Is max.smalltimeminer.com pool down or running away? f, my maxcoins is still there...
can anyone launch in that pool?
Yeap, ping so high. Frequent disconnects from pool. can anyone launch in that pool?
Topic: [ANN][MAX] MAXcoin - PoW, ASIC Resistance, Keccak GPU Mining - page 135. (Read 914218 times)
February 17, 2014, 03:24:43 AM
February 17, 2014, 01:25:16 AM
can anybody tell me which software used for: http://max.1gh.com/
i would setup a similar pool in eu, i like the way to join pool without an regestration.
soft for pool or mining?i would setup a similar pool in eu, i like the way to join pool without an regestration.
for pool
February 17, 2014, 12:53:50 AM
Im mining with a r9 290x tri x and i get 480 mh/s (but i overclocked it)
I think you should get 350 mh/s
You have the right cgminer ?
I got cgminer 3.7.3. Can you post your conf file.
February 17, 2014, 12:37:58 AM
Hi,
Maybe someone could help me out here.
I got a r9 290 TRI-X GPU and I'm currently mining at 760Kh/s max!
Now, I see people here saying that they're mining at 100Mh/s on a gtx670.
This is my config:
I tried to set the config to the highest I can think of (I don't want to destroy my card), but my GPU is running at 31C (Really cold temp).
I'm guessing that I can push my card more. Any one had better luck with the 290s?
Thanks!
Maybe someone could help me out here.
I got a r9 290 TRI-X GPU and I'm currently mining at 760Kh/s max!
Now, I see people here saying that they're mining at 100Mh/s on a gtx670.
This is my config:
Quote
{
"pools" : [
{
"url" : "stratum+tcp://maxus.nut2pools.com:6010",
"user" : "*****",
"pass" : "*****"
}
]
,
"device" : "0",
"remove-disabled" : true,
"intensity" : "20",
"vectors" : "1",
"worksize" : "512",
"kernel" : "keccak",
"thread-concurrency" : "35960",
"gpu-engine" : "1300",
"gpu-fan" : "40-100",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "70",
"expiry" : "120",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "10",
"no-pool-disable" : true,
"no-submit-stale" : true,
"keccak" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "stratum+tcp://maxus.nut2pools.com:6010",
"user" : "*****",
"pass" : "*****"
}
]
,
"device" : "0",
"remove-disabled" : true,
"intensity" : "20",
"vectors" : "1",
"worksize" : "512",
"kernel" : "keccak",
"thread-concurrency" : "35960",
"gpu-engine" : "1300",
"gpu-fan" : "40-100",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "70",
"expiry" : "120",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "10",
"no-pool-disable" : true,
"no-submit-stale" : true,
"keccak" : true,
"kernel-path" : "/usr/local/bin"
}
I tried to set the config to the highest I can think of (I don't want to destroy my card), but my GPU is running at 31C (Really cold temp).
I'm guessing that I can push my card more. Any one had better luck with the 290s?
Thanks!
Im mining with a r9 290x tri x and i get 480 mh/s (but i overclocked it)
I think you should get 350 mh/s
You have the right cgminer ?
February 17, 2014, 12:23:59 AM
Hi,
Maybe someone could help me out here.
I got a r9 290 TRI-X GPU and I'm currently mining at 760Kh/s max!
Now, I see people here saying that they're mining at 100Mh/s on a gtx670.
This is my config:
I tried to set the config to the highest I can think of (I don't want to destroy my card), but my GPU is running at 31C (Really cold temp).
I'm guessing that I can push my card more. Any one had better luck with the 290s?
Thanks!
Maybe someone could help me out here.
I got a r9 290 TRI-X GPU and I'm currently mining at 760Kh/s max!
Now, I see people here saying that they're mining at 100Mh/s on a gtx670.
This is my config:
Quote
{
"pools" : [
{
"url" : "stratum+tcp://maxus.nut2pools.com:6010",
"user" : "*****",
"pass" : "*****"
}
]
,
"device" : "0",
"remove-disabled" : true,
"intensity" : "20",
"vectors" : "1",
"worksize" : "512",
"kernel" : "keccak",
"thread-concurrency" : "35960",
"gpu-engine" : "1300",
"gpu-fan" : "40-100",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "70",
"expiry" : "120",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "10",
"no-pool-disable" : true,
"no-submit-stale" : true,
"keccak" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "stratum+tcp://maxus.nut2pools.com:6010",
"user" : "*****",
"pass" : "*****"
}
]
,
"device" : "0",
"remove-disabled" : true,
"intensity" : "20",
"vectors" : "1",
"worksize" : "512",
"kernel" : "keccak",
"thread-concurrency" : "35960",
"gpu-engine" : "1300",
"gpu-fan" : "40-100",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "70",
"expiry" : "120",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "10",
"no-pool-disable" : true,
"no-submit-stale" : true,
"keccak" : true,
"kernel-path" : "/usr/local/bin"
}
I tried to set the config to the highest I can think of (I don't want to destroy my card), but my GPU is running at 31C (Really cold temp).
I'm guessing that I can push my card more. Any one had better luck with the 290s?
Thanks!
February 17, 2014, 12:19:05 AM
Is max.smalltimeminer.com pool down or running away? f, my maxcoins is still there...
can anyone launch in that pool?
can anyone launch in that pool?
