[ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange - page 42.

Taxidermista

legendary

Activity: 1148

Merit: 1001

Quote from: dragonmike on May 19, 2014, 05:23:42 PM

Guys, anyone else getting rejections and disconnects with reason "unauthorized worker" suddenly? No idea why it does that. It works well a few minutes and then bang, "unauthorized worker", all rejected, and back to failover I go :-(

EDIT: I'm on the X11 pool btw

I've just switched from port 4440 to port 3440. I don't see anything strange in my workers.

dragonmike

hero member

Activity: 1274

Merit: 556

Guys, anyone else getting rejections and disconnects with reason "unauthorized worker" suddenly? No idea why it does that. It works well a few minutes and then bang, "unauthorized worker", all rejected, and back to failover I go :-(

EDIT: I'm on the X11 pool btw

Taxidermista

legendary

Activity: 1148

Merit: 1001

Quote from: bullus on May 19, 2014, 04:46:43 PM

Merc,

If I mine a specific coin than I don't see any info of my stats, only the top 5.
Can u change that, like it is for example at a dedicatedpool?

I'm mining CTZ now.

I don't see CTZ in the multiport. Is it working for you?

bullus

sr. member

Activity: 294

Merit: 250

Merc,

If I mine a specific coin than I don't see any info of my stats, only the top 5.
Can u change that, like it is for example at a dedicatedpool?

I'm mining CTZ now.

gpuminer

full member

Activity: 210

Merit: 100

Hey TMB , possible to add Asia pacific STRATUM ? There should be quite a number of Asian around (Chinese miner)

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

thanks merc82, i understood now!

keep on the good job!

merc82

sr. member

Activity: 354

Merit: 254

Owner of MiningRigRentals

Quote from: _javi_ on May 19, 2014, 11:33:28 AM

obsidian009: it looks normal to me. X11 seems to give out these numbers (very low WU compared to scrypt)

I´m new to X11 too. (old time scrypt miner).
I still dont understand the "Profit Rankings".
I know the hashrate for X11 is 2.9x hashrate for scrypt.
but what does the "BTC/MHash is normalized to SCRYPT" mean?
Should we divide the x11 profit for 2.9, or is it already accounted for (normalized?) ?

I attempted to make this clearer by putting it in the home page profit table header:
"BTC/MHash is normalized to SCRYPT. N-Scrypt is Scrypt*0.47 and X11 is Scrypt*2.9"

What this means is that when calculating the daily BTC per MHash, we use the following:
1mhash scrypt
0.47mhash for nscrypt
2.9mhash for x11

So if you see RTC at 0.09 BTC/scryptMhash/Day, that means 2.9mhash of x11 is roughly worth 0.09btc a day (at that particular moment in time)

These numbers aren't the same for everyone, but it is what I came up with as 'real world numbers' from speaking with many of our miners.

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

obsidian009: it looks normal to me. X11 seems to give out these numbers (very low WU compared to scrypt)

I´m new to X11 too. (old time scrypt miner).
I still dont understand the "Profit Rankings".
I know the hashrate for X11 is 2.9x hashrate for scrypt.
but what does the "BTC/MHash is normalized to SCRYPT" mean?
Should we divide the x11 profit for 2.9, or is it already accounted for (normalized?) ?

obsidian009

newbie

Activity: 6

Merit: 0

I've been mining Scrypt coins on TMB for some time and decided to try out x11. I'm a little confused with some output from sgminer though... My hashrate seems fine, and I see accepted shares at the bottom of the screen...but at the top for the 5s avg, Accepts hardly changes. Stays at 0 for quite some time, and even after running for awhile it may go up to 3 or 4. My worker units is also very very low -- is this normal for sgminer?

Here's a screenshot of my sgminer output:

http://s12.postimg.org/vadhx21kd/sgminer1.png

Shouldn't I be seeing more accepted shares (instead of A:0) ?

Any thoughts why this is happening?

Thanks

P.S.
Here's my sgminer config
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --kernel darkcoin --lookup-gap 2 --thread-concurrency 11200 -g 2 -I 13 --worksize 256 --auto-fan --gpu-fan 30-80,30-80,30-80 --temp-cutoff 90,90,90 --temp-overheat 85,85,85 --temp-target 72,72,72 --gpu-memclock 1500,1500,1500 --gpu-engine 1100,1100,1100 --gpu-powertune -20,-20,-20 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale -o stratum+tcp://east01.us.trademybit.com:3437 -u -p --failover-only -o stratum+tcp://west01.us.trademybit.com:4440 -u -p

I've tried taking out lots of the additional variables and modifying them...only results in lowered hashrates and no change in accepted shares.

ebeth08

full member

Activity: 168

Merit: 100

Twitter - @hashking

Quote from: gpuminer on May 18, 2014, 07:30:35 AM

X11 pool need to add more non pos coins. A lot of listed coin are limitd POW pos coin. Their POW will end in less than a week. Sooner or later x11 pool will be left with nothing much to mine. Also, please clear up x11 pool coin. There are a few coin which POW already ended but still listed on x11 coin list

Here is a list of x11 coins. https://bitcointalksearch.org/topic/the-official-x11-thread-updated-dailynow-with-increased-mh-593901

There are quite a number of new non pos coins coming up. New one are create every other day. Hopefully the list of coins on x11 will be half as much as scrypt so that x11 wouldn't be left with nothing to mine.

