it starts right away but takes for ever to finish)
It ain't rocket science.. run the .exe and wait LOL
High CPU usage ? read the last 20 or 30 pages..

I had problems getting 1.5 to sync but it finally did after 4 days. After it synced I was looking in the task manager for something else and noticed JPC was using 25% of the CPU resources on a 2600k. What's up with that? 25% just to stake. Not acceptable.

thanks for the VPN info !
I was able to solve my issue. It turned out to be my router. I logged in to check the port forwarding on it, and noticed it had changed. I changed it back to what it should be set for. I clicked "save", and the fricken thing locked up. Naturally, I hit the reset button, and now I have a nice lynksys brick....lol  I changed it to dd-wrt firmware 2-3 years ago, and it was working great till about a week ago  :/sigh Makes me wonder about new technology....leave it as it comes from the box, or tweak and modify the crap out of it so you get something that actually works right. Either way its useless or dead in 3-4 years.

hmm ya weird i did not notice that.. last time i asked Bittrex-Bill and he got back to me eventually maybe PM him ?
I told him i PM'd him because i could not find a main topic for the exchange here searching.

Bittrex-Bill

or maybe a better idea try PM'ing Ryan from Bittrex ?

chiznitz

here is my PM conversation i had with Bill ..on October 12, 2014 (Take it as you will)

Anyone know what is happening at Bttrex?  The trading for JPC has been disabled for two days. 

@Dotcommie
Whether i am leaving or not has no bearing on my comment
It is still a good warning etc !

it really does some odd so many people have problems.
I keep saying i don't get it and i can not reproduce the problem.
and by the sounds of it you would have to assume the coin is badly broken and works for very few people
*if you believe the constant comments that get posted here complaining about not being able to get synced.

go ahead and look back some pages in this topic and you will see people bitching non stop.
And i have been trying hard to not call them a liar etc LOL

Maybe you guys should report you problems to the dev because it seems most new users can't connect
with out coming to this topic and demanding the coin is broken  

don't forget there has been people leaving fake comments here to attack this coin too.