February 17, 2014, 12:16:40 AM
If you help me cpu mine and it works I will donate to you!
contact me on PM, I'll answer any question. which OS do you have?I've tried using your pool a few times, but I'm wondering about the reporting page. Does "found by another pool" mean an orphaned block? I'm seeing my round contribution percentage on those blocks and I'm wondering why it's showing that if it's found by another pool. Also, I mined on your pool for over an hour and it showed 1.6 MAX for my 6.5GH/s the entire time. I ended up leaving since this is either extremely unlucky or something wrong.
It's a shame - I really wanted to use your pool instead of 1gh since my rejects are so much lower with you guys, and your fee is lower too. Just didn't understand why it was taking forever get payouts. I would have netted over 4 MAX on 1gh in that same time.
dwarfpool just found less blocks, you have to mine longer and you will get almost the same reward.
i have 1,9 ghz an my income in the last 12h was about 14 MAX.
February 16, 2014, 09:46:09 PM
February 16, 2014, 09:07:12 PM
If you help me cpu mine and it works I will donate to you!
contact me on PM, I'll answer any question. which OS do you have?I've tried using your pool a few times, but I'm wondering about the reporting page. Does "found by another pool" mean an orphaned block? I'm seeing my round contribution percentage on those blocks and I'm wondering why it's showing that if it's found by another pool. Also, I mined on your pool for over an hour and it showed 1.6 MAX for my 6.5GH/s the entire time. I ended up leaving since this is either extremely unlucky or something wrong.
It's a shame - I really wanted to use your pool instead of 1gh since my rejects are so much lower with you guys, and your fee is lower too. Just didn't understand why it was taking forever get payouts. I would have netted over 4 MAX on 1gh in that same time.
February 16, 2014, 08:47:28 PM
no one can help 
mJwwYBNCSXc6DUyu3PRtoUPr19yY9eGmKG
Click on my signature mJwwYBNCSXc6DUyu3PRtoUPr19yY9eGmKG
well that sucked
February 16, 2014, 08:43:09 PM
no one can help mJwwYBNCSXc6DUyu3PRtoUPr19yY9eGmKG
Click on my signature mJwwYBNCSXc6DUyu3PRtoUPr19yY9eGmKG February 16, 2014, 08:41:30 PM
no one can help mJwwYBNCSXc6DUyu3PRtoUPr19yY9eGmKG
mJwwYBNCSXc6DUyu3PRtoUPr19yY9eGmKG February 16, 2014, 08:26:27 PM
We released MaxCoin CPUMiner for Mac OS X 64-bit (10.8, 10.9):
http://maxdl.1gh.com/cpuminer-mac64.zip
from offic. topic http://maxdl.1gh.com/cpuminer-mac64.zip
February 16, 2014, 07:34:36 PM
If you help me cpu mine and it works I will donate to you!
contact me on PM, I'll answer any question. which OS do you have?....PM sent thank you.
February 16, 2014, 07:28:22 PM
If you help me cpu mine and it works I will donate to you!
contact me on PM, I'll answer any question. which OS do you have? February 16, 2014, 07:24:21 PM
I AM MINNING ON MAXCOINPOOL.COM WITH MORE THEN 3000MH/S BUT AFTER 4 HOURS I MADE ONLY 1.56 COIN IS IT RIGHT OR PLEASE SUGGEST ME ANY BETTER POOL PLEASE TTHANKS
at the moment 3000mhs gives ca. 50 MAX/day
http://dwarfpool.com/max/calc
is it worth CPU mining?
CPU works as well, but so many MHs you cannot get with it. Radeon 7950 gives ca. 250MHs
If you help me cpu mine and it works I will donate to you!
February 16, 2014, 07:22:13 PM
Please help AntiKeiserCoin by upvoting (not downvoting)
http://www.reddit.com/r/CoinedUp/comments/1y264t/request_to_add_akc_fairest_coin/
February 16, 2014, 07:17:15 PM
I AM MINNING ON MAXCOINPOOL.COM WITH MORE THEN 3000MH/S BUT AFTER 4 HOURS I MADE ONLY 1.56 COIN IS IT RIGHT OR PLEASE SUGGEST ME ANY BETTER POOL PLEASE TTHANKS
at the moment 3000mhs gives ca. 50 MAX/day
http://dwarfpool.com/max/calc
is it worth CPU mining?
CPU works as well, but so many MHs you cannot get with it. Radeon 7950 gives ca. 250MHs
February 16, 2014, 07:10:18 PM
I AM MINNING ON MAXCOINPOOL.COM WITH MORE THEN 3000MH/S BUT AFTER 4 HOURS I MADE ONLY 1.56 COIN IS IT RIGHT OR PLEASE SUGGEST ME ANY BETTER POOL PLEASE TTHANKS
at the moment 3000mhs gives ca. 50 MAX/day
http://dwarfpool.com/max/calc
is it worth CPU mining?
February 16, 2014, 07:03:06 PM
I AM MINNING ON MAXCOINPOOL.COM WITH MORE THEN 3000MH/S BUT AFTER 4 HOURS I MADE ONLY 1.56 COIN IS IT RIGHT OR PLEASE SUGGEST ME ANY BETTER POOL PLEASE TTHANKS
at the moment 3000mhs gives ca. 50 MAX/day
http://dwarfpool.com/max/calc
Jump to: