🔥🔥[ANN][MINTME]🌎MintMe.com Coin⚡️CPU mining⚡️DApps via Websites🚀No ICO/ASIC - page 54.

webchain-network

copper member

Activity: 182

Merit: 5

Quote from: AnUser92 on July 30, 2018, 01:20:25 PM

Quote from: albertod on July 30, 2018, 10:25:35 AM

Quote from: AnUser92 on July 30, 2018, 08:53:54 AM

Hi, I just discovered this project. It looks good and intersting. However, i'm getting very low hashrate on my laptop (i5) (~40h/s on the command line and only 27h/s on the pool). I heard that I can activate "huge page" but I don't think it's possible on windows 10 home.

Windows 10 home happens to miss the possibility to enable huge pages. Some other users have suggested using this http://awesomeprojectsxyz.blogspot.com/2017/11/windows-10-home-how-to-enable-lock.html. You can have a look and decide whether it's good for you.

Hi thanks for the tip my hashrate is greater!! However when I launch my miner, it says that "Huge pages are disabled" Huh

edit : I needed to reboot my computer Grin

Yes, you know windows is special and sometimes requests reboot. Good it was helpful.

AnUser92

newbie

Activity: 78

Merit: 0

Hi, I have two questions:
-First why there are big differences between the pool (typemine) and the miner
-and is webchain a fork from eth or etc?

AnUser92

newbie

Activity: 78

Merit: 0

Quote from: albertod on July 30, 2018, 10:25:35 AM

Quote from: AnUser92 on July 30, 2018, 08:53:54 AM

Hi, I just discovered this project. It looks good and intersting. However, i'm getting very low hashrate on my laptop (i5) (~40h/s on the command line and only 27h/s on the pool). I heard that I can activate "huge page" but I don't think it's possible on windows 10 home.

Windows 10 home happens to miss the possibility to enable huge pages. Some other users have suggested using this http://awesomeprojectsxyz.blogspot.com/2017/11/windows-10-home-how-to-enable-lock.html. You can have a look and decide whether it's good for you.

Hi thanks for the tip my hashrate is greater!! However when I launch my miner, it says that "Huge pages are disabled" Huh

edit : I needed to reboot my computer Grin

webchain-network

copper member

Activity: 182

Merit: 5

The team has just released a new wallet version, not a substancial visual redesign, but relevant changes have been made on the internal side. Find it here: https://github.com/webchain-network/webchain-wallet/releases

Note: Everything should work smoothly, but if you cannot see your WEB accounts after upgrading, simply reinstall the old version. It should not be necessary for 99% of the cases though:
1) export all your accounts,
2) then install the new update and
3) import the accounts

albertod

newbie

Activity: 196

Merit: 0

Quote from: AnUser92 on July 30, 2018, 08:53:54 AM

Hi, I just discovered this project. It looks good and intersting. However, i'm getting very low hashrate on my laptop (i5) (~40h/s on the command line and only 27h/s on the pool). I heard that I can activate "huge page" but I don't think it's possible on windows 10 home.

Windows 10 home happens to miss the possibility to enable huge pages. Some other users have suggested using this http://awesomeprojectsxyz.blogspot.com/2017/11/windows-10-home-how-to-enable-lock.html. You can have a look and decide whether it's good for you.

albertod

newbie

Activity: 196

Merit: 0

Quote from: Unmoustugi on July 29, 2018, 04:59:28 PM

Hello, fellows.
You must to add token details to allow participants to join the business!

Hello unmoustugi, what details do you mean exactly? Most of the details of the coin are on the official site. Let us know anyway if you consider we're missing something. Wink

albertod

newbie

Activity: 196

Merit: 0

Quote from: Tangri on July 29, 2018, 04:53:58 PM

Hello Webers,

Just discovered this nice coin and started mining it. But ran into some problem.

2x X5670 processor with 6 + 6ht ea.

I was getting low 160ish hash initially with 12 core/null setup. But I was thinking its low and turned off HT on bios, and now its around 340ish hash.

I tried to see if I could set cpu affinity setting, but I don't understand mask number system. I know its binary but I am too stupid to comprehend it.

Can some one help me with correct affinity setting so that, I can keep HT on, and have miner ignore it? So that miner just uses 12 main cores.

I really appreciate your help.

Thanks.

The hex format is not supported yet, devs have been reported of this and they are working on it. Meanwhile you can set your affinity using the decimal value. Calculate the binary number according to the number of threads and then convert it here

AnUser92

newbie

Activity: 78

Merit: 0

Hi, I just discovered this project. It looks good and intersting. However, i'm getting very low hashrate on my laptop (i5) (~40h/s on the command line and only 27h/s on the pool). I heard that I can activate "huge page" but I don't think it's possible on windows 10 home.

albertod

newbie

Activity: 196

Merit: 0

Quote from: voteformeg on July 28, 2018, 09:44:53 AM

realy missed the start off this one , it is also good that not much people mine this , better for me when i start mining this , let's see if it is still worth after missing the start , long ago that i used my cpu for mining

Hello! You're on time to join, let us know your feedback on the miner. Wink

Tangri

newbie

Activity: 48

Merit: 0

Quote from: whotheff on July 29, 2018, 06:10:30 PM

Quote from: Tangri on July 29, 2018, 04:53:58 PM

Hello Webers,

Just discovered this nice coin and started mining it. But ran into some problem.

2x X5670 processor with 6 + 6ht ea.

I was getting low 160ish hash initially with 12 core/null setup. But I was thinking its low and turned off HT on bios, and now its around 340ish hash.

