[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 119.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: jp1981 on December 16, 2017, 03:25:23 PM

Are there any issues again with BTC auto exchange?
I have only received half of what I am suppose t receive. Whats going on with this pool?

None that I'm aware of; the exchanges are not performed by the pool (the exchanges are Bittrex, Yobit and Poloniex).
Please can you provide the information that you are looking at to make the comparison?

sir_blacks

jr. member

Activity: 119

Merit: 3

Quote from: aaronsace on December 16, 2017, 04:31:51 PM

NiceHash are not 'nice' people contrary to their name.

MultiPoolMiner can launch Excavator on it's own.

well if you refer to last bad think done with hack yes i can undestend your point. but Excavator like miner is very good one stable, good speed, plenty config option & zawawa when was work on this miner app was done a great job, sadly he was stop to work for but is perfectly undestanble

he was lucky was get out before mess was hit the ...

anyway thx to you i undestend way was refuse to work, thx agen for that!!! but i will pass for use tertiary (3'rd) app only to can run what i need to run, hope in future this block it will lift

thx for suggestion

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: wishxy on December 16, 2017, 06:37:55 AM

Houston, we got a problem!

How can I move back my XMR from Debit AE to Credited wallet?

https://prnt.sc/ho91l6

If you've exchanged it it to BTC then you will have to withdraw.

If you have exchanged it for another coin (not BTC) then you can set the exchange coin to XMR then move the amount back to the exchange:
https://miningpoolhub.com/?page=account&action=autoexchange

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: ?? on ??

Quote

If you are confused then just leave the pool to do its work unless you have a more specific question about the information you are looking at.

Very big stupid anwser.

I try my best.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: especial on December 16, 2017, 10:35:36 AM

what happened with eth pool??
i am mining now for 2 days and no profit, mining works ok but nothing shows in my balance, pool url is down

Check you don't have the worker problem that SuperDerpBro had above.

Is your worker listed here:
https://ethereum.miningpoolhub.com/index.php?page=account&action=workers

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: wappi on December 16, 2017, 07:13:43 AM

Hi, i have a few questions about hasherate and auto switch algo.

I use awesome miner set to only mine Lyra2rev2, Lyra2z and equihash and autoswitch every 45min. I have miningpoolhub set on nvidia for the same algo switching.

What i see on dashboard or on pool stat in miningpoolhub, my estimate hashrate/earning per day of x coin lets use lyra2rev2 for exemple. My problem is it take around 30 min of mining to show my almost real hashrate on miningpoolhub, but if miningpoolhub decide monacoin is less profitable and switch to vertcoin then my hashrate goes back to poo at half maybe less 60mh instead of 120mh, so if that happen multiple time i get stuck on those low number.

This means i am only getting half of the earning most of the time. What am i doing wrong? or do i get it complety wrong.

I saw on reddit that MultiPoolMiner may be better, why is that? better implamentation with mining pool hub? I tried nemosminer last week on zpool but even if my earning where better than they are now, due to i presume luck or nicehack, my rig crash several times. Awesome miner is at least, for me, stable 24/7.

To summarize is auto switch bad for a small rig?

Thanks,
Wpp

Try MultiPoolMiner without Lyra2rev2 and Lyra2z then you should get fairly accurate profits.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: Max3k on December 16, 2017, 01:43:43 PM

I apologize for the stupid question, can't understand how a pool works. I use NemosMiner, which seems to be doing something, something switches, something there with all sorts of colorful inscriptions where promise the gold mountains =) But all these promises in 0.001btc/day turned into in 0.0004 for 2 days of work. The rate my client is not displayed in any of the active pools, nevertheless, coins appear in my balance... Is it correct to use such software for this pool? Maybe he uses the wrong ports (17***), address for mining (stratum+tcp://hub.miningpoolhub.com)?

If use a regular client manually and with other ports (20XXX) in this case, I see client on site, but, its speed is 2 times less than in the program itself.
I used this software on different pools and this error (incorrect display) only on MPH and Zpool while all the others do not have problems with speed as and with the calculation of coins. Everything is simple, that shows on the pool, then I'll get, respectively, 2 times less... in my case in 4 times.

p.s. By the way, now me switched with Lyra2rev2 on Scein and my "Hashrate" appeared instantly, exactly like in the client, makes me think about the similarity of the problems at the pool with this algorithm (Lyra2rev2).

NemosMiner is a fork of MultiPoolMiner.

Users have reported problems with Lyra2RE2 and Lyra2z.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: kalimancr on December 16, 2017, 11:52:11 AM

It seems that I will have great losses, this pool is terrible there are no instructions, the data should be more clear, for example simplify and put estimated profits, coins in exchange and profit, it should be very easy but I do not know if they do it on purpose to confuse.

