Topic: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 49. (Read 368268 times)

Quote from: sepehr on May 31, 2014, 01:08:21 AM

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

This is a picture of My Dusty second hand, received S1 Antminer:

For more quality picture visit here:

http://forgeco.in/images/Second_Hand_S1.jpg

Hi,
Please PM us your order ID, our tech guy will help you out.
May you confirm above board dated 16/12/2013? All units shipped out recently must be assembled with new boards, which were produced recently.

I sent you the Order ID's
Also all boards I received before 29/5/2014 are dated 16/12/2013 They all ordered within last month.

I never received an S1 with a spec of dust on it and I get them about every week. Either very bad luck or I call BS

And when were your boards manufactured??

16/12/2013 written on it.

I know. I was talking to Bjalbert since he seemed to be calling you out and claimed he never received an old machine.

Just FYI, Bitmain accepted to send me some S1 Coupons for Apologize! Undecided

At least they accepted their fault!

samsonn25

hero member

Activity: 882

Merit: 1003

Quote from: samsonn25 on May 30, 2014, 09:49:07 AM

Quote from: samsonn25 on May 30, 2014, 09:49:07 AM

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

This is a picture of My Dusty second hand, received S1 Antminer:

For more quality picture visit here:

http://forgeco.in/images/Second_Hand_S1.jpg

Hi,
Please PM us your order ID, our tech guy will help you out.
May you confirm above board dated 16/12/2013? All units shipped out recently must be assembled with new boards, which were produced recently.

I sent you the Order ID's
Also all boards I received before 29/5/2014 are dated 16/12/2013 They all ordered within last month.

I never received an S1 with a spec of dust on it and I get them about every week. Either very bad luck or I call BS

And when were your boards manufactured??

16/12/2013 written on it.

I know. I was talking to Bjalbert since he seemed to be calling you out and claimed he never received an old machine.

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

AntMiner S2 1TH/s Kit Sales Open

S2 Kit Items List
1. 10 Hash Boards;
2. 1 Power Board;
3. 1 set of IO Board + BB Board + SD card;
4. 2 sets of Fans + Fans’ cover;
5. 1 LCD screen;

S2 Kit Specs
1. Hash Rate: 1,000GH/s (100.4G/s per hash borad);
2. Power Consumption: less than 1,100W from the wall;
3. Power Efficiency: Around 1.1Watt/GH/s if you use 80PLUS GOLD;

Parts NOT Included
1. PSU: you shall prepare your own PSU, which is able to deliver at least 1000W at 12V, recommend 80PLUS GOLD. One Power Board includes 6 PCI-e input interfaces, which need to be connected to PSU if you'd like to assemble full 10 hash boards;
2. Case and Hash Board Holder;
3. Ethernet cable;
4. Brace to hold the fans;

Upgradable
All AntMiner S2 and S2 kit will be adapted to the Hash Boards with next generation chips. Clients can freely choose the upgrade version Hash Boards to replace the ones in hands.

Kind Reminder:
if you are skilled in playing and assembling hardware, DIY is great fun. But if you are a newbie in assembling and setting up hardware, please be very careful to place the order.

Contact: [email protected]
URL: https://www.bitmaintech.com

sepehr

sr. member

Activity: 399

Merit: 250

Cryptocurrency Evangelist

Quote from: CroverNo01 on May 30, 2014, 07:35:50 AM

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

This is a picture of My Dusty second hand, received S1 Antminer:

For more quality picture visit here:

http://forgeco.in/images/Second_Hand_S1.jpg

Hi,
Please PM us your order ID, our tech guy will help you out.
May you confirm above board dated 16/12/2013? All units shipped out recently must be assembled with new boards, which were produced recently.

I sent you the Order ID's
Also all boards I received before 29/5/2014 are dated 16/12/2013 They all ordered within last month.

I never received an S1 with a spec of dust on it and I get them about every week. Either very bad luck or I call BS

And when were your boards manufactured??

16/12/2013 written on it.

tzortz

hero member

Activity: 728

Merit: 500

And who will be mining until then?

kendog77

hero member

Activity: 742

Merit: 500

Quote from: Threader on May 29, 2014, 06:51:11 AM

"AntMiner’s S3 chips are projected to be out this July."

http://www.coindesk.com/private-china-meeting-bitcoin-mining-industry-leaders/

Got an email from Bitmain saying June - but mass roll out July Grin

5Th/s maybe - hope they learn lessons with design

Wow, I can't wait. On one hand, the S3 should be epic (2-3TH at .5W/GH), but on the other hand, it will probably help knock most of the S1s off of the network unless the price of BTC soars.