I tried to see if I could set cpu affinity setting, but I don't understand mask number system. I know its binary but I am too stupid to comprehend it.

Can some one help me with correct affinity setting so that, I can keep HT on, and have miner ignore it? So that miner just uses 12 main cores.

I really appreciate your help.

Thanks.

you can use -t switch specify number of cores used. For example: -t 3 limits the number of cores to 3. The webchain algo needs about 2mb of L3 cache per core, so you can divide your L3 by 2 and set the resulted number after -t

Thanks. Solved.

whotheff

member

Activity: 762

Merit: 35

Quote from: Tangri on July 29, 2018, 04:53:58 PM

Hello Webers,

Just discovered this nice coin and started mining it. But ran into some problem.

2x X5670 processor with 6 + 6ht ea.

I was getting low 160ish hash initially with 12 core/null setup. But I was thinking its low and turned off HT on bios, and now its around 340ish hash.

I tried to see if I could set cpu affinity setting, but I don't understand mask number system. I know its binary but I am too stupid to comprehend it.

Can some one help me with correct affinity setting so that, I can keep HT on, and have miner ignore it? So that miner just uses 12 main cores.

I really appreciate your help.

Thanks.

you can use -t switch to specify number of cores used. For example: -t 3 limits the number of cores to 3. The webchain algo needs about 2mb of L3 cache per core, so you can divide your L3 by 2 and set the resulted number after -t

Unmoustugi

newbie

Activity: 54

Merit: 0

Hello, fellows.
You must to add token details to allow participants to join the business!

Tangri

newbie

Activity: 48

Merit: 0

Hello Webers,

Just discovered this nice coin and started mining it. But ran into some problem.

2x X5670 processor with 6 + 6ht ea.

I was getting low 160ish hash initially with 12 core/null setup. But I was thinking its low and turned off HT on bios, and now its around 340ish hash.

I tried to see if I could set cpu affinity setting, but I don't understand mask number system. I know its binary but I am too stupid to comprehend it.

Can some one help me with correct affinity setting so that, I can keep HT on, and have miner ignore it? So that miner just uses 12 main cores.

I really appreciate your help.

Thanks.

voteformeg

legendary

Activity: 1932

Merit: 1005

realy missed the start off this one , it is also good that not much people mine this , better for me when i start mining this , let's see if it is still worth after missing the start , long ago that i used my cpu for mining

albertod

newbie

Activity: 196

Merit: 0

Quote from: Perog2 on July 27, 2018, 10:47:13 AM

Quote from: albertod on July 27, 2018, 08:57:54 AM

Hi perog, seems like people haven't considered the profitability of mining the coin, probably because they check the price and they don't like it. The team keeps doing its job and we are sure the coin will stop being undervalued anytime soon and that's why we keep inviting users to join and help secure the network while making profit.

I think you're right. Maybe it's worth adding the web to resources like whattomine.com and cryptunit.com?

We've been collecting those sites. I added those two to the list. Thank you so much.

albertod

newbie

Activity: 196

Merit: 0

Quote from: ?? on ??

Looking forward for more updates! Good approach, amazing plan. Good luck DEVs.

Hello! Thanks for your wishes. Don't go too far, updates are coming.

Perog2

member

Activity: 111

Merit: 11

Branding and graphic design on the blockchain.

Quote from: albertod on July 27, 2018, 08:57:54 AM

Hi perog, seems like people haven't considered the profitability of mining the coin, probably because they check the price and they don't like it. The team keeps doing its job and we are sure the coin will stop being undervalued anytime soon and that's why we keep inviting users to join and help secure the network while making profit.

I think you're right. Maybe it's worth adding the web to resources like whattomine.com and cryptunit.com?

albertod

newbie

Activity: 196

Merit: 0

Quote from: Perog2 on July 27, 2018, 05:12:51 AM

I wonder why there are so few miners? The difficulty makes it possible to confidently hold a profit of $1.8-2/day from 1 kh/s.

Hi perog, seems like people haven't considered the profitability of mining the coin, probably because they check the price and they don't like it. The team keeps doing its job and we are sure the coin will stop being undervalued anytime soon and that's why we keep inviting users to join and help secure the network while making profit.

Perog2

member

Activity: 111

Merit: 11

Branding and graphic design on the blockchain.

I wonder why there are so few miners? The difficulty makes it possible to confidently hold a profit of $1.8-2/day from 1 kh/s.

justincase1911

newbie

Activity: 17

Merit: 0

Quote from: juice_099 on July 26, 2018, 05:24:51 PM

We have updated Webchain page with our team information. Here we are https://webchain.network/team. We are fully remote company, some of us work with each other for many years. We will later update our page also with additional information about the company and our goals. Other than working on goals from our roadmap, we are currently busy with adding few important features like mining Webchain on Coinimp and some secret ones. This project revelead only around 30% of it's goals. Why not 100% or even 300% :wink: like some other? because we are afraid someone will steal our ideas. We use private repo which is hot from our commits, recent random screenshot: http://take.ms/4AYC3 and it's absolutely not even peak time for us so normally in few hours we work even harder. All our efforts are connected to Webchain and ecosystem we are building around it. Webchain project in itself is interesting enough to hold on it's own, but it will truly thrive when we finish all our plans and only then you will be able to see full WEB potential.

sounds nice, great team and nice strategy. this team is doing well, keep it on guys

Topic: 🔥🔥[ANN][MINTME]🌎MintMe.com Coin⚡️CPU mining⚡️DApps via Websites🚀No ICO/ASIC - page 54. (Read 85225 times)