For example in verge-script pool 427 coins appear? and not confirmed for autoexchange 24 coins? Because so little, why not exchange 200 coins?
At this speed it will take weeks to change all the coins Huh

?
Very very very ... confuse

If you are confused then just leave the pool to do its work unless you have a more specific question about the information you are looking at.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: sir_blacks on December 16, 2017, 09:37:19 AM

@miningpoolhub hello

one small question way i can't make excavator mining to your pool noo success to equihash or neoscript

i was use this setting
{"id":1,"method":"algorithm.add","params":["equihash","stratum+tcp://europe.equihash-hub.miningpoolhub.com:20595","user.worker:pass"]} = noo success
or
{"id":1,"method":"algorithm.add","params":["equihash","europe.equihash-hub.miningpoolhub.com:20595","user.worker:pass"]} = noo success

noo success at address europe.equihash-hub.miningpoolhub.com:12023

EWBF.0.3.4b miner it working but with less speed vs Excavator what work perfectly on nanoo, supernova or enyother pool just on your poll it refuse to conect, soo what can i doo ?
i was try run Excavator v.1.3.2.a, v.1.3.3.a, v.1.3.6.a, v.1.3.7.a, v.1.3.8.a
thx

Update:
hmm i found this:

Quote from: aaronsace on December 15, 2017, 01:58:14 PM

MiningPoolHub is blocked be Excavator; try MultiPoolMiner to bypass the block.

Question is WAY was block Excavator & is any chanse to be use in future YES / NO ?!?!?
if NO then time to move from this pool

thx

NiceHash are not 'nice' people contrary to their name.

MultiPoolMiner can launch Excavator on it's own.

jp1981

newbie

Activity: 34

Merit: 0

Are there any issues again with BTC auto exchange?
I have only received half of what I am suppose t receive. Whats going on with this pool?

bitc0intalk

newbie

Activity: 4

Merit: 0

The miningpoolhub scams with the transaction fee size!
Its my monero withdrawal.
No explanations about huge tx fee from the support.
^{16976265 2017-12-16 06:30:03 (UTC) TXFee Confirmed 47VvBUVE...4NMg9kSa n/a 0.01500000
16976264 2017-12-16 06:30:03 (UTC) Debit_MP Confirmed 47VvBUVE...4NMg9kSa f272e14d...9adee17b n/a 0.05746817}

https://pasteboard.co/images/GYwqSUl.jpg/load
https://pasteboard.co/images/GYwrf0z.jpg/load

Max3k

newbie

Activity: 79

Merit: 0

I apologize for the stupid question, can't understand how a pool works. I use NemosMiner, which seems to be doing something, something switches, something there with all sorts of colorful inscriptions where promise the gold mountains =) But all these promises in 0.001btc/day turned into in 0.0004 for 2 days of work. The rate my client is not displayed in any of the active pools, nevertheless, coins appear in my balance... Is it correct to use such software for this pool? Maybe he uses the wrong ports (17***), address for mining (stratum+tcp://hub.miningpoolhub.com)?

If use a regular client manually and with other ports (20XXX) in this case, I see client on site, but, its speed is 2 times less than in the program itself.
I used this software on different pools and this error (incorrect display) only on MPH and Zpool while all the others do not have problems with speed as and with the calculation of coins. Everything is simple, that shows on the pool, then I'll get, respectively, 2 times less... in my case in 4 times.

p.s. By the way, now me switched with Lyra2rev2 on Scein and my "Hashrate" appeared instantly, exactly like in the client, makes me think about the similarity of the problems at the pool with this algorithm (Lyra2rev2).

kalimancr

newbie

Activity: 6

Merit: 0

It seems that I will have great losses, this pool is terrible there are no instructions, the data should be more clear, for example simplify and put estimated profits, coins in exchange and profit, it should be very easy but I do not know if they do it on purpose to confuse.

For example in verge-script pool 427 coins appear? and not confirmed for autoexchange 24 coins? Because so little, why not exchange 200 coins?
At this speed it will take weeks to change all the coins Huh

?
Very very very ... confuse

especial

newbie

Activity: 88

Merit: 0

what happened with eth pool??
i am mining now for 2 days and no profit, mining works ok but nothing shows in my balance, pool url is down

sir_blacks

jr. member

Activity: 119

Merit: 3

@miningpoolhub hello

one small question way i can't make excavator mining to your pool noo success to equihash or neoscript

i was use this setting
{"id":1,"method":"algorithm.add","params":["equihash","stratum+tcp://europe.equihash-hub.miningpoolhub.com:20595","user.worker:pass"]} = noo success
or
{"id":1,"method":"algorithm.add","params":["equihash","europe.equihash-hub.miningpoolhub.com:20595","user.worker:pass"]} = noo success

noo success at address europe.equihash-hub.miningpoolhub.com:12023

EWBF.0.3.4b miner it working but with less speed vs Excavator what work perfectly on nanoo, supernova or enyother pool just on your poll it refuse to conect, soo what can i doo ?
i was try run Excavator v.1.3.2.a, v.1.3.3.a, v.1.3.6.a, v.1.3.7.a, v.1.3.8.a
thx

Update:
hmm i found this:

Quote from: aaronsace on December 15, 2017, 01:58:14 PM

MiningPoolHub is blocked be Excavator; try MultiPoolMiner to bypass the block.