All of the new hashrate scheduled to come online during the next 2-3 months makes me not want to buy anymore hardware until more efficient stuff (~.5W/GH) is available.

samsonn25

hero member

Activity: 882

Merit: 1003

Quote from: Threader on May 29, 2014, 06:51:11 AM

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

This is a picture of My Dusty second hand, received S1 Antminer:

For more quality picture visit here:

http://forgeco.in/images/Second_Hand_S1.jpg

Hi,
Please PM us your order ID, our tech guy will help you out.
May you confirm above board dated 16/12/2013? All units shipped out recently must be assembled with new boards, which were produced recently.

I sent you the Order ID's
Also all boards I received before 29/5/2014 are dated 16/12/2013 They all ordered within last month.

I never received an S1 with a spec of dust on it and I get them about every week. Either very bad luck or I call BS

And when were your boards manufactured??

CroverNo01

sr. member

Activity: 546

Merit: 269

"AntMiner’s S3 chips are projected to be out this July."

http://www.coindesk.com/private-china-meeting-bitcoin-mining-industry-leaders/

Got an email from Bitmain saying June - but mass roll out July Grin

5Th/s maybe - hope they learn lessons with design

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

We have a short shipping break due to Chinese traditional festivals, orders dropped after 18:00pm on May 30 (Beijing Time GMT +8), will be shipped out starting from June 3rd.

Happy Mining!

BITMAIN

bjalbert

full member

Activity: 166

Merit: 100

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

This is a picture of My Dusty second hand, received S1 Antminer:

For more quality picture visit here:

http://forgeco.in/images/Second_Hand_S1.jpg

Hi,
Please PM us your order ID, our tech guy will help you out.
May you confirm above board dated 16/12/2013? All units shipped out recently must be assembled with new boards, which were produced recently.

I sent you the Order ID's
Also all boards I received before 29/5/2014 are dated 16/12/2013 They all ordered within last month.

I never received an S1 with a spec of dust on it and I get them about every week. Either very bad luck or I call BS

sepehr

sr. member

Activity: 399

Merit: 250

Cryptocurrency Evangelist

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

This is a picture of My Dusty second hand, received S1 Antminer:

For more quality picture visit here:

http://forgeco.in/images/Second_Hand_S1.jpg

Hi,
Please PM us your order ID, our tech guy will help you out.
May you confirm above board dated 16/12/2013? All units shipped out recently must be assembled with new boards, which were produced recently.

I sent you the Order ID's
Also all boards I received before 29/5/2014 are dated 16/12/2013 They all ordered within last month.

Threader

sr. member

Activity: 406

Merit: 250

"AntMiner’s S3 chips are projected to be out this July."

http://www.coindesk.com/private-china-meeting-bitcoin-mining-industry-leaders/

ktzhan

newbie

Activity: 40

Merit: 0

Quote from: taipo on May 26, 2014, 11:38:45 PM

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

Hi sepehr, I am sorry for the mistake made by our stuff.
We are looking for the reason and checking our procedure now.
Please contact with our sales for support.
I am so sorry again.

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

One of the S1's I bought from them looked like it had endured some rigorous "pretesting/burning in"...the rest looked brand new though.

Hi
May you send the order ID and photos of the miner you referred to [email protected], we will take care of your case carefully.

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

Quote from: samsonn25 on May 25, 2014, 11:46:02 PM

I have received 6xS1 Antminers yesterday.
2 Out of 6 of these Antminers was not working properly!
Their Fan was not working and when I opened their Fan I understood that they are for sure Second Hand, The Radiator behind Fan was full of dust and it certainly show that Bitmain is selling his worked S1 Antminers to market!
It is not a good way of business!!!

This is a picture of My Dusty second hand, received S1 Antminer:

For more quality picture visit here:

http://forgeco.in/images/Second_Hand_S1.jpg

Hi,
Please PM us your order ID, our tech guy will help you out.
May you confirm above board dated 16/12/2013? All units shipped out recently must be assembled with new boards, which were produced recently.

taipo

full member

Activity: 238

Merit: 100

Kia ora!

One of the S1's I bought from them looked like it had endured some rigorous "pretesting/burning in"...the rest looked brand new though.

samsonn25

hero member

Activity: 882

Merit: 1003

I had a few I ordered feb^mar and they were dated like jan 4

sepehr

sr. member

Activity: 399

Merit: 250

Cryptocurrency Evangelist