I hope trademybit can specialize in mining x11 because that is the future for miner, at least for the next couple of months and more

Not really an issue of running out of x11 coins to mine. You said it yourself, "New one are create every other day." x11 is here to stay, so there will never be a shortage of x11 coins to add. Just saying.

ebeth08

full member

Activity: 168

Merit: 100

Twitter - @hashking

Need better dashboard stats. I would like to be able to see how many coins per block where awarded to me for each coin. This shouldn't be that hard to do. Also, stats under balance take WAY to long to update.

gpuminer

full member

Activity: 210

Merit: 100

X11 pool need to add more non pos coins. A lot of listed coin are limitd POW pos coin. Their POW will end in less than a week. Sooner or later x11 pool will be left with nothing much to mine. Also, please clear up x11 pool coin. There are a few coin which POW already ended but still listed on x11 coin list

Here is a list of x11 coins. https://bitcointalksearch.org/topic/the-official-x11-thread-updated-dailynow-with-increased-mh-593901

There are quite a number of new non pos coins coming up. New one are create every other day. Hopefully the list of coins on x11 will be half as much as scrypt so that x11 wouldn't be left with nothing to mine.

I hope trademybit can specialize in mining x11 because that is the future for miner, at least for the next couple of months and more

dmpotter

full member

Activity: 168

Merit: 100

Quote from: grendel25 on May 17, 2014, 04:31:03 PM

Okay... anyone mine with a 750 ti and can share their config? I mostly get some wiered rcv_line fail error reconnect in 15 seconds over and over..

oh yeah, wanted to try for x11

edit... i swear it seems to start working as soon as I post on here... wtf. seems to be working now

isn't that the truth, happens to me too

dmpotter

full member

Activity: 168

Merit: 100

Quote from: grendel25 on May 17, 2014, 04:43:39 PM

Another question: On the home page for the table of profit rankings it says "port" and then "special miner" do I need to set my port to match that or do I just do the 4440 port if I want x11 and it will automatically go to the special port? Why list that port? sort of confusing

Just set it for the 4444 port

grendel25

legendary

Activity: 2296

Merit: 1031

Another question: On the home page for the table of profit rankings it says "port" and then "special miner" do I need to set my port to match that or do I just do the 4440 port if I want x11 and it will automatically go to the special port? Why list that port? sort of confusing

grendel25

legendary

Activity: 2296

Merit: 1031

Okay... anyone mine with a 750 ti and can share their config? I mostly get some wiered rcv_line fail error reconnect in 15 seconds over and over..

oh yeah, wanted to try for x11

edit... i swear it seems to start working as soon as I post on here... wtf. seems to be working now

zqjqiu

member

Activity: 92

Merit: 10

Income may not be normal, Europecoin(ERC) now Reward is 5000, but the site is 10000, each M gain of 0.00386 may not be accurate.

http://pan.baidu.com/s/1i3r9ApJ
http://pan.baidu.com/s/1i3j2frf

sandpaper

sr. member

Activity: 373

Merit: 250

Suggestion: Is it possible to move hashing power more evenly as to not destroy the coin / hard fork it too quickly?

IE, coinshift approach of smoothly applying hash power to multiple coins to even out the playing field for all of them?

If it's already something that TMB does, my bad.

dmpotter

full member

Activity: 168

Merit: 100

Quote from: grendel25 on May 16, 2014, 03:16:26 PM

merc82, I have a question regarding X11 and the sgminer page linked: how do I get it to work on it's own if it switches between algos?

I did a print page and scanned... all I could find was another guy with a question but no answer:

"Regarding the multiple kernels in the same bat, is it possible to also have some kind of auto-detect that automatically switches kernel depending on the algo the pool is reporting? Grin

"

Is there a -k to catch all x11 or would I have to manually switch on my own?

Edit: looks like people are just doing -k darkcoin as a default? That right?

Ya seems darkcoin kernel only. Been working for me just fine.

grendel25

legendary

Activity: 2296

Merit: 1031

merc82, I have a question regarding X11 and the sgminer page linked: how do I get it to work on it's own if it switches between algos?

I did a print page and scanned... all I could find was another guy with a question but no answer:

"Regarding the multiple kernels in the same bat, is it possible to also have some kind of auto-detect that automatically switches kernel depending on the algo the pool is reporting? Grin

"

Is there a -k to catch all x11 or would I have to manually switch on my own?

Edit: looks like people are just doing -k darkcoin as a default? That right?

Topic: [ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange - page 42. (Read 153100 times)