Question is WAY was block Excavator & is any chanse to be use in future YES / NO ?!?!?
if NO then time to move from this pool

thx

btc2017btc2017

member

Activity: 176

Merit: 10

Quote from: aaronsace on December 16, 2017, 05:47:21 AM

Quote from: btc2017btc2017 on December 16, 2017, 05:30:30 AM

Quote from: btc2017btc2017 on December 15, 2017, 07:34:40 PM

Why do I get nothing on some days?

Last 24 Hours   0.00000000
Date   Credit, Credit for Auto Exchange
2017-12-15 (UTC)   0.00000000
2017-12-14 (UTC)   1.16466439
2017-12-13 (UTC)   0.31776325
2017-12-12 (UTC)   0.27126464
2017-12-11 (UTC)   0.00000000
2017-12-10 (UTC)   0.65264833
2017-12-09 (UTC)   0.36224270
2017-12-08 (UTC)   0.74535959
2017-12-07 (UTC)   1.37726285

The hashrate is ok

Looks like there is also no payout for today. I think it's time to leave. 3 days of no payments is crap.

You're not paid on a timer.

This is the page to look at:
https://miningpoolhub.com/?page=account&action=balances

Zpool uses a timer if you want to try that:
http://www.zpool.ca/

Maybe it's wrong to be expected to get paid each day. 3 days loss is $450

wappi

newbie

Activity: 1

Merit: 0

Hi, i have a few questions about hasherate and auto switch algo.

I use awesome miner set to only mine Lyra2rev2, Lyra2z and equihash and autoswitch every 45min. I have miningpoolhub set on nvidia for the same algo switching.

What i see on dashboard or on pool stat in miningpoolhub, my estimate hashrate/earning per day of x coin lets use lyra2rev2 for exemple. My problem is it take around 30 min of mining to show my almost real hashrate on miningpoolhub, but if miningpoolhub decide monacoin is less profitable and switch to vertcoin then my hashrate goes back to poo at half maybe less 60mh instead of 120mh, so if that happen multiple time i get stuck on those low number.

This means i am only getting half of the earning most of the time. What am i doing wrong? or do i get it complety wrong.

I saw on reddit that MultiPoolMiner may be better, why is that? better implamentation with mining pool hub? I tried nemosminer last week on zpool but even if my earning where better than they are now, due to i presume luck or nicehack, my rig crash several times. Awesome miner is at least, for me, stable 24/7.

To summarize is auto switch bad for a small rig?

Thanks,
Wpp

wishxy

full member

Activity: 474

Merit: 101

Houston, we got a problem!

How can I move back my XMR from Debit AE to Credited wallet?

https://prnt.sc/ho91l6

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: btc2017btc2017 on December 16, 2017, 05:30:30 AM

Quote from: btc2017btc2017 on December 15, 2017, 07:34:40 PM

Why do I get nothing on some days?

Last 24 Hours   0.00000000
Date   Credit, Credit for Auto Exchange
2017-12-15 (UTC)   0.00000000
2017-12-14 (UTC)   1.16466439
2017-12-13 (UTC)   0.31776325
2017-12-12 (UTC)   0.27126464
2017-12-11 (UTC)   0.00000000
2017-12-10 (UTC)   0.65264833
2017-12-09 (UTC)   0.36224270
2017-12-08 (UTC)   0.74535959
2017-12-07 (UTC)   1.37726285

The hashrate is ok

Looks like there is also no payout for today. I think it's time to leave. 3 days of no payments is crap.

You're not paid on a timer.

This is the page to look at:
https://miningpoolhub.com/?page=account&action=balances

Zpool uses a timer if you want to try that:
http://www.zpool.ca/

btc2017btc2017

member

Activity: 176

Merit: 10

Quote from: btc2017btc2017 on December 15, 2017, 07:34:40 PM

Why do I get nothing on some days?

Last 24 Hours   0.00000000
Date   Credit, Credit for Auto Exchange
2017-12-15 (UTC)   0.00000000
2017-12-14 (UTC)   1.16466439
2017-12-13 (UTC)   0.31776325
2017-12-12 (UTC)   0.27126464
2017-12-11 (UTC)   0.00000000
2017-12-10 (UTC)   0.65264833
2017-12-09 (UTC)   0.36224270
2017-12-08 (UTC)   0.74535959
2017-12-07 (UTC)   1.37726285

The hashrate is ok

Looks like there is also no payout for today. I think it's time to leave. 3 days of no payments is crap.

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 119. (Read 487870 times)